Minority Views
[To accompany H.R. 3074]
The Committee on Financial Services, to whom was referred
the bill (H.R. 3074) to direct the Secretary of the Treasury to
stop minting the penny, to require cash transactions to be
rounded up or down to the nearest five cents, and for other
purposes, having considered the same, reports favorably thereon
with an amendment and recommends that the bill as amended do
pass.
CONTENTS
Page
Purpose and Summary.............................................. 2
Background and Need for Legislation.............................. 3
Committee Consideration.......................................... 4
Related Hearings................................................. 4
Committee Votes.................................................. 5
Committee Oversight Findings..................................... 8
Performance Goals and Objectives................................. 8
Committee Cost Estimate.......................................... 8
New Budget Authority and CBO Cost Estimate....................... 8
Unfunded Mandates Statement...................................... 8
Earmark Statement................................................ 8
Federal Advisory Committee Act Statement......................... 9
Applicability to the Legislative Branch.......................... 9
Duplication of Federal Programs.................................. 9
Section-by-Section Analysis of the Legislation................... 9
Changes in Existing Law Made by the Bill, as Reported............ 9
Documents Included by Unanimous Consent.......................... 40
Minority Views................................................... 42
The amendment is as follows:
Strike all after the enacting clause and insert the
following:
SECTION 1. SHORT TITLE.
This Act may be cited as the ``Common Cents Act''.
SEC. 2. SPECIFICATIONS OF 5-CENT COINS AND ELIMINATION OF ONE-CENT
COINS.
Section 5112 of title 31, United States Code, is amended--
(1) in subsection (a)--
(A) in paragraph (5), by striking ``weighs 5 grams.''
and inserting the following: ``weighs--
``(A) 5 grams, with respect to such coin that is an
alloy of copper and nickel; or
``(B) between 4 and 6 grams, with respect to such
coin as described in subsection (c).''; and
(B) in paragraph (6)--
(i) by striking ``except as provided under
subsection (c) of this section,''; and
(ii) by striking ``and weighs 3.11 grams'';
(2) in subsection (b)--
(A) in the sixth sentence--
(i) by inserting ``either'' before ``an
alloy''; and
(ii) by inserting ``or a composition
described in subsection (c)'' before the
period;
(B) by inserting ``with respect to such coins that
are an alloy of copper and nickel'' after ``nickel
required''; and
(C) by striking ``Except'' through ``zinc'' and
inserting ``The one-cent coin is composed of copper and
zinc'';
(3) by amending subsection (c) to read as follows:
``(c) 5-cent Coin.--
``(1) In general.--The 5-cent coin may be a coin with an
inner layer of zinc and an outer layer of nickel.
``(2) Composition.--The Secretary may prescribe the
composition of zinc and nickel in the 5-cent coin, subject to
testing and evaluation that such composition reduces the cost
incurred to produce such coin.''; and
(4) by adding at the end the following:
``(bb) Elimination of One-cent Coin.--
``(1) In general.--Notwithstanding any other provision of
law, the Secretary shall cease production of one-cent coins for
general circulation, but may continue to produce and issue one-
cent coins for sale as numismatic items.
``(2) No effect on legal tender.--Any one-cent coin that is
minted and issued on any date before the date of the enactment
of this subsection shall remain legal tender for all debts,
public charges, taxes, and dues.''.
Purpose and Summary
H.R. 3074, the Common Cents Act, was introduced on April
29, 2025 by Republican Representative Lisa McClain (MI-09).
H.R. 3074 directs the Secretary of the Treasury to cease
production of pennies within one year of enactment but not
affect the continued status of the penny as legal tender. The
bill provides for an exception for numismatic pennies, which
the U.S. Mint would still be permitted to produce, so long as
the net receipts from the sale of these numismatic pennies are
sufficient to cover the total cost of their production.
Additionally, H.R. 3074 authorizes an alternative
composition for producing nickels, consisting of a zinc inner
layer with a nickel outer layer, with the Secretary of the
Treasury determining the specific zinc-nickel makeup. This new
composition would be subject to testing and evaluation to
confirm that it lowers production costs. The bill preserves the
U.S. Mint's ability to continue producing nickels using the
current alloy of 75 percent copper and 25 percent nickel.
Background and Need for Legislation
Article I, Section 8, Clause 5 of the U.S. Constitution
gives Congress the sole authority to coin money, determine its
value, and establish standard weights and measures.\1\ Congress
established the U.S. Mint in the Coinage Act of 1792.\2\
---------------------------------------------------------------------------
\1\U.S. CONST. art. I, Sec. 8, cl. 5.
