Background and Need for Legislation
The Innovative Mitigation Partnerships for Asphalt and
Concrete Technologies (IMPACT) Act, aims to strengthen and
enhance the competitiveness of American manufacturing through
the research and development of advanced technologies to
improve the efficiency of cement, concrete, and asphalt
production. This legislation compliments and builds on previous
efforts led by the Science Committee to increase the
competitiveness of U.S. industries while achieving significant
reductions in emissions from manufacturing processes.
While recent emphasis has been placed on reducing power
sector greenhouse gas (GHG) emissions, the ability to
substantially reduce GHGs in the industrial sector remains a
challenge. Cement, concrete, and asphalt production practices
are of particular importance to the industrial sector and play
a fundamental role in supporting U.S. infrastructure, national
defense, and economic security. Yet these production processes
are one of largest manufacturing related sources of carbon
dioxide. Globally, cement facilities account for 8% of
anthropogenic carbon dioxide emissions. Simultaneously,
projected demand for cement is expected to increase 12% by
2050.
To address this pressing challenge, there is a need for
federal investment in next-generation cement, concrete, and
asphalt emission reduction technologies. The U.S. Department of
Energy supports the research and development of industrial
emission reduction technologies primarily through its Office of
Energy Efficiency and Renewable Energy and its Advanced
Manufacturing Office. H.R. 7685 directs the Secretary to carry
out activities in coordination with relevant programs of DOE,
other federal agencies including NIST's Manufacturing USA
Institutes, and with relevant programs and activities
authorized in the Energy Act of 2020.
Legislative History
H.R. 7685 was introduced on March 15, 2024, by
Representative Max Miller (R-OH) and is cosponsored by
Representative Valerie Foushee (D-NC).
Section-by-Section
Section 1. Short title
The short title of this legislation is ``Innovative
Mitigation Partnerships for Asphalt and Concrete Technologies
Act'' or the ``IMPACT Act.''
Section 2. Advanced cement, concrete, and asphalt production research
program
This section amends the Infrastructure Investment and Jobs
Act by inserting a new Section 40525 establishing an advanced
cement, concrete, and asphalt production research program at
the Department of Energy.
Subsection (a) provides definitions related to advanced
production, alternative fuels, commercially available, eligible
entities, engineering performance-based standard, institutions
of higher education, low-emissions cement, concrete, and
asphalt, and rural areas.
Subsection (b) directs the Secretary of Energy, within 180
days, to establish a program of research, development,
demonstration, and commercial application of advanced tools,
technologies, and methods for advanced production and use of
low-emissions cement, concrete, and asphalt.
Subsection (c) ensures the program is carried out in
coordination with all programs and activities related to
industrial and manufacturing technologies authorized in the
Energy Act of 2020, and all relevant program offices of the
Department of Energy. This subsection also directs the program
to leverage the existing research infrastructure of DOE.
Subsection (d) directs the Secretary to develop a 5-year
strategic plan identifying research, development,
demonstration, and commercial application goals for the
program.
Subsection (e) provides focus areas of the program,
including heat generation, carbon capture, resource efficiency,
and high-performance computing.
Subsection (f) directs the Secretary, in collaboration with
the Secretary of Transportation, the Administrator of General
Services, industry partners, institutions of higher education,
and National Laboratories, to support demonstrations of
advanced production of low-emissions cement, concrete, and
asphalt. This subsection ensures regional and technological
diversity among demonstration projects.
Subsection (g) establishes a technical assistance program
for eligible entities seeking to promote the commercial
application of technologies for the production and use of low-
emissions cement, concrete, and asphalt. This program is to be
carried out by DOE in consultation with the Secretary of
Transportation, the Director of the National Institute of
Standards and Technology, the Administrator of General
Services, and the Administrator of the Environmental Protection
Agency.
Subsection (h) ensures the activities authorized by this
bill leverage the resources of existing Manufacturing USA
Institutes of NIST, integrate activities into existing
Manufacturing USA Institutes, and assist in planning,
establishing, or supporting a Manufacturing USA Institute
focused on advanced production of low-emissions cement,
concrete, and asphalt.
Subsection (i) requires the program to terminate seven
years after the date of enactment unless reauthorized.
Subsection (j) requires all authorized activities under
this bill be conducted in compliance with research security
provisions established by the CHIPS and Science Act.
Subsection (k) clarifies that nothing in this bill amends,
alters, or affects the authorities of the Secretary to define,
establish, or enforce new environmental industry standards for,
or related to, cement, concrete, or asphalt.
Related Committee Hearings
Pursuant to clause 3(c)(6) of rule XIII, the following
hearing was used to develop or consider H.R. 7685.
