Dissenting Views
[To accompany H.J. Res. 44]
The Committee on the Judiciary, to whom was referred the
joint resolution (H.J. Res. 44) providing for congressional
disapproval under chapter 8 of title 5, United States Code, of
the rule submitted by the Bureau of Alcohol, Tobacco, Firearms,
and Explosives relating to ``Factoring Criteria for Firearms
with Attached `Stabilizing Braces''', having considered the
same, reports favorably thereon without amendment and
recommends that the joint resolution do pass.
CONTENTS
Page
Purpose and Summary.............................................. 2
Background and Need for the Legislation.......................... 2
Hearings......................................................... 4
Committee Consideration.......................................... 5
Committee Votes.................................................. 5
Committee Oversight Findings..................................... 7
New Budget Authority and Tax Expenditures........................ 7
Congressional Budget Office Cost Estimate........................ 7
Committee Estimate of Budgetary Effects.......................... 7
Duplication of Federal Programs.................................. 7
Performance Goals and Objectives................................. 7
Advisory on Earmarks............................................. 8
Federal Mandates Statement....................................... 8
Advisory Committee Statement..................................... 8
Applicability to Legislative Branch.............................. 8
Section-by-Section Analysis...................................... 8
Dissenting Views................................................. 8
Purpose and Summary
H.J. Res. 44, introduced by Rep. Andrew Clyde (R-GA), would
nullify a final rule of the Bureau of Alcohol, Tobacco,
Firearms, and Explosives (ATF) titled, ``Factoring Criteria for
Firearms with Attached `Stabilizing Braces,''' and would
prevent the ATF from issuing a substantially similar rule in
the future.
Background and Need for the Legislation
On January 31, 2023, the ATF issued a final rule titled,
``Factoring Criteria for Firearms with Attached `Stabilizing
Braces,''' that effectively bans pistol stabilizing braces
nationwide.\1\ The final rule upsets longstanding reliance
interests of law-abiding gun owners without the political
accountability or public debate that would ordinarily accompany
such a policy change if it were to be imposed by Congress. The
final rule provides that pistols equipped with stabilizing
braces meet the definition of a firearm under the National
Firearms Act, and that ``[a]ny weapons with `stabilizing
braces'' or similar attachments that constitute rifles under
the [National Firearms Act] must be registered.''\2\ Under the
final rule, millions of gun owners will have to remove their
stabilizing braces from their pistols so that they cannot be
reattached, install longer gun barrels, register their firearms
as short-barreled rifles, turn their firearms over to the ATF,
or destroy their braced firearms--or face felony charges.\3\
---------------------------------------------------------------------------
\1\ Factoring Criteria for Firearms With Attached ``Stabilizing
Braces,'' 88 Fed. Reg. 6478 (Jan. 31, 2023).
\2\ Id.
\3\ Id.
---------------------------------------------------------------------------
A pistol brace or stabilizing brace ``is an accessory that
attaches to the rear of [a] gun,'' which helps to stabilize it
while firing and allows the gun to be used with one hand.\4\
Pistol braces were invented by Alex Bosco, a U.S. Marine Corps
and Army veteran, to help a friend and disabled combat veteran
to better control and safely fire his gun at the shooting
range.\5\ In November 2012, the ATF advised SB Tactical--
Bosco's company--that its stabilizing brace did not convert a
pistol into a short-barreled rifle.\6\ In a similar letter
dated March 5, 2014, in response to an inquiry from the
Greenwood, Colorado, County Police Department, the ATF
explained that ``certain firearm accessories such as the SIG
Stability Brace have not been classified by ATF Firearms
Technology Branch as shoulder stocks, and, therefore, using the
brace improperly does not constitute a design change.''\7\ In
the letter, the ATF also stated that ``using such an accessory
would not change the classification of the weapon per Federal
law.''\8\ Because a pistol that was operated using a
stabilizing brace would remain classified as a pistol, it would
not be subject to the registration and taxation requirements
applicable to short-barreled rifles under the National Firearms
Act.\9\
---------------------------------------------------------------------------
\4\Jacki Billings, Pistol Braces & The ATF: What You Need to Know,
Pew Pew Tactical (Feb. 1, 2023), https://www.pewpewtactical.com/pistol-
braces-and-the-atf/.