\2\Coinage Act of April 2, 1792, https://www.usmint.gov/learn/
history/historical-
documents/coinage-act-of-april-2-1792?srsltid=AfmBOoqhi6CErmZrPfkfTbYI_
rz3yrZGOxOs29nAIAzLEhVSEG8yRe4V (last visited July 8, 2025).
---------------------------------------------------------------------------
On May 22, 2025, the Treasury Department announced it would
begin efforts to suspend production of the penny, following a
directive issued by President Trump in February 2025. The U.S.
Mint received its final supply of penny blanks in June 2025 and
expects to cease issuing new pennies into circulation by the
end of 2025.
Legislative efforts to eliminate the penny from circulation
in the U.S. date back to the 1980s and have involved
initiatives from both Democrats and Republicans over the past
four decades. These efforts have been driven by the penny's
increasing production costs and diminishing purchasing power.
According to the US Mint's FY 2024 audit, the unit cost for
pennies was 3.69 cents, marking the 19th consecutive fiscal
year the unit cost has remained above the face value. The US
Mint lost approximately $85.3 million in the 2024 fiscal year
from penny production. In 2013, then-President Obama also
explored ending the penny given the costs of production.
H.R. 3074 provides for an exception for the production of
numismatic pennies given their important cultural, economic,
and educational benefits. Commemorative and collectible coins
celebrate American history, milestones, and notable figures,
while also allowing coin enthusiasts to expand their
collections and sustain a robust domestic collectibles market.
The U.S. Mint generates profits from numismatic coin
production--$42 million in 2024--which supports its operations
and are deposited into the Treasury's general fund through
budget transfers.\3\
---------------------------------------------------------------------------
\3\THE U.S. MINT, 2024 ANNUAL REPORT (2024).
---------------------------------------------------------------------------
In 2013, then-President Obama considered legislative
efforts to eliminate the penny due to its high production
costs. When asked why the Treasury continues to mint pennies
even though the cost to mint exceeds their value, he said,
``any time we're spending money on something people aren't
going to use, that's something that should change.''\4\
---------------------------------------------------------------------------
\4\Jonathan Easley, Obama Favors Sacking the Expensive Penny, THE
HILL, Feb. 14, 2013, https://thehill.com/blogs/blog-briefing-room/news/
142333-obama-favors-sacking-the-expensive-penny/.
---------------------------------------------------------------------------
Canada, Australia, New Zealand, and Sweden have all
eliminated their pennies in recent decades to reduce costs and
improve efficiency in their economies. Canada stopped
distributing pennies in 2012 due to the coin's production costs
exceeding its face value.\5\ Australia and New Zealand forged
similar paths in the early 1990s, withdrawing one- and two-cent
coins to streamline currency and cut expenses.\6\ Sweden
eliminated its smallest coins in 1972 to encourage electronic
payments and simplify cash handling.\7\ In all these countries,
the removal of low-value coins has led to minimal public
disruption and cost savings for governments. In all these
countries, the removal of low-value coins has led to minimal
public disruption, cost savings for governments, and a gradual
shift toward digital transactions.
---------------------------------------------------------------------------
\5\Martha C. White et al., Trump's Coin Toss: What's Going to
Happen When the U.S. Scraps Pennies?, NASDAQ (May 22, 2025), https://
www.nasdaq.com/articles/trumps-coin-toss-whats-going-happen-when-us-
scraps-pennies.
\6\Id.
\7\Id.
---------------------------------------------------------------------------
However, eliminating the penny may increase demand for the
nickel, which the U.S. Mint also produces at a per-unit loss.
The FY 2024 unit cost for nickels was $13.78 cents and the US
Mint lost approximately $18 million from nickel production.
Currently, Section 5112 of title 31, U.S.C. mandates that the
5-cent coin is an alloy of 75 percent copper and 25 percent
nickel. As of July 16, the spot price per metric ton for nickel
was $14,836;\8\ the spot price per metric ton for zinc was
$2,699;\9\ and the spot price per metric ton for copper was
$9,563.\10\ To reduce costs in nickel production, efforts have
been made to develop a zinc-based nickel alloy with testing by
the Mint and private sector indicating that this new
composition would work with existing coin machinery. While H.R.