On September 14, 2023, the Full Committee held a hearing
entitled An Update on the Department of Energy's Science and
Technology Priorities. Members and the witness discussed DOE's
goals and priorities for its civilian research, development,
demonstration, and commercial application programs.
Witness:
The Honorable Jennifer Granholm, Secretary
of Energy, U.S. Department of Energy
Committee Consideration
On March 20, 2024, the Committee on Science, Space, and
Technology met in open session to consider H.R. 7685.
Rep. Miller offered a Manager's Amendment, which made minor
technical and conforming changes to the text of the bill. The
amendment was adopted by voice vote.
Rep. Sorensen offered an amendment to add further sections
to align the bill with a similar Senate version of the bill.
The amendment was withdrawn without consideration.
Chairman Lucas moved that the Committee favorably report
the bill, H.R. 7685, as amended, to the House of
Representatives with the recommendation that the bill be
approved. The motion was agreed to by a recorded vote of 38
yeas and 0 nays, a quorum being present.
Roll Call Votes
Clause 3(b) of rule XIII requires the Committee to list the
record votes on the motion to report legislation and amendments
thereto. The following reflects the record votes taken during
the Committee consideration:
[GRAPHIC(S) NOT AVAILABLE IN TIFF FORMAT]
Application of Law to the Legislative Branch
The Committee finds that H.R. 7685 does not relate to the
terms and conditions of employment or access to public services
or accommodations within the meaning of section 102(b)(3) of
the Congressional Accountability Act (Public Law 104-1).
Statement of Oversight Findings and Recommendations
of the Committee
In compliance with clause 3(c)(1) of rule XIII and clause
(2)(b)(1) of rule X, the Committee's oversight findings and
recommendations are reflected in the descriptive portions of
this report.
Statement of General Performance Goals and Objectives
Pursuant to clause (3)(c)(4) of rule XIII, the goal of H.R.
7685 is to strengthen and enhance the competitiveness of
American industry through the research and development of
advanced technologies to improve the efficiency of cement,
concrete, and asphalt production.
Duplication of Federal Programs
Pursuant to clause 3(c)(5) of rule XIII, the Committee
finds that no provision of H.R. 7685 establishes or
reauthorizes a program of the Federal Government known to be
duplicative of another Federal program, including any program
that was included in a report to Congress pursuant to section
21 of Public Law 111-139 or identified in the most recent
Catalog of Federal Domestic Assistance.
Federal Advisory Committee Act
The Committee finds that the legislation does not establish
or authorize the establishment of an advisory committee within
the definition of section 5(b) of the Federal Advisory
Committee Act.
Unfunded Mandate Statement
The Committee adopts as its own the estimate of Federal
mandates prepared by the Director of the Congressional Budget
Office pursuant to section 423 of the Unfunded Mandates Reform
Act.
Earmark Identification
Pursuant to clauses 9(e), 9(f), and 9(g) of rule XXI, the
Committee finds that H.R. 7685 does not include any
congressional earmarks, limited tax benefits, or limited tariff
benefits.
Committee Cost Estimate
Pursuant to clause 3(d)(1) of rule XIII, the Committee
adopts as its own the cost estimate prepared by the Director of
the Congressional Budget Office pursuant to section 402 of the
Congressional Budget Act of 1974. At the time this report was
filed, the estimate was not yet available.
New Budget Authority, Entitlement Authority,
and Tax Expenditures
Pursuant to clause 3(c)(2) of rule XIII, the Committee
finds that H.R. 7685 would result in no new or increased budget
authority, entitlement authority, or tax expenditures or
revenues.
Congressional Budget Office Cost Estimate
Pursuant to clause 3(c)(3) of rule XIII, at the time this
report was filed, the cost estimate prepared by the Director of
the Congressional Budget Office pursuant to section 402 of the
Congressional Budget Act of 1974 was not available.
Changes in Existing Law Made by the Bill, as Reported
In compliance with clause 3(e) of rule XIII of the Rules of
the House of Representatives, changes in existing law made by
the bill, as reported, are shown as follows (new matter is
printed in italics and existing law in which no change is
proposed is shown in roman):
INFRASTRUCTURE INVESTMENT AND JOBS ACT
SECTION 1. SHORT TITLE; TABLE OF CONTENTS.
(a) Short Title.--This Act may be cited as the
``Infrastructure Investment and Jobs Act''.
(b) Table of Contents.--The table of contents for this Act is
as follows:
Sec. 1. Short title; table of contents.
* * * * * * *
DIVISION D--ENERGY
* * * * * * *
TITLE V--ENERGY EFFICIENCY AND BUILDING INFRASTRUCTURE
* * * * * * *
Subtitle C--Industrial Energy Efficiency
PART I--Industry
Sec. 40521. Future of industry program and industrial research and
assessment centers.
Sec. 40522. Sustainable manufacturing initiative.