\5\See The Company, SB Tactical, https://www.sb-tactical.com/about/
company/.
\6\ Id.
\7\Letter from Earl Griffith, Chief, Firearms Technology Branch,
Bureau of Alcohol, Tobacco, Firearms, and Explosives, to Sergeant Joe
Bradley (Mar. 5, 2014), available at https://www.guntrustlawyer.com/
files/2015/02/sb15.pdf.
\8\Id.
\9\See 26 U.S.C. Sec. Sec. 5811(a) (imposing a $200 transfer tax on
firearms), 5841 (requiring registration of firearms), 5845 (defining
``firearm'').
---------------------------------------------------------------------------
Acting in reliance upon the ATF's guidance for nearly a
decade, Americans have legally purchased and used an estimated
ten million to forty million pistol braces.\10\ However, in
December 2020, the ATF published guidance addressing whether
``firearms with an attached stabilizing brace . . . are
considered firearms under the National Firearms Act.''\11\ The
ATF withdrew this guidance less than two weeks later in the
wake of heavy criticism.\12\ In June 2021, the Biden ATF issued
a proposed rule that included a scorecard for use in
determining when pistols with attached stabilizing braces might
be deemed to be short-barreled rifles subject to the
registration and taxation requirements of the National Firearms
Act.\13\ The ATF's proposed rule sustained heavy criticism,
including from Republicans on the Judiciary Committee.\14\ The
ATF finalized this rule in January 2023.
---------------------------------------------------------------------------
\10\William J. Krouse, IF11763, Cong. Research Serv., Handguns,
Stabilizing Braces, and Related Components 2 (Apr. 19, 2021).
\11\Objective Factors for Classifying Weapons with ``Stabilizing
Braces,'' 85 Fed. Reg. 82,516, 82,516 (Dec. 18, 2020).
\12\Objective Factors for Classifying Weapons With ``Stabilizing
Braces''; Withdrawal of Guidance, 85 Fed. Reg. 86,948, 86,948 (Dec. 31,
2020).
\13\Factoring Criteria for Firearms With Attached ``Stabilizing
Braces,'' 86 Fed. Reg. 30,826 (June 10, 2021).
\14\Letter from Rep. Jim Jordan, Ranking Member, H. Comm. on the
Judiciary et al. to Marvin Richardson, Acting Director, ATF (July 16,
2021), https://judiciary.house.gov/sites/evo-subsites/republicans-
judiciary.house.gov/files/2021-07/2021-07-16-HJC-GOP-to-ATF-re-Pistol-
Brace-Notice31.pdf.
---------------------------------------------------------------------------
The ATF's actions illustrate the dangers of an unchecked
administrative state that is willing to make policy--policy
that will convert lawful gun owners into felons if they do not
comply--even when it is not authorized to do so by Congress.
The pistol brace rule exceeds the ATF's statutory authority.
Congress has neither criminalized the use of pistol braces
under the Gun Control Act nor authorized their regulation under
the National Firearms Act.\15\ The ATF, in this rule, attempts
to do both. The rule contradicts years of ATF guidance,
upsetting the long-standing reliance interests of gun owners
and manufacturers alike.\16\
---------------------------------------------------------------------------
\15\Id. at 2.
\16\Id.; cf. Encino Motorcars, LLC v. Navarro, 579 U.S. 211, 222
(2016).
---------------------------------------------------------------------------
In addition to going beyond ATF's statutory authority, the
pistol brace rule will have a detrimental impact on the
firearms industry. The ATF itself has estimated the costs of
complying with its rule to be between $242.4 million and $263.6
million per year.\17\ An independent analysis of the financial
harm to the firearms industry from a pistol brace ban projected
losses to exceed $1 billion.\18\ Millions of law-abiding
Americans will have to cease using their guns, comply with
onerous registration requirements, or risk felony charges.\19\
Disabled persons, including the disabled veterans for whom the
pistol brace originally was created, will lose the benefit of
this useful tool, and potentially their ability to safely
operate certain firearms entirely.\20\
---------------------------------------------------------------------------
\17\See 88 Fed. Reg. at 6573.
\18\See Jeremy S., ATF Pistol Brace Crackdown Would Destroy--Is
Destroying--Thousands of Jobs and Billions of Dollars, The Truth About
Guns (Dec. 20, 2020), https://www.thetruthaboutguns.com/atf-pistol-
brace-crackdown-would-destroy-thousands-of-jobs-and-
billions-of-dollars/.