3074 does not require the Treasury Secretary to change the
nickel's composition, it allows for the production and
circulation of an alternative zinc-based nickel which will
likely have lower production costs due to the lower cost of
zinc.
---------------------------------------------------------------------------
\8\Nickel Price, BUSINESS INSIDER, July 16, 2025, https://
markets.businessinsider.com/
commodities/nickel-price.
\9\Zinc Price, BUSINESS INSIDER, July 16, 2025, https://
markets.businessinsider.com/
commodities/zinc-price.
\10\Copper Price, BUSINESS INSIDER, July 16, 2025, https://
markets.businessinsider.com/
commodities/copper-price.
---------------------------------------------------------------------------
Committee Consideration
119TH CONGRESS
H.R. 3074, the Common Cents Act, was introduced on April
29, 2025 by Representative McClain, with Representative Robert
Garcia (D-CA) as an original cosponsor. The bill was referred
solely to the Committee on Financial Services.
This bill was attached to the June 12, 2025, hearing titled
``Evaluating the Defense Production Act.''
On July 23, 2025, the Committee on Financial Services met
in open session to consider, among others, H.R. 3074. The
Committee ordered H.R. 3074, as amended, to be favorably
reported to the House of Representatives.
Related Hearings
Pursuant to clause 3(c)(6) of rule XIII of the Rules of the
House of Representatives, the following hearing was used to
develop H.R. 3074:
The Subcommittee on National Security, Illicit Finance, &
International Financial Institutions of the Committee on
Financial Services held a hearing on June 12, 2025 titled
``Evaluating the Defense Production Act''. The following
witnesses testified at the February 26, 2025, hearing: Mr.
William Russell, Director, Contracting and National Security
Acquisitions, Government Accountability Office, and Mr. Adam G.
Levin, Analyst in Economic Development Policy, Congressional
Research Service (CRS).
Committee Votes
Clause 3(b) of rule XIII of the Rules of the House of
Representatives requires the Committee Report to include record
votes on the motion to report legislation and amendments
thereto.
On July 23, 2025, the Committee ordered H.R. 3074, as
amended, to be reported favorably to the House by a recorded
vote of 35 yeas and 13 nays. (Record Vote No. FC-187).
The Committee considered the following amendments to H.R.
3074:
Representative McClain offered an amendment
in the nature of a substitute, designated as
McLain_025, which ceases production of one-cent coins
for general circulation, authorizes the production of
an alternative zinc-based nickel, preserves the
production of numismatic one-cent coins, and maintains
the status of one-cent coins as legal tender. This
amendment was adopted by a voice vote.
Representative Maxine Waters (D-CA) offered
an amendment (No. 11), designated as HR3074_02. This
amendment would require the Secretary of the Treasury
to establish a task force to study the impact of
ceasing penny production and to submit a report to
determine whether such policy is in the public's best
interest. This amendment failed by a recorded vote of
22 yeas and 25 nays, a quorum being present. (Record
Vote No. FC-186).
Committee Oversight Findings
Pursuant to clause 3(c) of rule XIII of the Rules of the
House of Representatives, the findings and recommendations of
the Committee, based on oversight activities under clause
2(b)(1) of rule X of the Rules of the House of Representatives
are incorporated in the descriptive portions of this report.
Performance Goals and Objectives
Pursuant to clause 3(c)(4) of rule XIII of the Rules of the
House of Representatives, the goal of H.R. 3074 is to direct
the Secretary of the Treasury to cease production of pennies,
and to allow for the production and circulation of an
alternative zinc-based nickel due to the lower cost of zinc.
Committee Cost Estimate
Clause 3(d)(1) of rule XIII of the Rules of the House of
Representatives requires an estimate and a comparison of the
costs that would be incurred in carrying out H.R. 3074. The
Committee has requested but not received a cost estimate from
the Director of the Congressional Budget Office. However,
pursuant to clause 3(d)(1) of rule XIII of the Rules of the
House of Representatives, the Committee will adopt as its own
the cost estimate by the Director of the Congressional Budget
Office once it has been prepared.
New Budget Authority and CBO Cost Estimate
With respect to the requirements of clause 3(c)(2) of rule
XIII of the Rules of the House of Representatives and section
308(a) of the Congressional Budget Act of 1974 and with respect
to requirements of clause 3(c)(3) of rule XIII of the Rules of
the House of Representatives and section 402 of the
Congressional Budget Act of 1974, the Committee will adopt as
its own the cost estimate for the bill prepared by the Director
of the Congressional Budget Office. However, a cost estimate
was not made available to the Committee in time for the filing
of this report. The Chairman of the Committee shall cause such
estimate to be printed in the Congressional Record upon its
receipt by the Committee.