Sec. 40523. Advanced cement, concrete, and asphalt production research
program.
* * * * * * *
DIVISION D--ENERGY
* * * * * * *
TITLE V--ENERGY EFFICIENCY AND
BUILDING INFRASTRUCTURE
* * * * * * *
Subtitle C--Industrial Energy Efficiency
PART I--INDUSTRY
* * * * * * *
SEC. 40523. ADVANCED CEMENT, CONCRETE, AND ASPHALT PRODUCTION RESEARCH
PROGRAM.
(a) Definitions.--In this section:
(1) Advanced production.--The term ``advanced
production'' means production of cement, concrete, or
asphalt with one or more of the following improvements
with respect to the production of commercially
available cement, concrete, or asphalt:
(A) Improved cost-effectiveness.
(B) Improved quality, durability, engineering
performance, and resilience.
(C) Improved efficiency of resource
consumption and material demand.
(2) Alternative fuels.--The term ``alternative
fuels'' means any solid, liquid, or gaseous materials,
or a combination thereof, used to replace or supplement
any portion of fuels used in combustion or pyrolysis
for low-emissions cement, concrete, or asphalt.
(3) Commercially available.--The term ``commercially
available'', with respect to cement, concrete, and
asphalt, means that the cement, concrete, or asphalt
is--
(A) readily and widely available for purchase
in the United States; and
(B) produced using a production method of
cement, concrete, or asphalt products, as
applicable, that is widely in use.
(4) Eligible entity.--The term ``eligible entity''
means any of the following:
(A) An institution of higher education.
(B) An appropriate State or Federal entity,
including a federally funded research and
development center of the Department.
(C) A nonprofit research institution.
(D) A private entity.
(E) Any other relevant entity the Secretary
determines appropriate.
(F) A partnership or consortium of two or
more entities described in subparagraphs (A)
through (E).
(5) Engineering performance-based standard.--The term
``engineering performance-based standard'' means an
existing engineering standard with respect to which the
requirements applicable to such standard are stated in
terms of required results, with criteria for verifying
compliance rather than specific composition, design, or
procedure.
(6) Institution of higher education.--The term
``institution of higher education'' has the meaning
given such term in section 101 of the Higher Education
Act of 1965 (20 U.S.C. 1001).
(7) Low-emissions cement, concrete, and asphalt.--The
term ``low-emissions cement, concrete, and asphalt''
means cement, concrete, asphalt binder, or asphalt
mixture that reduces, to the maximum extent
practicable, greenhouse gas or directly-related
copollutant emissions to levels below commercially
available cement, concrete, or asphalt.
(8) Rural area.--The term ``rural area'' has the
meaning given such term in section 343(a) of the
Consolidated Farm and Rural Development Act (7 U.S.C.
1991(a)).
(b) Establishment.--Not later than 180 days after the date of
the enactment of this section, the Secretary shall establish a
program of research, development, demonstration, and commercial
application of advanced tools, technologies, and methods for
advanced production and use of low-emissions cement, concrete,
and asphalt in order to--
(1) increase the technological and economic
competitiveness of industry and production in the
United States;
(2) expand and increase the stability of supply
chains through enhanced domestic production,
nearshoring, and cooperation with allies;
(3) achieve measurable greenhouse gas or directly
related copollutant emissions reductions in the
production processes for cement, concrete, and asphalt
products; and
(4) create quality domestic jobs.
(c) Requirements.--In carrying out the program under
subsection (b), the Secretary shall--
(1) coordinate with the programs and activities
authorized under title VI of division Z of the
Consolidated Appropriations Act, 2021 (relating to
industrial and manufacturing technologies) and the
amendments made by such title;
(2) coordinate across all relevant program offices of
the Department, including the Office of Science, the
Advanced Research Projects Agency-Energy, the Office of
Clean Energy Demonstrations, the Office of Energy
Efficiency and Renewable Energy, the Office of Fossil
Energy, the Office of Industrial Efficiency and
Decarbonization, the Office of Manufacturing and Energy
Supply Chains, and the Office of Nuclear Energy;
(3) leverage, to the extent practicable, the research
infrastructure of the Department, including scientific
computing user facilities, x-ray light sources, neutron
scattering facilities, and nanoscale science research
centers; and
(4) conduct research, development, demonstration, and
commercial application of the advanced production of
low-emissions cement, concrete, and asphalt that have
the potential to increase domestic production and
employment in both advanced and commercially available
processes.
(d) Strategic Plan.--
(1) In general.--Not later than 180 days after the
establishment of the program under subsection (b), the
Secretary shall develop a 5-year strategic plan
identifying research, development, demonstration, and
commercial application goals for such program. The
Secretary shall submit such plan to the Committee on
Science, Space, and Technology of the House of
Representatives and the Committee on Energy and Natural
Resources of the Senate.