\19\Gun Owners of America, supra note 2.
\20\The Company, supra note 4.
---------------------------------------------------------------------------
Hearings
For the purposes of clause 3(c)(6)(A) of House rule XIII,
the following hearings were used to develop H.J. Res. 44:
``Reining in the Administrative State: Reclaiming Congress's
Legislative Power'' a hearing held on March 10, 2023, before
the House Judiciary Committee, Subcommittee on the
Administrative State, Regulatory Reform, and Antitrust. The
Subcommittee heard testimony from the following witnesses:
Allyson N. Ho, Partner and Co-Chair of
Appellate and Constitutional Law, Gibson, Dunn &
Crutcher LLP;
Jonathan Wolfson, Chief Legal Officer and
Policy Director, Cicero Institute;
Ryan Cleckner Co-Founder, Gun University LLC
and Owner, Law Office of Ryan M. Cleckner; and
Emily Hammond, Professor, The George
Washington University Law School.
This hearing focused on the ways in which the modern
administrative state has usurped Congress's lawmaking
authority. Ryan Cleckner, one of the Republican witnesses and
an attorney specializing in federal firearms law and ATF
compliance, discussed the ATF's overreach with respect to
rulemaking in the context of the stabilizing brace rule. He
pointed out that the ATF previously approved of this pistol
brace and the agency's shifting position on this matter left
citizens confused about what is lawful.
The Judiciary Committee also held a hearing titled ``ATF's
Assault on the Second Amendment: When Is Enough?'' a hearing
held on March 23, 2023, before the House Committee on Oversight
and Accountability, Subcommittee on Economic Growth, Energy
Policy, and Regulatory Affairs, and the House Committee on the
Judiciary, Subcommittee on Crime and Federal Government
Surveillance. The Committee heard testimony from the following
witnesses:
Amy Swearer, Senior Legal Fellow, the
Heritage Foundation;
Alex Bosco, Founder and Inventor of the
Stabilizing Brace;
Matthew Larosiere, Partner, Zermay
Larosiere; and
Rob Wilcox, Federal Legal Director,
Everytown for Gun Safety.
The hearing addressed how President Biden's ATF has abused
its rulemaking authority by regulating pistol stabilizing
braces attached to stabilizing braces as short-barreled rifles
under the National Firearms Act of 1934 and by wrongfully
redefining privately made firearm kits--derisively known as so
called ``ghost guns''--as traditional firearms. Additionally,
the hearing addressed President Biden's June 2021 directive to
the Justice Department to adopt a zero-tolerance policy to
revoke federal firearms licenses from those who committed
``willful'' violations of the law.\21\ Alex Bosco, founder of
the SB Tactical Pistol Brace, testified about the process of
the getting approval for the pistol brace from the Obama ATF in
2012, and the devastating financial impact the final rule has
had on his company, including his employees.\22\ Experts at the
hearing also pointed out that both the pistol brace rule and
the frame and receiver rule will not stop criminals from
accessing firearms, but will only serve to criminalize innocent
civilians.\23\
---------------------------------------------------------------------------
\21\Press Release, The White House, Biden-Harris Administration
Announces Comprehensive Strategy to Prevent and Respond to Gun Crime
and Ensure Public Safety (Jun. 23, 2021), available at https://
www.whitehouse.gov/briefing-room/statements-releases/2021/06/23/
factsheet-biden-harris-administration-announces-comprehensive-strategy-
to-prevent-and-respond-to-gun-crime-and-ensure-public-safety/.
\22\ATF's Assault on the Second Amendment: When Is Enough?: Joint
Hearing Before the H. Comm. on Oversight and Accountability,
Subcommittee on Economic Growth, Energy Policy, and Regulatory Affairs,
and the House Committee on the Judiciary, Subcommittee on Crime and
Federal Government Surveillance, 118th Con. 24-25 (2023) (statement by
Alex Bosco).
\23\Id. at 158-159 (statement by Amy Swearer).