Unfunded Mandates Statement
The Committee has requested but not received from the
Director of the Congressional Budget Office an estimate of the
Federal mandates pursuant to section 423 of the Unfunded
Mandates Reform Act. The Chairman of the Committee shall cause
such estimate to be printed in the Congressional Record upon
its receipt by the Committee.
Earmark Statement
In compliance with clause 9 of rule XXI of the Rules of the
House of Representatives, this bill, as reported, contains no
congressional earmarks, limited tax benefits, or limited tariff
benefits as defined in clause 9(e), 9(f), or 9(g) of rule XXI.
Federal Advisory Committee Act Statement
No advisory committees within the meaning of section 5(b)
of the Federal Advisory Committee Act were created by this
legislation.
Applicability to the Legislative Branch
The Committee finds that the legislation does not relate to
the terms and conditions of employment or access to public
services or accommodations within the meaning of section
102(b)(3) of the Congressional Accountability Act.
Duplication of Federal Programs
Pursuant to clause 3(c)(5) of rule XIII of the Rules of the
House of Representatives, the Committee states that no
provision of the bill establishes or reauthorizes a program of
the Federal Government known to be duplicative of another
Federal program, including any program that was included in a
report to Congress pursuant to section 21 of the Public Law
111-139 or the most recent Catalog of Federal Domestic
Assistance.
Section-by-Section Analysis of the Legislation
Section 1. Short title
Section 1 provides the short title as the ``Common Cents
Act''.
Section 2. Specifications of 5-cent coins and elimination of one-cent
coins
Section 2 authorizes an alternative composition for
producing nickels, consisting of a zinc core with a nickel
outer layer, with the Secretary of the Treasury determining the
specific zinc-nickel makeup. Additionally, Section 2 codifies
the cessation of the production of pennies but does not affect
the continued status of the penny as legal tender.
Changes in Existing Law Made by the Bill, as Reported
In compliance with clause 3(e) of rule XIII of the Rules of
the House of Representatives, changes in existing law made by
the bill, as reported, are shown as follows (existing law
proposed to be omitted is enclosed in black brackets, new
matter is printed in italics, and existing law in which no
change is proposed is shown in roman):
TITLE 31, UNITED STATES CODE
* * * * * * *
SUBTITLE IV--MONEY
* * * * * * *
CHAPTER 51--COINS AND CURRENCY
* * * * * * *
SUBCHAPTER II--GENERAL AUTHORITY
* * * * * * *
Sec. 5112. Denominations, specifications, and design of coins
(a) The Secretary of the Treasury may mint and issue only the
following coins:
(1) a dollar coin that is 1.043 inches in diameter.
(2) a half dollar coin that is 1.205 inches in
diameter and weighs 11.34 grams.
(3) a quarter dollar coin that is 0.955 inch in
diameter and weighs 5.67 grams.
(4) a dime coin that is 0.705 inch in diameter and
weighs 2.268 grams.
(5) a 5-cent coin that is 0.835 inch in diameter and
[weighs 5 grams.] weighs--
(A) 5 grams, with respect to such coin that
is an alloy of copper and nickel; or
(B) between 4 and 6 grams, with respect to
such coin as described in subsection (c).
(6) [except as provided under subsection (c) of this
section,] a one-cent coin that is 0.75 inch in diameter
[and weighs 3.11 grams].
(7) A fifty dollar gold coin that is 32.7 millimeters
in diameter, weighs 33.931 grams, and contains one troy
ounce of fine gold.
(8) A twenty-five dollar gold coin that is 27.0
millimeters in diameter, weighs 16.966 grams, and
contains one-half troy ounce of fine gold.
(9) A ten dollar gold coin that is 22.0 millimeters
in diameter, weighs 8.483 grams, and contains one-
fourth troy ounce of fine gold.
(10) A five dollar gold coin that is 16.5 millimeters
in diameter, weighs 3.393 grams, and contains one-tenth
troy ounce of fine gold.
(11) A $50 gold coin that is of an appropriate size
and thickness, as determined by the Secretary, weighs 1
ounce, and contains 99.99 percent pure gold.
(12) A $25 coin of an appropriate size and thickness,
as determined by the Secretary, that weighs 1 troy
ounce and contains .9995 fine palladium.
