Title 15 — Commerce and Trade
Chapter 7 — National Institute of Standards and Technology
§ 278k. Hollings Manufacturing Extension Partnership
Statutory text
Definitions
In this section:
Appropriate committees of congress
The term “appropriate committees of Congress” means—
the Committee on Commerce, Science, and Transportation of the Senate; and
the Committee on Science, Space, and Technology of the House of Representatives.
Area career and technical education school
The term “area career and technical education school” has the meaning given the term in section 2302 of title 20.
Center
The term “Center” means a manufacturing extension center that—
is created under subsection (b); and
is affiliated with an eligible entity that applies for and is awarded financial support under subsection (e).
Community college
The term “community college” means an institution of higher education (as defined under section 1001(a) of title 20) at which the highest degree that is predominately awarded to students is an associate’s degree.
Eligible entity
The term “eligible entity” means a United States-based nonprofit institution, an institution of higher education, or a State, United States territory, local, or tribal government or a consortium thereof.
Historically Black college and university
The term “historically Black college and university” has the meaning given the term “part B institution” in section 1061 of title 20.
1 Institution of higher education
The term “institution of higher education” has the meaning given such term in section 1001 of title 20.
1 Hollings Manufacturing Extension Partnership or Program
The term “Hollings Manufacturing Extension Partnership” or “Program” means the program established under subsection (b).
MEP Advisory Board
The term “MEP Advisory Board” means the Manufacturing Extension Partnership Advisory Board established under subsection (n).2
Minority-serving institution
The term “minority-serving institution” means a Hispanic-serving institution as defined in section 1101a(a) of title 20; an Alaska Native-serving institution or Native Hawaiian-serving institution as defined in section 1059d(b) of title 20; or a Predominantly Black institution, Asian American and Native American Pacific Islander-serving institution, or Native American-serving nontribal institution as defined in section 1067q(c) of title 20.
Secondary school
The term “secondary school” has the meaning given such term in section 7801 of title 20.
Tribal College or University
The term “Tribal College or University” has the meaning given the term “Tribal College or University” in section 1059c of title 20.
Establishment and purpose
The Secretary, acting through the Director and, if appropriate, through other Federal officials, shall establish a program to provide assistance for the creation and support of manufacturing extension centers for the transfer of manufacturing technology and best business practices.
Objective
The objective of the Program shall be to enhance competitiveness, productivity, and technological performance in United States manufacturing through—
the transfer of manufacturing technology and techniques developed at the Institute to Centers and, through them, to manufacturing companies throughout the United States;
the participation of individuals from industry, institutions of higher education, State governments, other Federal agencies, and, when appropriate, the Institute in cooperative technology transfer activities;
efforts to make new manufacturing technology and processes usable by United States-based small and medium-sized companies;
the active dissemination of scientific, engineering, technical, and management information about manufacturing to United States-based industrial firms, including small and medium-sized manufacturing companies;
the utilization, when appropriate, of the expertise and capability that exists in Federal agencies, other than the Institute, and federally-sponsored laboratories;
the provision to secondary schools, community colleges, and area career and technical education schools, including those in underserved and rural communities, of information about the job skills needed in manufacturing companies, including small and medium-sized manufacturing businesses in the regions they serve;
the promotion and expansion of certification systems offered through industry, associations, local secondary schools and local colleges, including historically Black colleges and universities, Tribal Colleges or Universities, minority-serving institutions, community colleges, and secondary schools and colleges in underserved and rural communities, when appropriate, including efforts such as facilitating training, supporting new or existing apprenticeships or other applied learning opportunities, and providing access to information and experts, to address workforce needs and skills gaps in order to assist small- and medium-sized manufacturing businesses; and
the growth in employment and wages at United States-based small and medium-sized companies.
