Background and Need for Legislation
H.R. 3560 addresses the growing importance of AAM and UAS
technology in various sectors, including transportation,
delivery, and security. The bill recognizes the significant
potential these technologies could have on economic growth and
national security, as well as the need for the United States to
maintain a competitive edge in the global market. It also
acknowledges the challenges presented by China's dominance in
the commercial UAS market and aims to strengthen U.S.
capabilities in manufacturing, research and development, and
security.
The National Drone and Advanced Air Mobility Act addresses
the urgent need to develop and strengthen U.S. capabilities in
the AAM and UAS sectors. By addressing areas of economic
growth, national security, manufacturing capabilities, research
and development, workforce expansion, supply-chain
strengthening, and counter-UAS capabilities, the bill aims to
position the United States as a leader in emerging UAS and AAM
technologies.
Legislative History
H.R. 3560 was introduced on May 22nd, 2023, by
Representative Frank D. Lucas (R-OK).
On May 24, 2023, the Committee on Science, Space, and
Technology met to consider H.R. 3560. Chairman Lucas moved that
Committee favorably report the bill, H.R. 3560, as amended, to
the House of Representatives with the recommendation that the
bill be approved. The motion was agreed to by a vote of 36-0.
Section-by-Section
Section 1. Short title; Table of Contents
The section establishes a table of contents for the bill
and states that the short title of the bill is the ``National
Drone and Advanced Air Mobility Research and Development Act.''
Section 2. Findings
This section contains Congressional findings concerning
unmanned aircraft systems UAS and AAM. UAS have the potential
to transform many sectors of the U.S. economy, including
agriculture, public safety, fire detection, border security,
weather forecasting, and construction. AAM aims to transform
the way people and goods are transported.
This section finds that research, development,
demonstration, testing, and evaluation efforts related to UAS
and AAM systems are critical to understanding both the
capabilities and threats posed by these technologies. UAS and
AAM are subject to safety, privacy, cybersecurity, and supply
chain risks, particularly as many U.S. systems are manufactured
or assembled using parts from foreign countries. The U.S. needs
to invest in domestic manufacturing and secure supply chains of
UAS and AAM to reduce reliance on foreign-made systems.
National and homeland security threats posed by UAS and AAM
include criminal and terrorist use for espionage, surveillance,
and intelligence gathering, smuggling drugs and contraband, and
more.
Many sectors lack voluntary consensus standards for UAS and
AAM. The federal government has an important role in advancing
such voluntary consensus standards, as well as research,
development, and education activities in UAS and AAM by
coordinating with state, local, federal, and tribal
governments, as well as the academic, and private sectors.
Section 3. Definitions
This section provides the meaning of terms used throughout
the legislative text.
Section 4. Purposes
The purpose of this Act is to ensure U.S. leadership in UAS
and AAM, while maximizing benefits and mitigating risks of such
systems. The Federal government will accomplish by supporting
research and development; promoting development of facilities
for UAS and AAM research, testing, and development; mitigating
risks to supply chains, public safety, and national security;
preparing the present and future U.S. workforce for the
integration of UAS and AAM across sectors of the economy;
addressing basic research knowledge gaps; increasing
environmental observations; establishing a strategy to manage
scientific data collected by UAS and AAM; improving interagency
coordination of federal UAS research and development; promoting
research and development collaboration among state, local,
tribal, and federal governments, National Laboratories,
industry and universities; promoting development of voluntary
standards for UAS and AAM; and supporting continued development
of the AAM ecosystem.