---------------------------------------------------------------------------
The Judiciary Committee also held a hearing titled
``Oversight of the Bureau of Alcohol, Tobacco, Firearms, and
Explosives'' on April 26, 2023. The Committee heard testimony
from the following witnesses:
The Honorable Steve Dettelbach, Director,
Bureau of Alcohol, Tobacco, Firearms, and Explosives.
The hearing allowed members to ask Director Dettelbach
about the agency's efforts to regulate pistol stabilizing
braces and PMFs through the rulemaking process. Additionally,
members were able to ask Director Dettelbach about the ATF's
``zero tolerance'' policy towards FFLs.
Committee Consideration
On April 19, 2023, the Committee met in open session and
ordered the bill, H.J. Res. 44, favorably reported, by a vote
of 23 to 15, a quorum being present.
Committee Votes
In compliance with clause 3(b) of House rule XIII, the
following roll call votes occurred during the Committee's
consideration of H.J. Res. 44:
1. Vote on Favorably Reporting H.J. Res. 44, passed 23-15.
Committee Oversight Findings
In compliance with clause 3(c)(1) of House rule XIII, the
Committee advises that the findings and recommendations of the
Committee, based on oversight activities under clause 2(b)(1)
of rule X of the Rules of the House of Representatives, are
incorporated in the descriptive portions of this report.
New Budget Authority and Tax Expenditures
With respect to the requirements of clause 3(c)(2) of rule
XIII of the Rules of the House of Representatives and section
308(a) of the Congressional Budget Act of 1974 and with respect
to eh requirements of clause 3(c)(3) of rule XIII of the Rules
of the House of Representatives and section 402 of the
Congressional Budget Act of 1974, the Committee has requested
but not received a cost estimate for this bill from the
Director of the Congressional Budget Office. The Committee has
requested but not received from the Director of the
Congressional Budget Office a statement as to whether this bill
contains any new budget authority, spending authority, credit
authority, or an increase or decrease in revenues or tax
expenditures. The Chairman of the Committee shall cause such
estimate and statement to be printed in the Congressional
Record upon its receipt by the Committee.
Congressional Budget Office Cost Estimate
With respect to the requirement of clause 3(c)(3) of rule
XIII of the Rules of the House of Representatives, a cost
estimate provided by the Congressional Budget Office pursuant
to section 402 of the Congressional Budget Act of 1974 was not
made available to the Committee in time for the filing of this
report. The Chairman of the Committee shall cause such estimate
to be printed in the Congressional Record upon its receipt by
the Committee.
Committee Estimate of Budgetary Effects
With respect to the requirements of clause 3(d)(1) of rule
XIII of the Rules of the House of Representatives, the
Committee adopts as its own the cost estimate prepared by the
Director of the Congressional Budget Office pursuant to section
402 of the Congressional Budget Act of 1974.
Duplication of Federal Programs
Pursuant to clause 3(c)(5) of House rule XIII, no provision
of H.J. Res. 44 establishes or reauthorizes a program of the
federal government known to be duplicative of another federal
program.
Performance Goals and Objectives
The Committee states that pursuant to clause 3(c)(4) of
House rule XIII, H.J. Res. 44 would nullify a final rule of the
Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF)
titled, ``Factoring Criteria for Firearms with Attached
`Stabilizing Braces,''' and would prevent the ATF from issuing
a substantially similar rule in the future.
Advisory on Earmarks
In accordance with clause 9 of House rule XXI, H.J. Res. 44
does not contain any congressional earmarks, limited tax
benefits, or limited tariff benefits as defined in clauses
9(d), 9(e), or 9(f) of House rule XXI.
Federal Mandates Statement
An estimate of federal mandates prepared by the Director of
the Congressional Budget office pursuant to section 423 of the
Unfunded Mandates Reform Act was not made available to the
Committee in time for the filing of this report. The Chairman
of the Committee shall cause such estimate to be printed in the
Congressional Record upon its receipt by the Committee.
Advisory Committee Statement
No advisory committees within the meaning of section 5(b)
of the Federal Advisory Committee Act were created by this
legislation.
Applicability to Legislative Branch
The Committee finds that the legislation does not relate to
the terms and conditions of employment or access to public
services or accommodations within the meaning of section
102(b)(3) of the Congressional Accountability Act (Pub. L. 104-
1).
