Skip to content

Title 42 — The Public Health and Welfare

Chapter 79 — Science and Technology Policy, Organization and Priorities

§ 6622. Coordination of advanced manufacturing research and development

Statutory text

(a)

Interagency Committee

The Director shall establish or designate a Committee on Technology under the National Science and Technology Council. The Committee shall be responsible for planning and coordinating Federal programs and activities in advanced manufacturing research and development. In furtherance of the Committee’s work, the Committee shall consult with the National Economic Council.

(b)

Responsibilities of Committee

The Committee shall—

(1)

coordinate the advanced manufacturing research and development programs and activities of the Federal agencies;

(2)

establish goals and priorities for advanced manufacturing research and development that will strengthen United States manufacturing;

(3)

work with industry organizations, Federal agencies, and Federally Funded Research and Development Centers not represented on the Committee, to identify and reduce regulatory, logistical, and fiscal barriers within the Federal government and State governments that inhibit United States manufacturing;

(4)

facilitate the transfer of intellectual property and technology based on federally supported university research into commercialization and manufacturing;

(5)

identify technological, market, or business challenges that may best be addressed by public-private partnerships, and are likely to attract both participation and primary funding from industry;

(6)

encourage the formation of public-private partnerships to respond to those challenges for transition to United States manufacturing; and

(7)

develop and update a national strategic plan for advanced manufacturing in accordance with subsection (c).

(c)

National strategic plan for advanced manufacturing

(1)

In general

The President shall submit to Congress, and publish on an Internet website that is accessible to the public, the strategic plan developed under paragraph (2).

(2)

Development

The Committee shall develop, and update as required under paragraph (4), in coordination with the National Economic Council, a strategic plan to improve Government coordination and provide long-term guidance for Federal programs and activities in support of United States manufacturing competitiveness, including advanced manufacturing research and development.

(3)

Contents

The strategic plan described in paragraph (2) shall—

(A)

specify and prioritize near-term and long-term objectives, including research and development objectives, the anticipated time frame for achieving the objectives, and the metrics for use in assessing progress toward the objectives;

(B)

describe the progress made in achieving the objectives from prior strategic plans, including a discussion of why specific objectives were not met;

(C)

specify the role, including the programs and activities, of each relevant Federal agency in meeting the objectives of the strategic plan;

(D)

describe how the Federal agencies and Federally funded research and development centers supporting advanced manufacturing research and development will foster the transfer of research and development results into new manufacturing technologies and United States-based manufacturing of new products and processes for the benefit of society to ensure national, energy, and economic security;

(E)

describe how such Federal agencies and centers will strengthen all levels of manufacturing education and training programs to ensure an adequate, well-trained workforce;

(F)

describe how such Federal agencies and centers will assist small and medium-sized manufacturers in developing and implementing new products and processes;

(G)

analyze factors that impact innovation and competitiveness for United States advanced manufacturing, including—

(i)

technology transfer and commercialization activities;

(ii)

the adequacy of the national security industrial base;

(iii)

the capabilities of the domestic manufacturing workforce;

(iv)

export opportunities and trade policies;

(v)

financing, investment, and taxation policies and practices;

(vi)

emerging technologies and markets;

(vii)

advanced manufacturing research and development undertaken by competing nations; and

(viii)

the capabilities of the manufacturing workforce of competing nations; and

(H)

elicit and consider the recommendations of a wide range of stakeholders, including representatives from diverse manufacturing companies, academia, and other relevant organizations and institutions.

(4)

Updates

Not later than , and not less frequently than once every 4 years thereafter, the President shall submit to Congress, and publish on an Internet website that is accessible to the public, an update of the strategic plan submitted under paragraph (1). Such updates shall be developed in accordance with the procedures set forth under this subsection.

(5)

Requirement to consider strategy in the budget

In preparing the budget for a fiscal year under section 1105(a) of title 31, the President shall include information regarding the consistency of the budget with the goals and recommendations included in the strategic plan developed under this subsection applying to that fiscal year.

(6)

AMP steering committee input

The Advanced Manufacturing Partnership Steering Committee of the President’s Council of Advisors on Science and Technology shall provide input, perspective, and recommendations to assist in the development and updates of the strategic plan under this subsection.

Legislative history

Reconstructed from this section’s Code source credit and amendment notes, resolved against the local Statutes at Large. Editorial notes are evidence, not the law that made the change.