TITLE I--INTERAGENCY ACTIVITIES
Sec. 101. Interagency working group
This section establishes an interagency working group
tasked with coordinating Federal research and development
efforts to enable UAS and AAM systems. The working group
includes the National Aeronautics and Space Administration
(NASA), the Department of Transportation (DOT), the National
Oceanic and Atmospheric Administration (NOAA), the National
Science Foundation (NSF), the National Institute of Standards
and Technology (NIST), the Department of Homeland Security
(DHS), and other appropriate federal agencies. The working
group will develop and implement a strategic research plan that
encompasses strategies to strengthen domestic UAS and AAM
supply chains as well as complete an assessment of the U.S. UAS
and AAM competitiveness, including the scope and scale of R&D
investments. The working group is also charged with
facilitating communication and outreach opportunities, as well
as developing partnerships and other opportunities to leverage
knowledge and other resources from other stakeholders,
including academia, industry, and State, local, Tribal, and
Federal government organizations. The group will coordinate
with other Federal departments and agencies to avoid
duplication of activities and will work with the National
Security Council (NSC) to assess and mitigate risks posed by
the Federal UAS fleet. This section also outlines initial and
biennial reports that the working group is responsible for
developing and sending to Congress, as well as a strategic
research plan.
Sec. 102. Strategic research plan
This section directs the interagency working group to
develop a strategic plan for Federal research, development,
deployment, and testing of UAS and AAM technologies. The plan
will establish goals and priorities for Federal efforts for a
10-year period beginning in the year the plan is submitted. The
National Academies of Science, Engineering, and Medicine shall
review the plan every five years. Further, prior to submitting
the plan to Congress, the plan is subject to a 60-day public
comment period.
Sec. 103. Counter-UAS research plan
This section requires the interagency working group to
develop a strategic plan for Federal research, development,
evaluation, and testing of counter-UAS and detection systems,
consistent with counter-UAS legal authorities. The plan will
establish goals and priorities for Federal efforts for a 10-
year period beginning in the year the plan is submitted.
Sec. 104. National drone technology center
Subject to the availability of appropriations, this section
directs the Secretary of Commerce, in collaboration with the
Secretary of Defense, the Secretary of Transportation, and the
heads of other Federal agencies, as appropriate, to establish a
national drone technology center to conduct UAS R&D to
strengthen the economic competitiveness and security of
domestic supply chains. This includes R&D on manufacturing,
design, and components; prototyping that strengthens the entire
domestic ecosystem; and developing strategies for job creation,
skills development, and workforce training for high-quality
jobs. The center is intended to be a public-private sector
consortium with participation from the private sector and NIST.
Sec. 105. GAO study on foreign drones
This section directs the Comptroller General to conduct a
study on the use of foreign-made UAS in the Federal government
and report the findings to Congress within one year of the Acts
enactment.
TITLE II--NATIONAL DRONE AND ADVANCED AIR MOBILITY RESEARCH INSTITUTES
Sec. 201. National Drone and Advanced Air Mobility Research Institutes
This section authorizes the NASA Administrator to establish
a program to award financial assistance for planning,
establishment, and support of a network of institutes for UAS
and AAM research. These institutes may focus on any relevant
implications or challenges to the research, development,
testing, or application of UAS and AAM in different sectors.
The institutes will support and coordinate interdisciplinary
research and development and education activities at all
levels, establish a robust data management strategy, and
support workforce development in UAS- and AAM-related
disciplines.
Institutes may use funding provided by federal agencies to
manage researchers; develop and manage UAS test sites; conduct
research, development, and education activities involving UAS
and AAM; provide access to resources and technical assistance
relevant to the institute's research goals; support the purpose
of UAS and AAM software; engage in outreach to broaden
participation in UAS and AAM research; support artificial
intelligence and machine learning research related to UAS and
AAM and other activities fulfill the funding agency's missions.
The award for financial assistance will be granted based on
a competitive merit review process and will be issued for an
initial period of up to 5 years; established institutes may
apply for extended funding for up to 5 years.
TITLE III--NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY ACTIVITIES
Sec. 301. National Institute of Standards and Technology activities
This section directs the Director of NIST to support and
coordinate the development of UAS voluntary consensus standards
with other federal agencies; support one or more National Drone
and Advanced Air Mobility Research Institute; produce and
prioritize data for high-value UAS and AAM research; and
coordinate with other stakeholders in furtherance of the
purposes of the Act. Pursuant to appropriations, the Director
of NIST will carry out a competitive program to award prizes to
stimulate research and development of innovative UAS and AAM
technologies.