Section-by-Section Analysis
Title: Providing for congressional disapproval under
chapter 8 of title 5, United States Code, of the rule submitted
by the Bureau of Alcohol, Tobacco, Firearms, and Explosives
relating to ``Factoring Criteria for Firearms with Attached
`Stabilizing Braces.'''
Resolving Clause: This joint resolution nullifies the ATF's
``Factoring Criteria for Firearms with Attached `Stabilizing
Braces''' and would prevent the ATF from issuing a
substantially similar rule in the future.
Dissenting Views
On March 27, 2023, six people--including three children--
were killed in a mass shooting at a school in Nashville. It was
the 19th school shooting just this year. The Majority had
originally scheduled a markup of this legislation--a bill to
allow continued, unfettered access to stabilizing braces--for
the following day. When it was reported that the shooter in
Nashville used a stabilizing brace--like the mass shooters in
Dayton, Boulder, and Colorado Springs--the Majority postponed
the markup, only to put it back on the calendar a few weeks
later.
It is no coincidence that three recent mass shootings have
involved stabilizing braces. These braces can be attached to a
pistol, allowing it to be fired from the shoulder, transforming
it into a concealable yet deadly short-barreled rifle. In 1934,
Congress passed the National Firearms Act (NFA), creating
additional requirements to own certain especially dangerous
firearms, like short-barreled rifles, which were widely used by
violent criminals. Congress included short-barreled rifles
because they combine the firepower of a rifle with the conceal
ability of a smaller gun. In recent years, the gun industry has
marketed stabilizing braces as a way to circumvent the NFA--a
way to create a short-barreled rifle without having to go
through any of the procedures it requires to prevent especially
dangerous firearms from falling into the wrong hands. Following
the intent of Congress in 1934, and exercising its valid
rulemaking authority, the Bureau of Alcohol, Tobacco, Firearms,
and Explosives (ATF) sought to close this loophole and prevent
circumvention of the NFA by issuing guidance, and later, this
rule to regulate firearms with stabilizing braces.
Under ATF's rule, would-be mass shooters will have a harder
time obtaining a short-barreled rifle since they will no longer
be able to get one by simply attaching a stabilizing brace to a
pistol without satisfying the requirements of the NFA. At the
same time, law-abiding owners of stabilizing braces attached to
firearms with a barrel under 16 inches have many options for
complying with the rule, such as replacing the short barrel
with a longer one, removing the brace, registering the firearm
as set forth by the NFA (and the $200 fee normally required for
NFA weapons is waived if they register by May 31, 2023), or
forfeiting or destroying the firearm.
Though the Majority has repeatedly stated that this
resolution is about protecting individuals with disabilities
who they claim need these braces, the facts are not on their
side. A firearm with a stabilizing brace that is designed,
made, and intended to be fired from the forearm--as the brace
was originally designed, and as might be helpful for certain
people with disabilities--is not subject to the NFA as a result
of the rule. This rule only affects stabilizing braces that are
``designed, made, and intended to be fired from the shoulder''
when they are attached to a firearm with a barrel less than 16
inches because this creates a short-barreled rifle. Thousands
of firearms and accessories on the market are not subject to
the NFA and can be used by people with disabilities. If this
regulation was a real problem for the disabled community, those
organizations would be backing the Majority on this
resolution--but none have endorsed it.
For these reasons and those explained below, I urge my
colleagues to oppose this resolution.
I. BACKGROUND
H.J. Res. 44 is a one-sentence resolution, introduced on
March 17, 2023, by Rep. Andrew S. Clyde (R-GA), along with 188
Republican cosponsors. The resolution provides that Congress
disapproves of the rule submitted by the ATF relating to
``Factoring Criteria for Firearms with Attached `Stabilizing
Braces''' (ATF final rule 2021R-08F), and that such rule shall
have no force or effect.
On January 31, 2023, ATF published final rule 2021R-08F,
``Factoring Criteria for Firearms with Attached `Stabilizing
Braces.''' ATF's stabilizing brace rule is intended to close a
loophole by which people can use a stabilizing brace--which its
inventor claims is primarily meant to be used by people with
disabilities--to convert a pistol into a short-barreled rifle
and evade the stringent restrictions placed on short-barreled
rifles under the NFA. Once again, with this bill, which would
declare the rule to have no force or effect, the Republicans
continue to prioritize guns over public safety. The device that
Republicans want gun owners to continue having nearly
unfettered access to was used in four mass shootings since 2019
alone.