  1. America COMPETES Reauthorization Act of 2010

    Pub. L. 111–358 title I § 102 · 124 Stat. 3982

    Enacted · 42 U.S.C. § 6622

    Pub. L. 111–358, title I, § 102, Jan. 4, 2011, 124 Stat. 3985

    Source evidence

    Code source credit
    Pub. L. 111–358, title I, § 102, Jan. 4, 2011, 124 Stat. 3985

    Enacted provision · exact public law section
    SEC. 102. COORDINATION OF ADVANCED MANUFACTURING RESEARCH AND DEVELOPMENT. (a) Interagency Committee.— The Director Establishment. shall establish or designate a Committee on Technology under the National Science and Technology Council. The Committee shall be responsible for planning and coordinating Federal programs and activities in advanced manufacturing research and development. (b) Responsibilities of Committee.— The Committee shall— (1) coordinate the advanced manufacturing research and development programs and activities of the Federal agencies; (2) establish goals and priorities for advanced manufacturing research and development that will strengthen United States manufacturing; (3) work with industry organizations, Federal agencies, and Federally Funded Research and Development Centers not represented on the Committee, to identify and reduce regulatory, logistical, and fiscal barriers within the Federal government and State governments that inhibit United States manufacturing; (4) facilitate the transfer of intellectual property and technology based on federally supported university research into commercialization and manufacturing; (5) identify technological, market, or business challenges that may best be addressed by public-private partnerships, and are likely to attract both participation and primary funding from industry; (6) encourage the formation of public-private partnerships to respond to those challenges for transition to United States manufacturing; and (7) develop, and update every 5 years, a strategic plan to guide Federal programs and activities in support of advanced manufacturing research and development, which shall— (A) specify and prioritize near-term and long-term research and development objectives, the anticipated time frame for achieving the objectives, and the metrics for use in assessing progress toward the objectives; (B) specify the role of each Federal agency in carrying out or sponsoring research and development to meet the objectives of the strategic plan; (C) describe how the Federal agencies and Federally Funded Research and Development Centers supporting advanced manufacturing research and development will foster the transfer of research and development results into new manufacturing technologies and United States based manufacturing of new products and processes for the benefit of society to ensure national, energy, and economic security; (D) describe how Federal agencies and Federally Funded Research and Development Centers supporting advanced manufacturing research and development will strengthen all levels of manufacturing education and training programs to ensure an adequate, well-trained workforce; (E) describe how the Federal agencies and Federally Funded Research and Development Centers supporting advanced manufacturing research and development will assist small- and medium-sized manufacturers in developing and implementing new products and processes; and (F) take into consideration the recommendations of a wide range of stakeholders, including representatives from diverse manufacturing companies, academia, and other relevant organizations and institutions. (c) Report.— Not later than 1 year after the date of enactment of this Act, the Director shall transmit the strategic plan developed under subsection (b)(7) to the Senate Committee on Commerce, Science, and Transportation, and the House of Representatives Committee on Science and Technology, and shall transmit subsequent updates to those committees as appropriate.

  2. Agriculture, Rural Development, Food and Drug Administration, and Related Agencies Appropriations Act, 2015

    Pub. L. 113–235 § 704(1) · 128 Stat. 2130

    Inserted · 42 U.S.C. § 6622(a)

    Pub. L. 113–235, § 704(1), inserted at end “In furtherance of the Committee’s work, the Committee shall consult with the National Economic Council.”

    Source evidence

    Code amendment note
    Subsec. (a). Pub. L. 113–235, § 704(1), inserted at end “In furtherance of the Committee’s work, the Committee shall consult with the National Economic Council.”

    Enacted provision · exact public law section
    Sec. 704. No funds appropriated by this Act may be used to pay negotiated indirect cost rates on cooperative agreements or similar arrangements between the United States Department of Agriculture and nonprofit institutions in excess of 10 percent of the total direct cost of the agreement when the purpose of such cooperative arrangements is to carry out programs of mutual interest between the two parties. This does not preclude appropriate payment of indirect costs on grants and contracts with such institutions when such indirect costs are computed on a similar basis for all agencies for which appropriations are provided in this Act.

  3. Agriculture, Rural Development, Food and Drug Administration, and Related Agencies Appropriations Act, 2015

    Pub. L. 113–235 § 704(2) · 128 Stat. 2130

    1. Added · 42 U.S.C. § 6622(b)(7)

      Pub. L. 113–235, § 704(2), added par. (7)

    2. Struck · 42 U.S.C. § 6622(b)(7)

      Pub. L. 113–235, § 704(2), struck out former par. (7), which related to development and updating strategic plan to guide Federal programs and activities in support of advanced manufacturing research and development

    Source evidence

    Code amendment note
    Subsec. (b)(7). Pub. L. 113–235, § 704(2), added par. (7) and struck out former par. (7), which related to development and updating strategic plan to guide Federal programs and activities in support of advanced manufacturing research and development.