Activities
The activities of a Center shall include—
the establishment of automated manufacturing systems and other advanced production technologies, at United States-based industrial facilities, including small and medium manufacturing companies based on Institute-supported research, for the purpose of demonstrations and technology transfer;
the active transfer and dissemination of research findings and Center expertise to a wide range of United States-based companies and enterprises, particularly small and medium-sized manufacturers; and
the facilitation of collaborations and partnerships between United States-based small and medium-sized manufacturing companies and local high schools, community colleges, and area career and technical education schools, including those in underserved and rural communities, to help those entities better understand the specific needs of manufacturers and to help manufacturers better understand the skill sets that students learn in the programs offered by such colleges and schools.
Financial assistance
Authorization
Except as provided in paragraph (2), the Secretary may provide financial assistance for the creation and support of a Center through a cooperative agreement with an eligible entity.
Cost sharing
The Secretary may not provide more than 50 percent of the capital and annual operating and maintenance funds required to establish and support a Center.
Rule of construction
For purposes of paragraph (2), any amount received by an eligible entity for a Center under a provision of law other than paragraph (1) shall not be considered an amount provided under paragraph (1).
Regulations
The Secretary may revise or promulgate such regulations as necessary to carry out this subsection.
Applications
In general
An eligible entity shall submit an application to the Secretary at such time, in such manner, and containing such information as the Secretary may require.
Program description
The Secretary shall establish and update, as necessary—
a description of the Program;
the application procedures;
performance metrics;
criteria for determining qualified applicants; and 3
criteria for choosing recipients of financial assistance from among the qualified applicants.3
procedures for determining allowable cost share contributions; and
such other program policy objectives and operational procedures as the Secretary considers necessary.
Cost sharing
In general
To be considered for financial assistance under this section, an applicant shall provide adequate assurances that the applicant and if applicable, the applicant’s partnering organizations, will obtain funding for not less than 50 percent of the capital and annual operating and maintenance funds required to establish and support the Center from sources other than the financial assistance provided under subsection (e).
Agreements with other entities
In meeting the cost-sharing requirement under subparagraph (A), an eligible entity may enter into an agreement with 1 or more other entities, such as a private industry, institutions of higher education, or a State, United States territory, local, or tribal government for the contribution by that other entity of funding if the Secretary determines the agreement—
is programmatically reasonable;
will help accomplish programmatic objectives; and
is allocable under Program procedures under subsection (f)(2).
Legal rights
Each applicant shall include in the application a proposal for the allocation of the legal rights associated with any intellectual property which may result from the activities of the Center.
Merit review of applications
In general
The Secretary shall subject each application to merit review.
Considerations
In making a decision whether to approve an application and provide financial assistance under subsection (e), the Secretary shall consider, at a minimum—
the merits of the application, particularly those portions of the application regarding technology transfer, training and education, and adaptation of manufacturing technologies to the needs of particular industrial sectors in the United States;
the quality of service to be provided;
the geographical diversity and extent of the service area; and
the type and percentage of funding and in-kind commitment from other sources under paragraph (3).
Evaluations
Third and eighth year evaluations by panel
In general
The Secretary shall ensure that each Center is evaluated during its third and eighth years of operation by an evaluation panel appointed by the Secretary.
Composition
The Secretary shall ensure that each evaluation panel appointed under subparagraph (A) is composed of—
private experts, none of whom are connected with the Center evaluated by the panel; and
Federal officials.
Chairperson
For each evaluation panel appointed under subparagraph (B), the Secretary shall appoint a chairperson who is an official of the Institute.
Fifth year evaluations by Secretary
In the fifth year of operation of a Center, the Secretary shall conduct a review of the Center.
Performance measurement
In evaluating a Center an evaluation panel or the Secretary, as applicable, shall measure the performance of the Center against—
the objective specified in subsection (c);
the performance metrics under subsection (f)(2)(C); and
such other criterion as considered appropriate by the Secretary.