(2) Contents.--The strategic plan under paragraph (1)
shall--
(A) identify programs at the Department
related to the advanced production of low-
emissions cement, concrete, and asphalt that
support the research, development,
demonstration, and commercial application
activities described in this section, and the
demonstration projects under subsection (f);
(B) establish technological and programmatic
goals to achieve the requirements specified in
subsection (c); and
(C) include timelines for the accomplishment
of such goals developed under the plan.
(3) Updates to plan.--Not less than once every two
years, the Secretary shall submit to the Committee on
Science, Space, and Technology of the House of
Representatives and the Committee on Energy and Natural
Resources of the Senate an updated version of the
strategic plan under paragraph (1).
(e) Focus Areas.--In carrying out the program established in
subsection (c), the Secretary shall focus on the following:
(1) Carbon capture technologies for low-emissions
cement, concrete, and asphalt production processes,
which may include the following:
(A) Oxycombustion and chemical looping
technologies.
(B) Precombustion technologies.
(C) Post combustion technologies.
(D) Direct carbon dioxide separation
technologies.
(2) Materials, technologies, inputs, and processes
that--
(A) produce fewer greenhouse gas or directly
related copollutant emissions during
production, use, and end use of cement,
concrete, and asphalt; or
(B) provide quality, durability, resilience,
engineering, or other performance metrics equal
to or greater than commercially available
products.
(3) Medium- and high-temperature heat-generation
technologies used for the advanced production of low-
emissions cement, concrete, and asphalt which may
include the following:
(A) Alternative fuels.
(B) Renewable heat-generation and storage
technology.
(C) Electrification of heating processes.
(D) Other clean heat-generation technologies
and sources.
(4) Technologies and practices that increase the
efficiency of energy use, natural resource consumption,
or material demand, which may include the following:
(A) Designing products that encourage reuse,
refurbishment, remanufacturing, and recycling.
(B) Minimizing waste, including waste heat,
from low-emissions cement, concrete, and
asphalt production processes, including through
the reuse of waste as a resource in other
industrial processes for mutual benefit.
(C) Increasing the overall energy efficiency
of low-emissions cement, concrete, and asphalt
production processes, including through life
cycle assessments.
(5) Technologies and approaches to reduce greenhouse
gas or directly related copollutant emissions from the
advanced production of cement, concrete, and asphalt.
(6) High-performance computing to develop advanced
materials and production processes that may contribute
to the focus areas described in paragraphs (1) through
(5), including the following:
(A) Modeling, simulation, and optimization of
the design of cost-effective and energy-
efficient products and processes.
(B) The use of digital prototyping and
additive production to enhance product design.
(7) Advanced sensor technologies and methods to
monitor and quantify the performance of low-emissions
cement, concrete, and asphalt materials at scale and
under a variety of conditions.
(8) Technologies that can be retrofitted at cement,
concrete, and asphalt plants that represent the most
common facility types in the United States and in other
countries, with consideration for field validation of
such retrofits.
(9) Best practices for data standardization and data
sharing tools and technologies, in coordination with
relevant Federal agencies.
(10) Fundamental research in chemistry and materials
science to identify the following:
(A) Novel materials and alternative domestic
feedstocks and processing operations for the
advanced production of low-emissions cement,
concrete, and asphalt.
(B) Improved understanding by eligible
entities of the mechanisms that determine the
performance and durability of low-emissions
cement, concrete, and asphalt over time.
(f) Demonstrations.--
(1) Establishment.--Not later than 180 days after the
date of the enactment of this section, the Secretary,
in carrying out the program established in subsection
(b), and in collaboration with the Secretary of
Transportation, the Administrator of General Services,
industry partners, institutions of higher education,
and National Laboratories, shall support demonstrations
of advanced production of low-emissions cement,
concrete, and asphalt that uses either--
(A) a single technology or practice; or
(B) a combination of multiple technologies or
practices.
(2) Selection requirements.--In carrying out the
demonstrations under paragraph (1), the Secretary shall
select eligible entities to carry out demonstration
projects and to the maximum extent practicable--
(A) encourage regional diversity among
eligible entities, including participation by
entities located in rural areas;
(B) encourage technological diversity among
eligible entities; and
(C) ensure that specific projects selected--
(i) expand on the existing technology
demonstration programs of the
Department;
(ii) are based on the extent of
greenhouse gas emissions reductions
achieved; and
(iii) prioritize leveraging matching
funds from non-Federal sources.
(3) Reports.--The Secretary shall submit to the
Committee on Science, Space, and Technology of the
House of Representatives and the Committee on Energy
and Natural Resources of the Senate--
(A) not less frequently than once every two
years for the duration of the demonstrations
under paragraph (1), a report describing the
performance of such demonstratio