Skip to content

Title 49 — Transportation

Part A · Chapter 445 — Facilities, Personnel, and Research

§ 44518. Advanced Materials Center of Excellence

Statutory text

(a)

In General.—

(1)

Continued operations.—

The Administrator shall—

(A)

continue operation of the Advanced Materials Center of Excellence (referred to in this section as the “Center”); and

(B)

make a determination on whether to award a grant to the Center not later than 90 days after the date on which the grants officer of the Federal Aviation Administration recommends a proposal for award of such grant to the Administrator.

(2)

Purposes.—

The Center shall—

(A)

focus on applied research and training on the safe use of composites and advanced materials, and related manufacturing practices, in airframe structures; and

(B)

conduct research and development into aircraft structure crash worthiness and passenger safety, as well as address safe and accessible air travel of individuals with a disability (as defined in section 382.3 of title 14, Code of Federal Regulations (or any successor regulation)), including materials required to facilitate safe wheelchair restraint systems on commercial aircraft.

(b)

Responsibilities.—

The Center shall—

(1)

promote and facilitate collaboration among member universities, academia, the Administration, the commercial aircraft industry, including manufacturers, commercial air carriers, and suppliers, and other appropriate stakeholders for the purposes under subsection (a) and the activities described in paragraphs (2) through (4);

(2)

carry out research and development activities to advance technology, improve engineering practices, and facilitate continuing education in relevant areas of study, which shall include—

(A)

all structural materials, including—

(i)

metallic and non-metallic based additive materials, ceramic materials, carbon fiber polymers, and thermoplastic composites;

(ii)

the long-term material and structural behavior of such materials; and

(iii)

evaluating the resiliency and long-term durability of advanced materials in high temperature conditions and in engines for applications in advanced aircraft; and

(B)

structural technologies, such as additive manufacturing, to be used in applications within the commercial aircraft industry, including traditional fixed-wing aircraft, rotorcraft, and emerging aircraft types such as advanced air mobility aircraft; and

(3)

conduct research activities for the purpose of improving the safety and certification of aviation structures, materials, and additively manufactured aviation products and components; and

(4)

conducting 1 research activities to advance the safe movement of all passengers, including individuals with a disability (as defined in section 382.3 of title 14, Code of Federal Regulations (or any successor regulation)), and individuals using personal wheelchairs in flight, that takes into account the modeling, engineering, testing, operating, and training issues significant to all passengers and relevant stakeholders.

(c)

Authorization of Appropriations.—

Out of amounts appropriated under section 48102(a), the Administrator may expend not more than $10,000,000 for each of fiscal years 2021 through 2023 to carry out this section. Amounts appropriated under the preceding sentence for each fiscal year shall remain available until expended.

Footnotes

  1. 1 So in original. Probably should be “conduct”.

Legislative history

Reconstructed from this section’s Code source credit and amendment notes, resolved against the local Statutes at Large. Editorial notes are evidence, not the law that made the change.

  1. FAA Leadership in Groundbreaking High-Tech Research and Development Act

    Pub. L. 115–254 div. B title VII § 762(a) · 132 Stat. 3187

    Enacted · 49 U.S.C. § 44518

    Added Pub. L. 115–254, div. B, title VII, § 762(a), Oct. 5, 2018, 132 Stat. 3428

    Source evidence

    Code source credit
    Added Pub. L. 115–254, div. B, title VII, § 762(a), Oct. 5, 2018, 132 Stat. 3428

    Enacted provision · exact public law section
    (a) In General.— Chapter 445 of title 49, United States Code, is amended by adding at the end the following: “§ 44518. Advanced Materials Center of Excellence “(a) In General.— The Administrator of the Federal Aviation Administration shall continue operation of the Advanced Materials Center of Excellence (referred to in this section as the ‘Center’) under its structure as in effect on March 1, 2016, which shall focus on applied research and training on the durability and maintainability of advanced materials in transport airframe structures. “(b) Responsibilities.— The Center shall— “(1) promote and facilitate collaboration among academia, the Transportation Division of the Federal Aviation Administration, and the commercial aircraft industry, including manufacturers, commercial air carriers, and suppliers; and “(2) establish goals set to advance technology, improve engineering practices, and facilitate continuing education in relevant areas of study.” .

  2. Military Construction, Veterans Affairs, and Related Agencies Appropriations Act, 2021

    Pub. L. 116–260 div. V title I § 134 · 134 Stat. 1182

    Added · 49 U.S.C. § 44518(c)

    Pub. L. 116–260 added subsec. (c)

    Source evidence

    Code amendment note
    Subsec. (c). Pub. L. 116–260 added subsec. (c).