Positive evaluations
If an evaluation of a Center is positive, the Secretary may continue to provide financial assistance for the Center—
in the case of an evaluation occurring in the third year of a Center, through the fifth year of the Center;
in the case of an evaluation occurring in the fifth year of a Center, through the eighth year of the Center; and
in the case of an evaluation occurring in the eighth year of a Center, through the tenth year of the Center.
Other than positive evaluations
Probation
If an evaluation of a Center is other than positive, the Secretary shall put the Center on probation during the period beginning on the date that the Center receives notice under subparagraph (B)(i) and ending on the date that the reevaluation is complete under subparagraph (B)(iii).
Notice and reevaluation
If a Center receives an evaluation that is other than positive, the evaluation panel or Secretary, as applicable, shall—
notify the Center of the reason, including any deficiencies in the performance of the Center identified during the evaluation;
assist the Center in remedying the deficiencies by providing the Center, not less frequently than once every 3 months, an analysis of the Center, if considered appropriate by the panel or Secretary, as applicable; and
reevaluate the Center not later than 1 year after the date of the notice under clause (i).
Continued support during period of probation
In general
The Secretary may continue to provide financial assistance under subsection (e) for a Center during the probation period.
Post probation
After the period of probation, the Secretary shall not provide any financial assistance unless the Center has received a positive evaluation under subparagraph (B)(iii).
Failure to remedy
In general
If a Center fails to remedy a deficiency or to show significant improvement in performance before the end of the probation period under paragraph (5), the Secretary shall conduct a competition to select an operator for the Center under subsection (h).
Treatment of Centers subject to new competition
Upon the selection of an operator for a Center under subsection (h), the Center shall be considered a new Center and the calculation of the years of operation of that Center for purposes of paragraphs (1) through (5) of this subsection and subsection (h)(1) shall start anew.
Reapplication competition for financial assistance after 10 years
In general
If an eligible entity has operated a Center under this section for a period of 10 consecutive years, the Secretary shall conduct a competition to select an eligible entity to operate the Center in accordance with the process plan under subsection (i).
Incumbent eligible entities
An eligible entity that has received financial assistance under this section for a period of 10 consecutive years and that the Secretary determines is in good standing shall be eligible to compete in the competition under paragraph (1).
Treatment of Centers subject to reapplication competition
Upon the selection of an operator for a Center under paragraph (1), the Center shall be considered a new Center and the calculation of the years of operation of that Center for purposes of paragraphs (1) through (5) of subsection (g) shall start anew.
Process plan
Not later than 180 days after , the Secretary shall implement and submit to Congress a plan for how the Institute will conduct an evaluation, competition, and reapplication competition under this section.
Operational requirements
Protection of confidential information of Center clients
The following information, if obtained by the Federal Government in connection with an activity of a Center or the Program, shall be exempt from public disclosure under section 552 of title 5:
Information on the business operation of any participant in the Program or of a client of a Center.
Trade secrets of any client of a Center.
Oversight boards
In general
As a condition on receipt of financial assistance for a Center under subsection (e), an eligible entity shall establish a board to oversee the operations of the Center.
Standards
In general
The Director shall establish appropriate standards for each board described under paragraph (1).
Considerations
In establishing the standards, the Director shall take into account the type and organizational structure of an eligible entity.
Requirements
The standards shall address—
membership;
composition;
term limits;
conflicts of interest; and
such other requirements as the Director considers necessary.
Membership
In general
Each board established under paragraph (1) shall be composed of members as follows:
The membership of each board shall be representative of stakeholders in the region in which the Center is located.
A majority of the members of the board shall be selected from among individuals who own or are employed by small or medium-sized manufacturers.
Limitation
A member of a board established under paragraph (1) may not serve on more than 1 board established under that paragraph.
Bylaws
In general
Each board established under paragraph (1) shall adopt and submit to the Director bylaws to govern the operation of the board.
Conflicts of interest
Bylaws adopted under subparagraph (A) shall include policies to minimize conflicts of interest, including such policies relating to disclosure of relationships and recusal as may be necessary to minimize conflicts of interest.