(b) The half dollar, quarter dollar, and dime coins are clad
coins with 3 layers of metal. The 2 identical outer layers are
an alloy of 75 percent copper and 25 percent nickel. The inner
layer is copper. The outer layers are metallurgically bonded to
the inner layer and weigh at least 30 percent of the weight of
the coin. The dollar coin shall be golden in color, have a
distinctive edge, have tactile and visual features that make
the denomination of the coin readily discernible, be minted and
fabricated in the United States, and have similar metallic,
anti-counterfeiting properties as United States coinage in
circulation on the date of enactment of the United States $1
Coin Act of 1997. The 5-cent coin is either an alloy of 75
percent copper and 25 percent nickel or a composition described
in subsection (c). In minting 5-cent coins, the Secretary shall
use bars that vary not more than 2.5 percent from the percent
of nickel required with respect to such coins that are an alloy
of copper and nickel. [Except as provided under subsection (c)
of this section, the one-cent coin is an alloy of 95 percent
copper and 5 percent zinc] The one-cent coin is composed of
copper and zinc. In minting gold coins, the Secretary shall use
alloys that vary not more than 0.1 percent from the percent of
gold required. The specifications for alloys are by weight.
[(c) The Secretary may prescribe the weight and the
composition of copper and zinc in the alloy of the one-cent
coin that the Secretary decides are appropriate when the
Secretary decides that a different weight and alloy of copper
and zinc are necessary to ensure an adequate supply of one-cent
coins to meet the needs of the United States.]
(c) 5-cent Coin.--
(1) In general.--The 5-cent coin may be a coin with
an inner layer of zinc and an outer layer of nickel.
(2) Composition.--The Secretary may prescribe the
composition of zinc and nickel in the 5-cent coin,
subject to testing and evaluation that such composition
reduces the cost incurred to produce such coin.
(d)(1) United States coins shall have the inscription ``In
God We Trust''. The obverse side of each coin shall have the
inscription ``Liberty''. The reverse side of each coin shall
have the inscriptions ``United States of America'' and ``E
Pluribus Unum'' and a designation of the value of the coin. The
design on the reverse side of the dollar, half dollar, and
quarter dollar is an eagle. Subject to other provisions of this
subsection, the obverse of any 5-cent coin issued after
December 31, 2005, shall bear the likeness of Thomas Jefferson
and the reverse of any such 5-cent coin shall bear an image of
the home of Thomas Jefferson at Monticello. The Secretary of
the Treasury, in consultation with the Congress, shall select
appropriate designs for the obverse and reverse sides of the
dollar coin. The coins have an inscription of the year of
minting or issuance. However, to prevent or alleviate a
shortage of a denomination, the Secretary may inscribe coins of
the denomination with the year that was last inscribed on coins
of the denomination.
(2) The Secretary shall prepare the devices, models, hubs,
and dies for coins, emblems, devices, inscriptions, and designs
authorized under this chapter. The Secretary may, after
consulting with the Citizens Coinage Advisory Committee and the
Commission of Fine Arts, adopt and prepare new designs or
models of emblems or devices that are authorized in the same
way as when new coins or devices are authorized. The Secretary
may change the design or die of a coin only once within 25
years of the first adoption of the design, model, hub, or die
for that coin. The Secretary may procure services under section
3109 of title 5 in carrying out this paragraph.
(e) Notwithstanding any other provision of law, the Secretary
shall mint and issue, in qualities and quantities that the
Secretary determines are sufficient to meet public demand,
coins which--
(1) are 40.6 millimeters in diameter and weigh 31.103
grams;
(2) contain .999 fine silver;
(3) have a design--
(A) symbolic of Liberty on the obverse side;
and
(B) of an eagle on the reverse side;
(4) have inscriptions of the year of minting or
issuance, and the words ``Liberty'', ``In God We
Trust'', ``United States of America'', ``1 Oz. Fine
Silver'', ``E Pluribus Unum'', and ``One Dollar''; and
(5) have reeded edges.
(f) Silver Coins.--
(1) Sale price.--The Secretary shall sell the coins
minted under subsection (e) to the public at a price
equal to the market value of the bullion at the time of
sale, plus the cost of minting, marketing, and
distributing such coins (including labor, materials,
dies, use of machinery, and promotional and overhead
expenses).
(2) Bulk sales.--The Secretary shall make bulk sales
of the coins minted under subsection (e) at a
reasonable discount.