II. CONCERNS
A. This resolution undermines ATF's valid use of its rulemaking
authority
ATF, which has existed in some form since 1886 (initially
as part of the Department of the Treasury), was established as
a separate component within the Department of Justice pursuant
to Title XI of the Homeland Security Act of 2002.\1\ As it
relates to firearms, ATF protects the public from crimes
involving firearms, particularly violent crime and the illegal
use and trafficking of firearms; regulates lawful commerce in
firearms; and provides worldwide support to law enforcement,
public safety, and industry partners. For the purposes of this
resolution, the major functions of ATF are to:
---------------------------------------------------------------------------
\1\Public Law 107-296 (January 17, 2003).
---------------------------------------------------------------------------
Reduce the risk to public safety caused by
illegal firearms trafficking.
Reduce the risk to public safety caused by
criminal possession and use of firearms.
Reduce the risk to public safety caused by
criminal organizations and gangs.
Improve public safety by increasing
compliance with federal laws and regulations by
firearms industry members.
ATF's regulatory strategy is vital to achieving its core
mission of protecting the public from violent crime. The agency
has sole federal regulatory authority over federal firearms
licensees (FFLs) authorized to engage in the business of
manufacturing, importing, or selling firearms in the U.S. It
conducts licensing qualification investigations on those who
seek to engage in the business of firearm manufacturing and
dealing; issues FFLs; and administers and, through the
inspection process, enforces regulations applicable to FFLs,
including recordkeeping requirements for the acquisition and
disposition of each firearm. ATF's inspection of firearms
licensees is focused not only on ensuring regulatory
compliance, but also identifying criminals who illegally
purchase firearms and detecting diversion from lawful commerce
by those who supply guns to criminals through straw purchases.
Historically, the gun industry has attempted to evade
national gun laws through the creation of supplemental and
unregulated devices to augment firing capabilities. Such
devices can turn a regular sporting firearm into one that is as
deadly as a military grade weapon. ATF has issued several
regulations to ban some of these devices (such as bump stocks)
or to subject them to the regulatory requirements of the NFA.
Pursuant to statutory authority granted by Congress, ATF,
like other federal agencies, has the power to issue rules to
implement and clarify statutory terms and requirements within
its jurisdiction--including the interpretation of terms within
the NFA.\2\ Rules, which are regulations created through a
process known as rulemaking, generally explain how an agency
intends to carry out a law. Proposed rules drafted by ATF are
not--contrary to Republican claims--unilateral decisions made
by a lone wolf actor at ATF, with no oversight. Proposed rules
are reviewed by the Office of Information and Regulatory
Affairs (OIRA) of the Office and Management and Budget (OMB),
before a notice of proposed rulemaking is published in the
Federal Register, pursuant to the Administrative Procedure Act
(APA). After a public comment period of at least 30 days, ATF
reviews the comments and the final rule. If the final rule is
approved by OIRA, it is published in the Federal Register and
implemented on its effective date. These agency rules are
executive branch actions that are subject to alteration or
rescission by a future Administration (in compliance with the
APA).
---------------------------------------------------------------------------
\2\See 5 U.S.C. Sec. Sec. 551-559 (the Administrative Procedure
Act).
---------------------------------------------------------------------------
In recent years, ATF has exercised its authority under the
APA to interpret the NFA (and the Gun Control Act of 1968) to
regulate devices, including bump stocks and ghost guns,
designed to evade its regulatory scheme.\3\ Republicans have
consistently opposed ATF's actions and have even called for its
defunding and abolishment. In January 2023, Rep. Matt Gaetz (R-
FL) introduced H.R. 374, the Abolish the ATF Act.
---------------------------------------------------------------------------
\3\See Bump Stock-Type Devices (Final Rule), 83 Fed. Reg. 66,514-
01, https://www.federalregister.gov/documents/2022/04/26/2022-08026/
definition-of-frame-or-receiver-and-identification-of-firearms; see
also Definition of ``Frame or Receiver'' and Identification of
Firearms, 87 Fed. Reg. 24652, https://www.federalregister.gov/
documents/2022/04/26/2022-08026/
definition-of-frame-or-receiver-and-identification-of-firearms. Both of
these rules are subject to ongoing litigation.