Acceptance of funds
In general
To the extent provided in advance in appropriations Acts, other Federal departments and agencies may transfer amounts to the Institute, and the Secretary and Director may accept and make available cash donations from the private sector pursuant to section 272(c)(7) of this title, to be used for strengthening United States manufacturing under this section.
Competitive awards
Funds accepted from other Federal departments and agencies and from the private sector under paragraph (1) shall be awarded competitively by the Secretary and Director to Centers, provided that the Secretary and Director may make noncompetitive 3 awards, pursuant to this section or section 278k–1 of this title, or as a non-competitive 3 contract, as appropriate, if the Secretary and Director determine that—
the manufacturing market or sector targeted is limited geographically or in scope;
the number of States (or territory, in the case of Puerto Rico) with Centers serving manufacturers of such market or sector is five or fewer; and
such Center has or Centers have received a positive evaluation in the most recent evaluation conducted pursuant to subsection (g).
MEP Advisory Board
Establishment
There is established within the Institute a Manufacturing Extension Partnership Advisory Board.
Membership
Composition
In general
The MEP Advisory Board shall consist of not fewer than 10 members appointed by the Director and broadly representative of stakeholders.
Requirements
Of the members appointed under clause (i)—
at least 2 members shall be employed by or on an advisory board for a Center;
at least 5 members shall be from United States small businesses in the manufacturing sector; and
at least 1 member shall represent a community college.
Limitation
No member of the MEP Advisory Board shall be an employee of the Federal Government.
Term
Except as provided in subparagraph (C), the term of office of each member of the MEP Advisory Board shall be 3 years.
Vacancies
Any member appointed to fill a vacancy occurring prior to the expiration of the term for which his predecessor was appointed shall be appointed for the remainder of such term.
Serving consecutive terms
Any person who has completed 2 consecutive full terms of service on the MEP Advisory Board shall thereafter be ineligible for appointment during the 1-year period following the expiration of the second such term.
Meetings
The MEP Advisory Board shall—
meet not less than biannually; and
provide to the Director—
advice on the activities, plans, and policies of the Program;
assessments of the soundness of the plans and strategies of the Program; and
assessments of current performance against the plans of the Program.
Applicability of chapter 10 of title 5
In general
In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with chapter 10 of title 5.
Exception
Section 1013 of title 5 shall not apply to the MEP Advisory Board.
Annual report
In general
At a minimum, the MEP Advisory Board shall transmit an annual report to the Secretary for transmittal to Congress not later than 30 days after the submission to Congress of the President’s annual budget under section 1105 of title 31.
Contents
The report shall address the status of the Program and describe the relevant sections of the programmatic planning document and updates thereto transmitted to Congress by the Director under subsections (c) and (d) of section 278i 4 of this title.
Small manufacturers
Evaluation of obstacles
As part of the Program, the Director shall—
identify obstacles that prevent United States-based small manufacturers from effectively competing in the global market;
implement a comprehensive plan to train the Centers to address the obstacles identified in paragraph (2); and
facilitate improved communication between the Centers to assist such manufacturers in implementing appropriate, targeted solutions to the obstacles identified in paragraph (2).
Development of open access resources
As part of the Program, the Secretary shall develop open access resources that address best practices related to inventory sourcing, supply chain management, manufacturing techniques, available Federal resources, and other topics to further the competitiveness and profitability of small manufacturers.
Footnotes
Legislative history
Reconstructed from this section’s Code source credit and amendment notes, resolved against the local Statutes at Large. Editorial notes are evidence, not the law that made the change.