Sec. 302. National Institute of Standards and Technology Manufacturing
activities
This section amends the NIST Act to include support for
domestic manufacturing of critical and emerging technologies as
part of the Manufacturing Extension Partnership expansion
awards program. This section also directs NIST to select UAS as
the initial topic of an expansion awards pilot program.
To understand the manufacturing capabilities in the U.S.,
the Director will conduct a survey of Manufacturing Extension
Partnership Centers no later than a year from the establishment
of the Act. This section also updates the Manufacturing USA
program to include UAS manufacturing R&D.
TITLE IV--NATIONAL SCIENCE FOUNDATION ACTIVITIES
Sec. 401. National Science Foundation activities
This section directs the Director of NSF to support
research, STEM education, and related activities in UAS and
AAM. As part of the initiative, NSF will support fundamental
research on the underlying technologies, R&D on UAS- and AAM-
enabled uses, data modeling of uses, security, and ethical uses
of UAS. The agency will support middle and high school-level
STEM education research relevant to UAS and AAM technologies,
and undergraduate and graduate education and workforce
development. The NSF Director is also charged with supporting
public-private partnerships to support domestic development and
address pre-competitive industry challenges.
TITLE V--NATIONAL AERONAUTICS AND SPACE ADMINISTRATION ACTIVITIES
Sec. 501. National Aeronautics and Space Administration activities
This section directs the Administrator of NASA, in
consultation with the Administrator of the Federal Aviation
Administration (FAA), to carry out research and development to
facilitate the safe integration of UAS and AAM into the
National Airspace System (NAS). NASA is also directed to inform
the development of voluntary standards to facilitate the
incorporation of UAS and AAM systems into the NAS.
Sec. 502. National student Unmanned Aircraft Systems competition
program
This section directs the Administrator of NASA to lead a
national pilot program for UAS technology competitions for
students at the high school and undergraduate levels in which
students will design, create, and demonstrate UAS. The
Administrator shall award a grant to an eligible nonprofit
organization, institution of higher education, or consortium to
administer the pilot program.
TITLE VI--DEPARTMENT OF ENERGY ACTIVITIES
Sec. 601. Department of Energy research activities
This section directs the Secretary of Energy to carry out a
cross-cutting research, development, and demonstration program
to advance UAS technologies, capabilities, and workforce needs
to improve the reliability of the use of UAS in ways relevant
to the mission of the Department of Energy (DOE). In carrying
out these activities, DOE shall provide research, experience
and training for undergraduate and graduate students and
formulate goals for UAS research activities. The Secretary of
Energy will award financial assistance to eligible entities to
carry out research, development, and demonstration projects in
certain areas, including fundamental science and technology, as
well as approaches for leveraging UAS for diverse applications.
This will also include making DOE facilities available to
eligible entities and support technology transfer to industry
through partnerships.
TITLE VII--DEPARTMENT OF HOMELAND SECURITY ACTIVITIES
Sec. 701. Department of Homeland Security activities
This section directs the Secretary of the DHS, acting
though the Under Secretary for Science and Technology, in
coordination with the FAA and heads of other relevant Federal
agencies, to support research, development, evaluation, and
testing of UAS, AAM, and counter-UAS systems and detection
systems.
It also directs the Secretary to establish a center of
excellence to carry out research and development activities to
support and advance counter-UAS capabilities. The Secretary
will select a higher education institution to host and maintain
the center of excellence and carry out the fundamental
research, evaluation, education, workforce development, and
training efforts in DHS-related counter-UAS systems.
TITLE VIII--NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION ACTIVITIES
Sec. 801. National Oceanic and Atmospheric Administration research and
development
This section directs the Administrator of NOAA to carry out
and support research, development, and demonstration activities
to advance UAS technologies and capabilities and to enhance the
deployment of UAS relevant to the mission of NOAA. In
particular, the Administrator shall prioritize activities that
increase NOAA's operational use of UAS by extending the range
of times, location, and conditions in which observations can be
made at lower cost. The Administrator is also responsible for
coordinating NOAA's activities with other Federal departments
and agencies, research communities, nongovernmental
organizations, and industry stakeholders through an interagency
committee.