(3) Numismatic items.--For purposes of section
5132(a)(1) of this title, all coins minted under
subsection (e) shall be considered to be numismatic
items.
(g) For purposes of section 5132(a)(1) of this title, all
coins minted under subsection (e) of this section shall be
considered to be numismatic items.
(h) The coins issued under this title shall be legal tender
as provided in section 5103 of this title.
(i)(1) Notwithstanding section 5111(a)(1) of this title, the
Secretary shall mint and issue the gold coins described in
paragraphs (7), (8), (9), and (10) of subsection (a) of this
section, in qualities and quantities that the Secretary
determines are sufficient to meet public demand, and such gold
coins shall--
(A) have a design determined by the Secretary, except
that the fifty dollar gold coin shall have--
(i) on the obverse side, a design symbolic of
Liberty; and
(ii) on the reverse side, a design
representing a family of eagles, with the male
carrying an olive branch and flying above a
nest containing a female eagle and hatchlings;
(B) have inscriptions of the denomination, the weight
of the fine gold content, the year of minting or
issuance, and the words ``Liberty'', ``In God We
Trust'', ``United States of America'', and ``E Pluribus
Unum''; and
(C) have reeded edges.
(2)(A) The Secretary shall sell the coins minted under this
subsection to the public at a price equal to the market value
of the bullion at the time of sale, plus the cost of minting,
marketing, and distributing such coins (including labor,
materials, dies, use of machinery, and promotional and overhead
expenses).
(B) The Secretary shall make bulk sales of the coins minted
under this subsection at a reasonable discount.
(3) For purposes of section 5132(a)(1) of this title, all
coins minted under this subsection shall be considered to be
numismatic items.
(4)(A) Notwithstanding any other provision of law and subject
to subparagraph (B), the Secretary of the Treasury may change
the diameter, weight, or design of any coin minted under this
subsection or the fineness of the gold in the alloy of any such
coin if the Secretary determines that the specific diameter,
weight, design, or fineness of gold which differs from that
otherwise required by law is appropriate for such coin.
(B) The Secretary may not mint any coin with respect to which
a determination has been made by the Secretary under
subparagraph (A) before the end of the 30-day period beginning
on the date a notice of such determination is published in the
Federal Register.
(C) The Secretary may continue to mint and issue coins in
accordance with the specifications contained in paragraphs (7),
(8), (9), and (10) of subsection (a) and paragraph (1)(A) of
this subsection at the same time the Secretary in minting and
issuing other bullion and proof gold coins under this
subsection in accordance with such program procedures and coin
specifications, designs, varieties, quantities, denominations,
and inscriptions as the Secretary, in the Secretary's
discretion, may prescribe from time to time.
(j) General Waiver of Procurement Regulations.--
(1) In general.--Except as provided in paragraph (2),
no provision of law governing procurement or public
contracts shall be applicable to the procurement of
goods or services necessary for minting, marketing, or
issuing any coin authorized under paragraph (7), (8),
(9), or (10) of subsection (a) or subsection (e),
including any proof version of any such coin.
(2) Equal employment opportunity.--Paragraph (1)
shall not relieve any person entering into a contract
with respect to any coin referred to in such paragraph
from complying with any law relating to equal
employment opportunity.
(k) The Secretary may mint and issue platinum bullion coins
and proof platinum coins in accordance with such
specifications, designs, varieties, quantities, denominations,
and inscriptions as the Secretary, in the Secretary's
discretion, may prescribe from time to time.
(l) Redesign and Issuance of Quarter Dollar in Commemoration
of Each of the 50 States.--
(1) Redesign beginning in 1999.--
(A) In general.--Notwithstanding the fourth
sentence of subsection (d)(1) and subsection
(d)(2), quarter dollar coins issued during the
10-year period beginning in 1999, shall have
designs on the reverse side selected in
accordance with this subsection which are
emblematic of the 50 States.
(B) Transition provision.--Notwithstanding
subparagraph (A), the Secretary may continue to
mint and issue quarter dollars in 1999 which
bear the design in effect before the redesign
required under this subsection and an
inscription of the year ``1998'' as required to
ensure a smooth transition into the 10-year
program under this subsection.