Technology Competitiveness Act
Pub. L. 100–418 title V § 5121(a) · 102 Stat. 1107
Enacted · 15 U.S.C. § 278k
Mar. 3, 1901, ch. 872, § 25, as added Pub. L. 100–418, title V, § 5121(a), Aug. 23, 1988, 102 Stat. 1433
Source evidence
Code source credit
Mar. 3, 1901, ch. 872, § 25, as added Pub. L. 100–418, title V, § 5121(a), Aug. 23, 1988, 102 Stat. 1433Enacted provision · exact public law section
(a) Technology Centers and Technical Assistance.— The Act of March 3, 1901, as amended by this part, is further amended by adding after section 24 the following new sections: “Sec. 25. “regional centers for the transfer of manufacturing technology (a) The Secretary, through the Director and, if appropriate, 15 USC 278k. through other officials, shall provide assistance for the creation and support of Regional Centers for the Transfer of Manu- facturing Technology (hereafter in this Act referred to as the ‘Centers’). Such centers shall be affiliated with any United States-based nonprofit institution or organization, or group thereof, that applies for and is awarded financial assistance under this section in accordance with the description published by the Secretary in the Federal Register under subsection (c)(2). Individual awards shall be decided on the basis of merit review. The objective of the Centers is to enhance productivity and technological performance in United States manufacturing through— “(1) the transfer of manufacturing technology and techniques developed at the Institute to Centers and, through them, to manufacturing companies throughout the United States; “(2) the participation of individuals from industry, universities, State governments, other Federal agencies, and, when appropriate, the Institute in cooperative technology transfer activities; “(3) efforts to make new manufacturing technology and processes usable by United States-based small- and medium-sized companies; “(4) the active dissemination of scientific, engineering, technical, and management information about manufacturing to industrial firms, including small- and medium-sized manufacturing companies; and “(5) the utilization, when appropriate, of the expertise and capability that exists in Federal laboratories other than the Institute. “(b) The activities of the Centers shall include— “(1) the establishment of automated manufacturing systems and other advanced production technologies, based on research by the Institute, for the purpose of demonstrations and technology transfer; “(2) the active transfer and dissemination of research findings and Center expertise to a wide range of companies and enterprises, particularly small- and medium-sized manufacturers; and “(3) loans, on a selective, short-term basis, of items of advanced manufacturing equipment to small manufacturing firms with less than 100 employees. “(c) (1) The Secretary may provide financial support to any Center created under subsection (a) for a period not to exceed six years. The Secretary may not provide to a Center more than 50 percent of the capital and annual operating and maintenance funds required to create and maintain such Center. “(2) The Secretary shall publish in the Federal Register, within 90 days after the date of the enactment of this section, a draft description of a program for establishing Centers, including— “(A) a description of the program; “(B) procedures to be followed by applicants; “(C) criteria for determining qualified applicants; “(D) criteria, including those listed under paragraph (4), for choosing recipients of financial assistance under this section from among the qualified applicants; and “(E) maximum support levels expected to be available to Centers under the program in the fourth through sixth years of assistance under this section. The Secretary shall publish a final description under this paragraph after the expiration of a 30-day comment period. “(3) Any nonprofit institution, or group thereof, or consortia of nonprofit institutions, including entities existing on the date of the enactment of this section, may submit to the Secretary an application for financial support under this subsection, in accordance with the procedures established by the Secretary and published in the Federal Register under paragraph (2). In order to receive assistance under this section, an applicant shall provide adequate assurances that it will contribute 50 percent or more of the proposed Center’s capital and annual operating and maintenance costs for the first three years and an increasing share for each of the last three years. Each applicant shall also submit a proposal for the allocation of the legal rights associated with any invention which may result from the proposed Center’s activities. “(4) The Secretary shall subject each such application to merit review. In making a decision whether to approve such application and provide financial support under this subsection, the Secretary shall consider at a minimum (A) the merits of the application, particularly those portions of the application regarding technology transfer, training and education, and adaptation of manufacturing technologies to the needs of particular industrial sectors, (B) the quality of service to be provided, (C) geographical diversity and extent of service area, and (D) the percentage of funding and amount of in-kind commitment from other sources. “(5) Each Center which receives financial assistance under this section shall be evaluated during its third