In carrying out these activities, NOAA will award financial
assistance to eligible entities for projects on the use of UAS
to collect environmental data and monitor climate impacts
including weather forecasting, rapid flood mapping, enhanced
atmospheric monitoring, marine mammal detection, harmful algal
bloom measurements, navigation safety, wildfire observations,
and other areas related to science and stewardship of any areas
NOAA deems necessary and appropriate.
TITLE IX--FEDERAL AVIATION ADMINISTRATION ACTIVITIES
Sec. 901. Federal Aviation Administration research and development
This section directs FAA to coordinate with NASA and other
agencies to carry out and support research, development,
testing, and demonstration activities to advance UAS and AAM
and to facilitate the safe integration of UAS and AAM into the
national airspace system. This includes research on approaches
to evaluating risk in emerging vehicles, technologies, and
operations for UAS and AAM systems.
As part of these activities, FAA will conduct comprehensive
research and testing on UAS and AAM safety and risks and report
the results of this research to the House Committee on Science,
Space, and Technology and the Senate Committee on Commerce,
Science, and Transportation.
Sec. 902. Partnerships for research, development, demonstration, and
testing
This section directs the Administrator of the FAA to enter
into an arrangement with the National Academy of Public
Administration to examine Administration research, development,
demonstration, and testing partnerships to advance UAS and AAM
and to facilitate the safe integration of UAS into the NAS.
Sec. 903. UAS test ranges and operations
This section amends title 49 of the U.S. Code by extending
sunset provisions for UAS test ranges and special authorities
for certain unmanned aircraft systems to 2028. This section
also adds UAS traffic management, AAM concepts in controlled
airspace, verification and validation, and cybersecurity for
UAS test range programming. This section also adds language on
reporting requirements for waivers and implementation for UAS
test ranges and special authorities for certain UAS.
Sec. 904. Authorization of appropriations
This section lists the funds authorized to be appropriated
to the Federal Aviation Administration to carry out UAS
research and development activities from 2024-2028.
Sec. 905. Definitions
This section provides the meaning of terms used throughout
Title IX.
TITLE X--LIMITATION
Sec. 1001. Limitation
This section provides limitations on how funds authorized
to be appropriated by this act may be used, as well as the
conditions under which the limitations can be waived.
Committee Consideration
On March 29, 2023, the Committee met in open session and
ordered reported favorably the bill, H.R. 3560, as amended, by
a recorded vote of 36 yeas and 0 nays, a quorum being present.
Roll Call Votes
Clause 3(b) of rule XIII requires the Committee to list the
record votes on the motion to report legislation and amendments
thereto. The following reflects the record votes taken during
the Committee consideration:
Application of Law to the Legislative Branch
The Committee finds that H.R. 3560 does not relate to the
terms and conditions of employment or access to public services
or accommodations within the meaning of section 102(b)(3) of
the Congressional Accountability Act (Public Law 104-1).
Statement of Oversight Findings and Recommendations of the Committee
In compliance with clause 3(c)(1) of rule XIII and clause
(2)(b)(1) of rule X, the Committee's oversight findings and
recommendations are reflected in the descriptive portions of
this report.
Statement of General Performance Goals and Objectives
Pursuant to clause (3)(c)(4) of rule XIII and clause
(2)(b)(1) of rule X, the goal of H.R. 3560 is to ensure United
States leadership in unmanned aircraft systems (UAS) and
advanced air mobility (AAM) by supporting research and
development (R&D), improving interagency planning and
coordination, and promoting domestic manufacturing.
Duplication of Federal Programs
Pursuant to clause 3(c)(5) of rule XIII, the Committee
finds that no provision of H.R. 3560 establishes or
reauthorizes a program of the Federal Government known to be
duplicative of another Federal program, including any program
that was included in a report to Congress pursuant to section
21 of Public Law 111-139 or identified in the most recent
Catalog of Federal Domestic Assistance.