    Enacted provision · exact public law section
    Sec. 134. Of the unobligated balances available from prior appropriations Acts under the heading “Department of Defense—Military Construction, Defense-Wide”, $131,000,000 is hereby rescinded, and in addition to amounts otherwise provided for this fiscal year, an amount of additional new budget authority equivalent to the amount rescinded pursuant to this section is hereby appropriated, to remain available until September 30, 2025, and shall be available for the same purposes and under the same authorities as provided under such heading: Provided, That no amounts may be rescinded from amounts that were designated by the Congress for Overseas Contingency Operations/Global War on Terrorism or as an emergency requirement pursuant to a concurrent resolution on the budget or the Balanced Budget and Emergency Deficit Control Act of 1985: Provided further, That projects funded using amounts available under this section are subject to authorization prior to obligation and expenditure of funds to carry out construction: Provided further, That Expenditure plan. Deadline. amounts made available under this section may not be obligated or expended until the Secretary of Defense, or his or her designee, submits to the Committees on Appropriations of both Houses of Congress a detailed expenditure plan not later than 30 days after enactment of this Act.

  3. Pub. L. 118–63 § 1005(1) · 138 Stat. 1387

    1. Added · 49 U.S.C. § 44518(a)

      Pub. L. 118–63, § 1005(1), added subsec. (a)

    2. Struck · 49 U.S.C. § 44518(a)

      Pub. L. 118–63, § 1005(1), struck out former subsec. (a). Prior to amendment, text read as follows: “The Administrator of the Federal Aviation Administration shall continue operation of the Advanced Materials Center of Excellence (referred to in this section as the “Center”) under its structure as in effect on March 1, 2016, which shall focus on applied research and training on the durability and maintainability of advanced materials in transport airframe structures.”

    Unresolved: Pub. L. 118–63 was not found in the local Statutes at Large index.

    Source evidence

    Code amendment note
    Subsec. (a). Pub. L. 118–63, § 1005(1), added subsec. (a) and struck out former subsec. (a). Prior to amendment, text read as follows: “The Administrator of the Federal Aviation Administration shall continue operation of the Advanced Materials Center of Excellence (referred to in this section as the “Center”) under its structure as in effect on March 1, 2016, which shall focus on applied research and training on the durability and maintainability of advanced materials in transport airframe structures.”

  4. Pub. L. 118–63 § 1005(2) · 138 Stat. 1387

    1. Added · 49 U.S.C. § 44518(b)

      Pub. L. 118–63, § 1005(2), added subsec. (b)

    2. Struck · 49 U.S.C. § 44518(b)

      Pub. L. 118–63, § 1005(2), struck out former subsec. (b). Prior to amendment, text read as follows: “The Center shall—

    Unresolved: Pub. L. 118–63 was not found in the local Statutes at Large index.

    Source evidence

    Code amendment note
    Subsec. (b). Pub. L. 118–63, § 1005(2), added subsec. (b) and struck out former subsec. (b). Prior to amendment, text read as follows: “The Center shall—

    “(1) promote and facilitate collaboration among academia, the Transportation Division of the Federal Aviation Administration, and the commercial aircraft industry, including manufacturers, commercial air carriers, and suppliers; and “(2) establish goals set to advance technology, improve engineering practices, and facilitate continuing education in relevant areas of study.”

2 of 6 references resolved to an enrolled provision · 4 unresolved

Notes

Amendments2020–2024 · 2 rounds

2024

Subsec. (a). Pub. L. 118–63, § 1005(1), added subsec. (a) and struck out former subsec. (a). Prior to amendment, text read as follows: “The Administrator of the Federal Aviation Administration shall continue operation of the Advanced Materials Center of Excellence (referred to in this section as the “Center”) under its structure as in effect on , which shall focus on applied research and training on the durability and maintainability of advanced materials in transport airframe structures.”

Subsec. (b). Pub. L. 118–63, § 1005(2), added subsec. (b) and struck out former subsec. (b). Prior to amendment, text read as follows: “The Center shall—

“(1) promote and facilitate collaboration among academia, the Transportation Division of the Federal Aviation Administration, and the commercial aircraft industry, including manufacturers, commercial air carriers, and suppliers; and

“(2) establish goals set to advance technology, improve engineering practices, and facilitate continuing education in relevant areas of study.”

2020

Subsec. (c). Pub. L. 116–260 added subsec. (c).

Credits

2018–2024 · 3 acts
  1. 2018Added Pub. L. 115–254, div. B, title VII, § 762(a), , 132 Stat. 3428
  2. 2020amended Pub. L. 116–260, div. V, title I, § 134, , 134 Stat. 2356
  3. 2024Pub. L. 118–63, title X, § 1005, , 138 Stat. 1387.
Show as published

(Added Pub. L. 115–254, div. B, title VII, § 762(a), , 132 Stat. 3428; amended Pub. L. 116–260, div. V, title I, § 134, , 134 Stat. 2356; Pub. L. 118–63, title X, § 1005, , 138 Stat. 1387.)

Parsed from the official OLRC USLM XML in data/usc_all/usc49.xml · release point 119-108 · OLRC build 2026-05-04

USLM identifier /us/usc/t49/s44518