year of operation by an evaluation panel appointed by the Secretary. Each such evaluation panel shall be composed of private experts, none of whom shall be connected with the involved Center, and Federal officials. An official of the Institute shall chair the panel. Each evaluation panel shall measure the involved Center’s performance against the objectives specified in this section. The Secretary shall not provide funding for the fourth through the sixth years of such Center’s operation unless the evaluation is positive. If the evaluation is positive, the Secretary may provide continued funding through the sixth year at declining levels, which are designed to ensure that the Center no longer needs financial support from the Institute by the seventh year. In no event shall funding for a Center be provided by the Department of Commerce after the sixth year of the operation of a Center. “(6) The provisions of chapter 18 of title 35, United States Code, shall (to the extent not inconsistent with this section) apply to the promotion of technology from research by Centers under this section. “(d) There are authorized to be appropriated for the purposes of Appropriation authorization. carrying out this section, a combined total of not to exceed $40,000,000 for fiscal years 1989 and 1990. Such sums shall remain available until expended. “Sec. 26. “assistance to state technology programs (a) In addition to the Centers program created under 15 USC 278l. section 25, the Secretary, through the Director and, if appropriate, through other officials, shall provide technical assistance to State technology programs throughout the United States, in order to help those programs help businesses, particularly small- and medium-sized businesses, to enhance their competitiveness through the application of science and technology. “(b) Such assistance from the Institute to State technology programs shall include, but not be limited to— “(1) technical information and advice from Institute personnel; “(2) workshops and seminars for State officials interested in transferring Federal technology to businesses; and “(3) entering into cooperative agreements when authorized to do so under this or any other Act.”Technology Administration Authorization Act of 1991
Pub. L. 102–245 § 105(e)(1) · 106 Stat. 7
Inserted · 15 U.S.C. § 278k(c)(6)
Pub. L. 102–245, § 105(e)(1), inserted before period at end “except for contracts for such specific technology extension or transfer services as may be specified by statute or by the Director”
Source evidence
Code amendment note
Subsec. (c)(6). Pub. L. 102–245, § 105(e)(1), inserted before period at end “except for contracts for such specific technology extension or transfer services as may be specified by statute or by the Director”.Enacted provision · exact public law section
(1) Section 25(c)(6) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(c)(6)) is amended by inserting before the period at the end the following: “except for contracts for such specific technology extension or transfer services as may be specified by statute or by the Director”.Technology Administration Authorization Act of 1991
Pub. L. 102–245 § 105(e)(2) · 106 Stat. 7
Amended · 15 U.S.C. § 278k(d)
Pub. L. 102–245, § 105(e)(2), amended subsec. (d) generally. Prior to amendment, subsec. (d) read as follows: “There are authorized to be appropriated for the purposes of carrying out this section, a combined total of not to exceed $40,000,000 for fiscal years 1989 and 1990. Such sums shall remain available until expended.”
Source evidence
Code amendment note
Subsec. (d). Pub. L. 102–245, § 105(e)(2), amended subsec. (d) generally. Prior to amendment, subsec. (d) read as follows: “There are authorized to be appropriated for the purposes of carrying out this section, a combined total of not to exceed $40,000,000 for fiscal years 1989 and 1990. Such sums shall remain available until expended.”Enacted provision · exact public law section
(2) Section 25(d) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(d)) is amended to read as follows: “(d) In addition to such sums as may be authorized and appropriated to the Secretary and Director to operate the Centers program, the Secretary and Director also may accept funds from other Federal departments and agencies for the purpose of providing Federal funds to support Centers. Any Center which is supported with funds which originally came from other Federal departments and agencies shall be selected and operated according to the provisions of this section.”.Technology Administration Act of 1998
Pub. L. 105–309 § 2 · 112 Stat. 2935
Substituted · 15 U.S.C. § 278k(c)(5)
Pub. L. 105–309 substituted “. After the sixth year, a Center may receive additional financial support under this section if it has received a positive evaluation through an independent review, under procedures established by the Institute. Such an independent review shall be required at least every two years after the sixth year of operation. Funding received for a fiscal year under this section after the sixth year of operation shall not exceed one third of the capital and annual operating and maintenance costs of the Center under the program.” for “, which are designed to ensure that the Center no longer needs financial support from the Institute by the seventh year. In no event shall funding for a Center be provided by the Department of Commerce after the sixth year of the operation of a Center.”