(C) Flexibility with regard to placement of
inscriptions.--Notwithstanding subsection
(d)(1), the Secretary may select a design for
quarter dollars issued during the 10-year
period referred to in subparagraph (A) in
which--
(i) the inscription described in the
second sentence of subsection (d)(1)
appears on the reverse side of any such
quarter dollars; and
(ii) any inscription described in the
third sentence of subsect
Minority Views
H.R. 3074 is a bill that ends the production of new pennies
but does not provide sufficient guidance or consideration of
how small businesses, local communities, and other stakeholders
would execute this transition. On February 9, 2025, on a Truth
Social post, President Trump announced that he directed
Treasury Secretary Scott Bessent to stop producing new
pennies.\1\ This represented another unilateral policy
declaration made outside of the President's authority, as
Article I, Section 8 of the Constitution declares that
``Congress shall have power . . . to coin money [and] regulate
the value thereof.''\2\ The Supreme Court has also recognized
Congress's coinage power to be exclusive.\3\ However, in
following Trump's directive, and without a law from Congress,
on May 22, 2025, Treasury announced it made its last order of
penny blanks, which are the flat metal discs the U.S. Mint
turns into coins.\4\ The Mint plans to continue to manufacture
pennies while the inventory of penny blanks exists.\5\ The Mint
is expected to stop producing pennies for circulation by early
2026.\6\
---------------------------------------------------------------------------
\1\X, Department of Government Efficiency Post (Jan. 21, 2025);
Truth Social, Donald J. Trump (Feb. 9, 2025).
\2\ArtI.S8.C5.1, Congress's Coinage Power.
\3\Houston v. Moore, 18 U.S. 1, 49 (1820); Sturges v.
Crowninshield, 17 U.S. 122, 125 (1819).
\4\The U.S. will soon mint its last penny, NBC News (May 22, 2025).
\5\The U.S. will soon mint its last penny, NBC News (May 22, 2025).
\6\Rounding Up: The Impact of Phasing Out the Penny, Federal
Reserve Bank of Richmond (July 2025).
---------------------------------------------------------------------------
Although H.R. 3074 directs the Treasury to stop the
production of pennies, pennies can still be produced and sold
as numismatic items for coin collecting and existing pennies
will still be considered legal tender. Under this legislation,
the Treasury may also determine the composition of zinc and
nickel in the 5-cent coin, subject to testing and evaluation
that such composition reduces the cost to produce the 5-cent
coin.
Ending the production of pennies raises new challenges as
the demand of 5-cent coins would increase. Five-cent coins are
more expensive to produce due to their manufacturing costs,
metal composition, and inflation and supply chain issues.\7\
Each penny costs 3.7 cents to make: 3 cents for production
costs and 0.7 cents per coin for administrative and
distribution costs.\8\ Each 5-cent coin costs 13.8 cents: 11
cents for production costs and 2.8 cents for administrative and
distribution costs.\9\ The cost of producing 5-cent coins has
risen by about 20% since 2022 due to the costs of copper and
nickel.\10\ Five-cent coins are made of 75% copper and 25%
nickel.\11\ While pennies are made of copper-plated zinc, they
are only 2.5% copper and 97.5% zinc.\12\ Zinc prices have
stayed relatively steady since 2016, but copper and nickel
prices have roughly doubled since then.\13\ Of note, on July 8,
Trump announced a 50% tariff on copper imports starting on
August 1.\14\ This move sent prices for copper surging 13% in
one day up to a record high of $5.69 per pound.\15\ It is not
clear that the proposed composition for the nickel is the most
cost effective metal composition.
---------------------------------------------------------------------------
\7\The Future of the US Nickel: Will It Be Next to Go?, Bullion
Exchanges (Feb. 20, 2025).
\8\U.S. Mint, 2024 Annual Report (2024).
\9\U.S. Mint, 2024 Annual Report (2024).
\10\U.S. Mint, 2024 Annual Report (2024).
\11\Joshua McMorrow-Hernandez, What Are Nickels Made Of?,
Gainseville Coins (Nov. 03, 2023).
\12\Maria Francis, Trump orders Treasury to stop minting pennies:
How much does it cost to mint a penny?, USA Today (Feb. 10, 2025).
\13\Chris Isidore, Getting rid of the penny introduces a new
problem: nickels, CNN (Feb. 10, 2025).
\14\Trump says 50% tariff on copper imports is coming and threatens
200% on pharmaceuticals, CNN (July 8, 2025).
\15\Copper prices have surged to record highs--and they could jump
higher. Here's why, CNN (July 17, 2025).