Federal Advisory Committee Act
The Committee finds that the legislation directs the
establishment of an advisory committee within the definition of
section 5(b) of the Federal Advisory Committee Act.
Unfunded Mandate Statement
The Committee adopts as its own the estimate of Federal
mandates prepared by the Director of the Congressional Budget
Office pursuant to section 423 of the Unfunded Mandates Reform
Act. At the time this report was filed, the estimate was not
yet available.
Earmark Identification
Pursuant to clauses 9(e), 9(f), and 9(g) of rule XXI, the
Committee finds that H.R. 3560 does not include any
congressional earmarks, limited tax benefits, or limited tariff
benefits.
Committee Cost Estimate
Pursuant to clause 3(d)(1) of rule XIII, the Committee
adopts as its own the cost estimate prepared by the Director of
the Congressional Budget Office pursuant to section 402 of the
Congressional Budget Act of 1974. At the time this report was
filed, the estimate was not yet available.
New Budget Authority, Entitlement Authority, and Tax Expenditures
Pursuant to clause 3(c)(2) of rule XIII, the Committee
finds that H.R. 3560 would result in no new or increased budget
authority, entitlement authority, or tax expenditures or
revenues.
Congressional Budget Office Cost Estimate
Pursuant to clause 3(c)(3) of rule XIII, at the time this
report was filed, the cost estimate prepared by the Director of
the Congressional Budget Office pursuant to section 402 of the
Congressional Budget Act of 1974 was not yet available.
Changes in Existing Law Made by the Bill, as Reported
In compliance with clause 3(e) of rule XIII of the Rules of
the House of Representatives, changes in existing law made by
the bill, as reported, are shown as follows (existing law
proposed to be omitted is enclosed in black brackets, new
matter is printed in italics, and existing law in which no
change is proposed is shown in roman):
NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY ACT
* * * * * * *
SEC. 25B. EXPANSION AWARDS PILOT PROGRAM.
(a) Definitions.--The terms used in this section have the
meanings given the terms in section 25.
(b) Establishment.--The Director shall establish, subject to
the availability of appropriations, as a part of the Hollings
Manufacturing Extension Partnership under sections 25 and 25A,
a pilot program of expansion awards among participants
described in subsection (c) for the purposes described in
subsection (e).
(c) Participants.--Participants receiving awards under this
section shall be Centers, or a consortium of Centers (as such
term is defined in section 25).
(d) Award Amounts.--Subject to the availability of
appropriations, an award for a recipient under this section
shall be in an amount equal to the sum of the following:
(1) Such amount as the Director considers appropriate
as a minimum base funding level for each award under
this section.
(2) Such additional amount as the Director considers
in proportion to the manufacturing density of the
region of the recipient.
(3) Such supplemental amounts as the Director
considers appropriate.
(e) Purpose of Awards.--An award under this section shall be
made for one or more of the following purposes:
(1) To provide worker education, training,
development, and entrepreneurship training and to
connect individuals or business with such services
offered in their community, which may include employee
ownership and workforce training, including connecting
manufacturers with career and technical education
entities, institutions of higher education (including
community colleges), workforce development boards,
labor organizations, and nonprofit job training
providers to develop and support training and job
placement services, including apprenticeship and online
learning platforms, for new and incumbent workers,
programming to prevent job losses when adopting new
technologies and processes, and development of employee
ownership practices.
(2) To provide services to improve the resiliency of
domestic supply chains.
(3) To mitigate vulnerabilities to cyberattacks,
including helping to offset the cost of cybersecurity
projects for small manufacturers.