Source evidence
Code amendment note
Subsec. (c)(5). Pub. L. 105–309 substituted “. After the sixth year, a Center may receive additional financial support under this section if it has received a positive evaluation through an independent review, under procedures established by the Institute. Such an independent review shall be required at least every two years after the sixth year of operation. Funding received for a fiscal year under this section after the sixth year of operation shall not exceed one third of the capital and annual operating and maintenance costs of the Center under the program.” for “, which are designed to ensure that the Center no longer needs financial support from the Institute by the seventh year. In no event shall funding for a Center be provided by the Department of Commerce after the sixth year of the operation of a Center.”Enacted provision · exact public law section
SEC. 2. MANUFACTURING EXTENSION PARTNERSHIP PROGRAM CENTER EXTENSION. Section 25(c)(5) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(c)(5)) is amended by striking “, which are designed” and all that follows through “operation of a Center.” and inserting in lieu thereof “. After the sixth year, a Center may receive additional financial support under this section if it has received a positive evaluation through an independent review, under procedures established by the Institute. Such an independent review shall be required at least every two years after the sixth year of operation. Funding received for a fiscal year under this section after the sixth year of operation shall not exceed one third of the capital and annual operating and maintenance costs of the Center under the program.”.America COMPETES Act
Pub. L. 110–69 § 3003(a) · 121 Stat. 572
Amended · 15 U.S.C. § 278k(c)(3)
Pub. L. 110–69, § 3003(a), amended par. (3) generally. Prior to amendment, par. (3) read as follows: “Any nonprofit institution, or group thereof, or consortia of nonprofit institutions, including entities existing on August 23, 1988, may submit to the Secretary an application for financial support under this subsection, in accordance with the procedures established by the Secretary and published in the Federal Register under paragraph (2). In order to receive assistance under this section, an applicant shall provide adequate assurances that it will contribute 50 percent or more of the proposed Center’s capital and annual operating and maintenance costs for the first three years and an increasing share for each of the last three years. Each applicant shall also submit a proposal for the allocation of the legal rights associated with any invention which may result from the proposed Center’s activities.”
Source evidence
Code amendment note
Subsec. (c)(3). Pub. L. 110–69, § 3003(a), amended par. (3) generally. Prior to amendment, par. (3) read as follows: “Any nonprofit institution, or group thereof, or consortia of nonprofit institutions, including entities existing on August 23, 1988, may submit to the Secretary an application for financial support under this subsection, in accordance with the procedures established by the Secretary and published in the Federal Register under paragraph (2). In order to receive assistance under this section, an applicant shall provide adequate assurances that it will contribute 50 percent or more of the proposed Center’s capital and annual operating and maintenance costs for the first three years and an increasing share for each of the last three years. Each applicant shall also submit a proposal for the allocation of the legal rights associated with any invention which may result from the proposed Center’s activities.”Enacted provision · exact public law section
(a) Clarification of Eligible Contributions in Connection With Regional Centers Responsible for Implementing the Objectives of the Program.— Paragraph (3) of section 25(c) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(c)(3)) is amended to read as follows: “(3) (A) Any nonprofit institution, or group thereof, or consortia of nonprofit institutions, including entities existing on August 23, 1988, may submit to the Secretary an application for financial support under this subsection, in accordance with the procedures established by the Secretary and published in the Federal Register under paragraph (2). “(B) In order to receive assistance under this section, an applicant for financial assistance under subparagraph (A) shall provide adequate assurances that non-Federal assets obtained from the applicant and the