---------------------------------------------------------------------------
Furthermore, adopting a new composition for the 5-cent coin
without implementation standards and timelines for vendors to
adjust their equipment, such as vending machines, and other
operations will burden entrepreneurs and small businesses who
depend on cash transactions. Vending machines rely on
electromagnetic and weight sensors calibrated to current coin
specifications. An abrupt change in the 5-cent coin composition
would render many mechanisms inoperable, requiring operators to
update or replace equipment at a significant expense. These
sudden shifts would also impact a range of stakeholders. For
example, under the Randolph-Sheppard program, individuals who
are blind or have vision impairment are recruited to manage
vending facilities and would also be required to grapple with
the implications of this legislation.\16\ In addition, other
small businesses that rely heavily on cash, such as laundromats
and corner stores, might also be particularly affected.\17\
---------------------------------------------------------------------------
\16\National Council of State Agencies for the Blind, About
Randolph-Sheppard (accessed Aug. 29, 2025).
\17\Tim Sablik, Insert Coins: The COVID-19 pandemic disrupted the
supply of many items, including cold hard cash, Fourth Quarter 2020
(2020).
---------------------------------------------------------------------------
H.R. 3074 does not clearly describe the types of standards
states and different localities should adopt regarding the
rounding of cash transactions. A lack of uniform guidance,
especially for multi-state operations, may cause
inconsistencies, uncertainty in pricing approaches, legal
compliance issues, and sales tax calculations.\18\ Without this
guidance, consumers who use cash to pay may face a ``rounding''
tax, as businesses may round transactions to the disadvantage
of consumers,\19\ which would likely disproportionately affect
older Americans and low-income individuals.\20\ On the other
hand, consumers using electronic payments like credit and debit
transactions would remain unaffected and have their
transactions executed in exact amounts.\21\
---------------------------------------------------------------------------
\18\Phasing out the penny: Preparing for a currency shift without
clear rules, pwc (June 23, 2025).
\19\Yan Zhuang and Erica L. Green, Trump Orders Treasury Secretary
to Sop Minting Pennies, The New York Times (Feb. 9, 2025).
\20\Why the end of pennies could trigger a small ``rounding tax,
AXIOS (July 9, 2025); What the end of the penny means for the economy,
your piggy bank, and the way America prices items, CNBC (Feb. 10,
2025); and Tim Sablik, Will the Penny Get Pitched?, Federal Reserve
Bank of Richmond, Fourth Quarter 2020 (2020).
\21\Rounding Up: The Impact of Phasing Out the Penny, Federal
Reserve Bank of Richmond (July 2025).
---------------------------------------------------------------------------
While there is little research on the impacts to consumers,
research by the Federal Reserve Bank of Richmond estimates that
a standard rounding tax could cost consumers approximately $6
million annually.\22\ During debate of the bill, there was
bipartisan concern. Rep. Rose stated, ``as my colleagues on the
other side of the aisle have already expressed, simply
eliminating the penny without a well-crafted plan for the
orderly phaseout of the penny won't accomplish that goal and
could actually make things worse. As it stands, there has been
no time provided for States, retailers, or consumers to prepare
for a penniless economy.'' He continued saying, ``One of my
concerns [surrounding] the current version of the [bill] is
that it does not provide for a plan for the orderly withdrawal
of the penny from circulation, which I believe is essential for
minimizing disruptions from this momentous policy change.''\23\
---------------------------------------------------------------------------
\22\Rounding Up: The Impact of Phasing Out the Penny, Federal
Reserve Bank of Richmond (July 2025).
\23\House Committee on Financial Services, Committee Markup, 119th
Cong. (July 23, 2025).
---------------------------------------------------------------------------
During consideration, Ranking Member Waters
offered an amendment to pause the bill's termination of
penny production for three years and establish a task
force composed of local and state entities to evaluate
the impact of stopping penny production on low-income
communities, older consumers, and debanked and
underbanked groups. The Treasury Secretary is
authorized to determine, after considering the
taskforce findings, whether stopping production of the
penny is in the public interest.
Unfortunately, this amendment was not adopted. Finally,
this bill is opposed by the National Automatic Merchandising
Association and National Federation of the Blind. For the
reasons stated above, we oppose H.R. 3074.
Sincerely,
Maxine Waters,
Ranking Member.
Nydia M. Velazquez,
Stephen F. Lynch,
Al Green,
Emanuel Cleaver, II,
Joyce Beatty,
Juan Vargas,
Sylvia R. Garcia,
Members of Congress.
[all]