---------------------------------------------------------------------------
While the Majority has repeatedly asserted that ATF has
gone beyond its authority in promulgating the stabilizing brace
rule, they have not identified any way in which the ATF failed
to adhere to the APA or exceeded the authority given to it by
Congress.
B. This resolution undermines the intent of Congress to regulate short-
barreled rifles under the National Firearms Act
Short-barreled rifles have been subject to regulation under
the NFA codified at 26 U.S.C. Sec. 5801, et seq., since the NFA
was enacted in 1934. Under the NFA, short-barreled rifles must
be registered and are subject to a $200 tax stamp, an enhanced
background check, and the submission of fingerprints, as they
are considered more dangerous than other firearms.\4\ The NFA
defines a ``rifle'' as ``a weapon designed or redesigned, made
or remade, and intended to be fired from the shoulder and
designed or redesigned and made or remade to use the energy of
the explosive in a fixed cartridge to fire only a single
projectile through a rifled bore for each single pull of the
trigger, and shall include any such weapon which may be readily
restored to fire affixed cartridge.''\5\ A short-barreled rifle
is defined as a rifle with a barrel of less than 16 inches in
length, or a weapon made from a rifle if the weapon has an
overall length of under 26 inches.\6\
---------------------------------------------------------------------------
\4\88 Fed. Reg. 6478, 6482 https://www.federalregister.gov/
documents/2023/01/31/2023-01001/factoring-criteria-for-firearms-with-
attached-stabilizing-braces (``Final Rule'').
\5\18 U.S.C. Sec. 5845(c) (Emphasis added).
\6\18 U.S.C. Sec. 921(a)(8).
---------------------------------------------------------------------------
Short-barreled rifles are effectively portable assault
weapons that are easily concealable and maneuverable. An
individual purchasing a pistol or handgun, however, is not
subject to the NFA's heightened regulations.\7\ An AR-style
pistol is almost identical in design and functionality to an
AR-style short-barreled rifle, but it does not include a stock
to press against the shooter's shoulder. Until recently, ATF
has classified AR-style pistols as handguns because of their
lack of a shoulder stock and their ability to be fired with one
hand, thereby not requiring owners to comply with heightened
ATF regulations.
---------------------------------------------------------------------------
\7\Comment Letter on the Notice of Proposed Rulemaking on Factoring
Criteria for Firearms with Attached ``Stabilizing Braces'' (Docket ID
ATF-2021-0002-0001), Every town for Gun Safety (Sept. 8, 2021), https:/
/www.regulations.gov/comment/ATF-2021-0002-201512.
---------------------------------------------------------------------------
A pistol stabilizing brace (sometimes referred to as an
``arm brace'') is a firearm attachment that is often used to
convert large-format ``pistols,'' including AR-15 and AK-47
pistols, into short-barreled rifles (SBRs). Some stabilizing
braces allow large-format pistols to be stabilized and fired
from the shoulder, like a rifle. Stabilizing braces also can be
used to strap a gun to the user's forearm, allowing a shooter
to fire a weapon one-handed.
Large-format pistols like AR-15 and AK47 pistols, which
fire rifle-caliber ammunition, are more powerful and lethal
than traditional handguns or pistols, and with a stabilizing
brace attached as a shoulder stock, they are more accurate and
easier to use. They are also easier to maneuver in tight spaces
(such as in the Club Q mass shooting in Colorado Springs), and
they are more concealable than full-length rifles, making them
more dangerous and deadly outside a sport shooting application.
Although Republicans claim that stabilizing braces do not
make pistols more dangerous because they do not increase the
capacity of a pistol's magazine, or the velocity with which a
bullet travels through the barrel, it is beyond dispute that
stabilizing braces increase the shooting accuracy of the large-
format pistols with which they are used, as they make it easier
for the shooter to control the now-stabilized weapon. This
means that when fired from the shoulder, pistols with
stabilizing braces combine the high-caliber firepower of a
rifle with the concealability and maneuverability of a pistol--
a particularly lethal combination in criminal hands.
Approximately 3-7 million stabilizing braces are currently in
circulation in the United States.\8\
---------------------------------------------------------------------------
\8\Id.