(4) To expand advanced technology services to United
States-based small- and medium-sized manufacturers,
which may include--
(A) developing technology demonstration
laboratories;
(B) training and demonstration in areas of
supply chain and critical technology needs,
including a focus on the demonstration of
technologies developed by companies based in
the United States;
(C) services for the adoption of advanced
technologies, including smart manufacturing
technologies and practices; and
(D) establishing partnerships, for the
development, demonstration, and deployment of
advanced technologies, with--
(i) national laboratories (as defined
in section 2 of the Energy Policy Act
of 2005 (42 U.S.C. 15801));
(ii) Federal laboratories;
(iii) Manufacturing USA institutes
(as described in section 34(d)); and
(iv) institutions of higher
education.
(5) To build capabilities across the Hollings
Manufacturing Extension Partnership for domestic supply
chain resiliency and optimization, including--
(A) assessment of domestic manufacturing
capabilities, expanded capacity for researching
and deploying information on supply chain risk,
hidden costs of reliance on offshore suppliers,
redesigning products and processes to encourage
reshoring, and other relevant topics; and
(B) expanded services to provide industrywide
support that assists United States
manufacturers with reshoring manufacturing to
strengthen the resiliency of domestic supply
chains, including in critical technology areas
and foundational manufacturing capabilities
that are key to domestic manufacturing
competitiveness and resiliency, including
forming, casting, machining, joining, surface
treatment, tooling, and metal or chemical
refining.
(6) to support the domestic manufacturing of critical
and emerging technologies and reduce the supply chain
risk of these technologies;
(f) Topic Selection.--The Director may select topics for
awards made under paragraph (e)(6) in accordance with the
following:
(1) The Director shall select unmanned aircraft
systems as an initial topic for the pilot program.
(2) The Director may select additional topics that
the Director determines are--
(A) rapidly evolving; and
(B) of high importance to the economy and
security of the United States.
[(f)] (g) Reimbursement.--The Director may reimburse Centers
for costs incurred by the Centers under this section.
[(g)] (h) Applications.--Applications for awards under this
section shall be submitted in such manner, at such time, and
containing such information as the Director shall require in
consultation with the Manufacturing Extension Partnership
Advisory Board.
[(h)] (i) Selection.--
(1) Reviewed and merit-based.--The Director shall
ensure that awards under this section are reviewed and
merit-based.
(2) Geographic diversity.--The Director shall
endeavor to have broad geographic diversity among
selected proposals.
(3) Criteria.--The Director shall select applications
consistent with the purposes identified pursuant to
subsection (e) to receive awards that the Director
determines will achieve one or more of the following:
(A) Improvement of the competitiveness of
industries in the region in which the Center or
Centers are located.
(B) Creation of jobs or training of newly
hired employees.
(C) Promotion of the transfer and
commercialization of research and technology
from institutions of higher education, national
laboratories, or other federally funded
research programs, and nonprofit research
institutes.
(D) Recruitment of a diverse manufacturing
workforce, including through outreach to
underrepresented populations, including
individuals identified in section 33 or section
34 of the Science and Engineering Equal
Opportunities Act (42 U.S.C. 1885a, 1885b).
(E) Any other result the Director determines
will advance the objective set forth in section
25(c) or 25A.
[(i)] (j) Program Contribution.--Recipients of awards under
this section shall not be required to provide a matching
contribution.
[(j)] (k) Global Marketplace Projects.--In making an award
under this section, the Director, in consultation with the
Manufacturing Extension Partnership Advisory Board and the
Secretary, may take into consideration whether an application
has significant potential for enhancing the competitiveness of
small and medium-sized United States manufacturers in the
global marketplace.
[(k)] (l) Duration.--The Director shall ensure that the
duration of an award under this section is aligned and
consistent with a Center's cooperative agreement established in
section 25(e).
[(l)] (m) Report.--Not later than October 1, 2025, the
Director shall submit to Congress a report that includes--
(1) a summary description of what activities were
funded and the measurable outcomes of such activities;
(2) a description of which types of activities under
paragraph (1) could remain as part of a permanent
expansion awards program;
(3) a description of which types of activities under
paragraph (1) could be integrated into, and supported
under, the program under section 25;
(4) a description of which types of activities under
paragraph (1) could be integrated into, and supported
under, the competitive awards program under section
25A; and
(5) a recommendation, supported by a clear
explanation, as to whether the pilot program should be
continued.