    Enacted provision · exact public law section
    Sec. 704. No funds appropriated by this Act may be used to pay negotiated indirect cost rates on cooperative agreements or similar arrangements between the United States Department of Agriculture and nonprofit institutions in excess of 10 percent of the total direct cost of the agreement when the purpose of such cooperative arrangements is to carry out programs of mutual interest between the two parties. This does not preclude appropriate payment of indirect costs on grants and contracts with such institutions when such indirect costs are computed on a similar basis for all agencies for which appropriations are provided in this Act.

  4. Agriculture, Rural Development, Food and Drug Administration, and Related Agencies Appropriations Act, 2015

    Pub. L. 113–235 § 704(3) · 128 Stat. 2130

    1. Added · 42 U.S.C. § 6622(c)

      Pub. L. 113–235, § 704(3), added subsec. (c)

    2. Struck · 42 U.S.C. § 6622(c)

      Pub. L. 113–235, § 704(3), struck out former subsec. (c). Prior to amendment, text read as follows: “Not later than 1 year after January 4, 2011, the Director shall transmit the strategic plan developed under subsection (b)(7) to the Senate Committee on Commerce, Science, and Transportation, and the House of Representatives Committee on Science and Technology, and shall transmit subsequent updates to those committees as appropriate.”

    Source evidence

    Code amendment note
    Subsec. (c). Pub. L. 113–235, § 704(3), added subsec. (c) and struck out former subsec. (c). Prior to amendment, text read as follows: “Not later than 1 year after January 4, 2011, the Director shall transmit the strategic plan developed under subsection (b)(7) to the Senate Committee on Commerce, Science, and Transportation, and the House of Representatives Committee on Science and Technology, and shall transmit subsequent updates to those committees as appropriate.”

    Enacted provision · exact public law section
    Sec. 704. No funds appropriated by this Act may be used to pay negotiated indirect cost rates on cooperative agreements or similar arrangements between the United States Department of Agriculture and nonprofit institutions in excess of 10 percent of the total direct cost of the agreement when the purpose of such cooperative arrangements is to carry out programs of mutual interest between the two parties. This does not preclude appropriate payment of indirect costs on grants and contracts with such institutions when such indirect costs are computed on a similar basis for all agencies for which appropriations are provided in this Act.

6 of 6 references resolved to an enrolled provision

Editorial Notes

Codification

Section was enacted as part of the America COMPETES Reauthorization Act of 2010, also known as the America Creating Opportunities to Meaningfully Promote Excellence in Technology, Education, and Science Reauthorization Act of 2010, and not as part of the National Science and Technology Policy, Organization, and Priorities Act of 1976 which comprises this chapter.

Amendments

2014—Subsec. (a). Pub. L. 113–235, § 704(1), inserted at end “In furtherance of the Committee’s work, the Committee shall consult with the National Economic Council.”

Subsec. (b)(7). Pub. L. 113–235, § 704(2), added par. (7) and struck out former par. (7), which related to development and updating strategic plan to guide Federal programs and activities in support of advanced manufacturing research and development.

Subsec. (c). Pub. L. 113–235, § 704(3), added subsec. (c) and struck out former subsec. (c). Prior to amendment, text read as follows: “Not later than 1 year after , the Director shall transmit the strategic plan developed under subsection (b)(7) to the Senate Committee on Commerce, Science, and Transportation, and the House of Representatives Committee on Science and Technology, and shall transmit subsequent updates to those committees as appropriate.”

Statutory Notes and Related Subsidiaries

Change of Name

Committee on Science and Technology of House of Representatives changed to Committee on Science, Space, and Technology of House of Representatives by House Resolution No. 5, One Hundred Twelfth Congress, .

Definition

For definition of “Director” as used in this section, see section 2 of Pub. L. 111–358, set out as a note under section 6621 of this title.

Credits

2011–2014 · 2 acts
  1. 2011Pub. L. 111–358, title I, § 102, , 124 Stat. 3985
  2. 2014Pub. L. 113–235, div. B, title VII, § 704, , 128 Stat. 2229.
Show as published

(Pub. L. 111–358, title I, § 102, , 124 Stat. 3985; Pub. L. 113–235, div. B, title VII, § 704, , 128 Stat. 2229.)

Parsed from the official OLRC USLM XML in data/usc_all/usc42.xml · release point 119-108 · OLRC build 2026-09-09

USLM identifier /us/usc/t42/s6622