---------------------------------------------------------------------------
Large-format pistols equipped with stabilizing braces have
been used in a recent series of high-profile mass shootings. In
Dayton, Ohio in 2019, a shooter used an Anderson Manufacturing
AR-15 pistol equipped with a Shockwave Technologies stabilizing
brace to kill nine people and injure 17 others. In 2021 in
Boulder, Colorado, a shooter used a Ruger 556 pistol with an SB
Tactical SBA3 stabilizing brace to kill 10 people, including a
police officer, in a King Soopers market. An SB Tactical
stabilizing brace was also used by the shooter who killed 5
people and injured 19 others at Club Q in Colorado Springs in
November 2022. On March 27, 2023--on the day before the
Committee initially planned to mark up this resolution--a
shooter used an AR-style pistol equipped with a stabilizing
brace in the shooting that killed 3 children and 3 adults in a
school in Nashville, Tennessee. At the eleventh hour, the
Majority decided to postpone the markup in the wake of the
Nashville shooting.
On January 31, 2023, ATF published final rule 2021R-08F,
``Factoring Criteria for Firearms with Attached `Stabilizing
Braces,''' clarifying that the phrase ``designed, redesigned,
made or remade, and intended to be fired from the shoulder''
under the NFA includes a weapon that is equipped with an
accessory, component, or other rearward attachment (e.g., a
``stabilizing brace'') that provides surface area that allows
the weapon to be fired from the shoulder, provided that other
factors, as listed in the definition, indicated that the weapon
is designed, made, and intended to be fired from the
shoulder.\9\ The rule sets forth six ``other factors'' which
indicate that a weapon is designed, made, or intended to be
fired from the shoulder, including whether the weapon is
equipped with sights or an eye scope that require the weapon to
be fired from the shoulder in order to be used as designed.\10\
A manufacturer's direct and indirect marketing and promotional
materials indicating the intended use of the weapon, as well as
information demonstrating the likely use of the weapon in the
general community, are also considered.\11\
---------------------------------------------------------------------------
\9\Final Rule, supra.
\10\Id.
\11\Id.
---------------------------------------------------------------------------
This rule went into effect on January 31, 2023, the date it
was published in the Federal Register. Any weapons with
stabilizing braces or similar attachments that meet the
definition of a ``rifle'' under the NFA must be registered no
later than May 31, 2023. The rule provides five options for
compliance for owners of brace-equipped firearms that would
fall within the purview of the rule: (1) remove the short
barrel (under 16 inches in length) from the firearm and replace
it with a barrel that is 16 inches or longer; (2) register the
firearm with ATF (like any other short-barreled rifle);\12\ (3)
remove the stabilizing brace from the firearm so that it cannot
be reattached; (4) turn in the brace-equipped firearm to the
ATF; or (5) destroy the firearm. Moreover, a brace that is not
designed, made, or intended to be fired from the shoulder is
not a ``rifle'' as defined in the NFA and therefore is not
subject to NFA controls.\13\
---------------------------------------------------------------------------
\12\The Rule provides a 120-day amnesty period waiving the usual
$200 tax stamp required for registration.
\13\Final Rule at 6480.
---------------------------------------------------------------------------
C. In pursuing this resolution, the Majority has inaccurately portrayed
ATF's prior actions relating to stabilizing braces, the gun
industry's misrepresentation of the ATF's rulings in pursuit of
profits from these devices, and Republican efforts to
intimidate the Trump ATF when it issued guidance on stabilizing
braces
The first stabilizing brace was submitted to ATF for
evaluation by SB Tactical in 2012. The brace was developed by
Alex Bosco, the inventor of the brace and founder of SB
Tactical, who claims that he developed the brace after he
witnessed a range officer tell a disabled veteran that he was
not carefully firing his weapon.\14\ ATF concluded that the
initial model was not subject to NFA controls as a rifle,
finding that, based on the information Bosco provided, the
particular brace ``provided the shooter with additional support
of a firearm while it is still held and operated with one
hand,'' and that ``it was not designed or intended to fire a
weapon from the shoulder''.\15\ The original brace design that
SB Tactical submitted to ATF never made it to the market.
However, over the next several years, SB Tactical manufactured
additional, different models of stabilizing braces, and other
companies began manufacturing the braces as well.
---------------------------------------------------------------------------
\14\Statement of Alex Bosco before the Committee on Oversight and
Accountabilit