* * * * * * *
SEC. 34. MANUFACTURING USA.
(a) Definitions.--In this section:
(1) Agency head.--The term ``agency head'' means the
head of any Executive agency (as defined in section 105
of title 5, United States Code), other than the
Department of Defense.
(2) Regional innovation initiative.--The term
``regional innovation initiative'' has the meaning
given such term in section 27(f)(1) of the Stevenson-
Wydler Technology Innovation Act of 1980 (15 U.S.C.
3722(f)(1)).
(b) Establishment of Manufacturing USA Program.--
(1) In general.--The Secretary shall establish within
the Institute a program to be known as the
``Manufacturing United States of America Program'' or
the ``Manufacturing USA Program'' (referred to in this
section as the ``Program'').
(2) Purposes of program.--The purposes of the Program
are--
(A) to improve the competitiveness of United
States manufacturing and to increase the
production of goods manufactured predominantly
within the United States;
(B) to stimulate United States leadership in
advanced manufacturing research, innovation,
and technology;
(C) to facilitate the transition of
innovative technologies into scalable, cost-
effective, and high-performing manufacturing
capabilities;
(D) to facilitate access by manufacturing
enterprises to capital-intensive
infrastructure, including high-performance
electronics and computing, and the supply
chains that enable these technologies;
(E) to accelerate the development of an
advanced manufacturing workforce;
(F) to facilitate peer exchange of and the
documentation of best practices in addressing
advanced manufacturing challenges;
(G) to leverage non-Federal sources of
support to promote a stable and sustainable
business model without the need for long-term
Federal funding;
(H) to create and preserve jobs; and
(I) to contribute to the development of
regional innovation initiatives across the
United States.
(3) Support.--The Secretary, acting through the
Director, shall carry out the purposes set forth in
paragraph (2) by supporting--
(A) the Manufacturing USA Network established
under subsection (b); and
(B) the establishment of Manufacturing USA
institutes.
(4) Director.--The Secretary shall carry out the
Program through the Director.
(c) Establishment of Manufacturing USA Network.--
(1) In general.--As part of the Program, the
Secretary shall establish a network of Manufacturing
USA institutes.
(2) Designation.--The network established under
paragraph (1) shall be known as the ``Manufacturing
United States of America Network'' or the
``Manufacturing USA Network'' (referred to in this
section as the ``Network'').
(d) Manufacturing USA Institutes.--
(1) In general.--For purposes of this section, a
Manufacturing USA institute is an institute that--
(A) has been established by a person or group
of persons to address challenges in advanced
manufacturing and to assist manufacturers in
retaining or expanding industrial production
and jobs in the United States;
(B) has a predominant focus on a
manufacturing process, novel material, enabling
technology, supply chain integration
methodology, or another relevant aspect of
advanced manufacturing, such as nanotechnology
applications, advanced ceramics, photonics and
optics, composites, biobased and advanced
materials, flexible hybrid technologies, tool
development for microelectronics, food
manufacturing, superconductors, advanced
battery technologies, robotics, advanced
sensors, quantum information science, supply
chain water optimization, aeronautics and
advanced materials, including unmanned aircraft
systems, and graphene and graphene
commercialization;
(C) has the potential--
(i) to improve the competitiveness of
United States manufacturing, including
key advanced manufacturing technologies
such as nanotechnology, advanced
ceramics, photonics and optics,
composites, biobased and advanced
materials, flexible hybrid
technologies, tool development for
microelectronics, food manufacturing,
superconductors, advanced battery
technologies, robotics, advanced
sensors, quantum information science,
supply chain water optimization,
aeronautics and advanced materials, and
graphene and graphene
commercialization;
(ii) to accelerate non-Federal
investment in advanced manufacturing
production capacity in the United
States; or
(iii) to enable the commercial
application of new technologies or
industry-wide manufacturing processes;
and
(D) includes active participation among
representatives from multiple industrial
entities, research universities, community
colleges, and other