applicant’s partnering organizations will be used as a funding source to meet not less than 50 percent of the costs incurred for the first 3 years and an increasing share for each of the last 3 years. For purposes of the preceding sentence, the costs incurred means the costs incurred in connection with the activities undertaken to improve the management, productivity, and technological performance of small- and medium-sized manufacturing companies. “(C) In meeting the 50 percent requirement, it is anticipated that a Center will enter into agreements with other entities such as private industry, universities, and State governments to accomplish programmatic objectives and access new and existing resources that will further the impact of the Federal investment made on behalf of small- and medium-sized manufacturing companies. All non-Federal costs, contributed by such entities and determined by a Center as programmatically reasonable and allocable under MEP program procedures are includable as a portion of the Center’s contribution. “(D) Proposal. Each applicant under subparagraph (A) shall also submit a proposal for the allocation of the legal rights associated with any invention which may result from the proposed Center’s activities.” .America COMPETES Act
Pub. L. 110–69 § 3003(b) · 121 Stat. 572
Inserted · 15 U.S.C. § 278k(c)(5)
Pub. L. 110–69, § 3003(b), inserted “A Center that has not received a positive evaluation by the evaluation panel shall be notified by the panel of the deficiencies in its performance and shall be placed on probation for one year, after which time the panel shall reevaluate the Center. If the Center has not addressed the deficiencies identified by the panel, or shown a significant improvement in its performance, the Director shall conduct a new competition to select an operator for the Center or may close the Center.” after “at declining levels.”
Source evidence
Code amendment note
Subsec. (c)(5). Pub. L. 110–69, § 3003(b), inserted “A Center that has not received a positive evaluation by the evaluation panel shall be notified by the panel of the deficiencies in its performance and shall be placed on probation for one year, after which time the panel shall reevaluate the Center. If the Center has not addressed the deficiencies identified by the panel, or shown a significant improvement in its performance, the Director shall conduct a new competition to select an operator for the Center or may close the Center.” after “at declining levels.”Enacted provision · exact public law section
(b) Manufacturing Center Evaluation.— Paragraph (5) of section 25(c) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(c)(5)) is amended by inserting “A Center that has not received a positive evaluation by the evaluation panel shall be notified by the panel of the deficiencies in its performance and shall be placed on probation for one year, after which time the panel shall reevaluate the Center. If the Center has not addressed the deficiencies identified by the panel, or shown a significant improvement in its performance, the Director shall conduct a new competition to select an operator for the Center or may close the Center.” after “at declining levels.”.America COMPETES Act
Pub. L. 110–69 § 3003(c) · 121 Stat. 572
Added · 15 U.S.C. § 278k(d)
Pub. L. 110–69, § 3003(c), added subsec. (d)
Struck · 15 U.S.C. § 278k(d)
Pub. L. 110–69, § 3003(c), struck out former subsec. (d). Text of former subsec. (d) read as follows: “In addition to such sums as may be authorized and appropriated to the Secretary and Director to operate the Centers program, the Secretary and Director also may accept funds from other Federal departments and agencies for the purpose of providing Federal funds to support Centers. Any Center which is supported with funds which originally came from other Federal departments and agencies shall be selected and operated according to the provisions of this section.”
Source evidence
Code amendment note
Subsec. (d). Pub. L. 110–69, § 3003(c), added subsec. (d) and struck out former subsec. (d). Text of former subsec. (d) read as follows: “In addition to such sums as may be authorized and appropriated to the Secretary and Director to operate the Centers program, the Secretary and Director also may accept funds from other Federal departments and agencies for the purpose of providing Federal funds to support Centers. Any Center which is supported with funds which originally came from other Federal departments and agencies shall be selected and operated according to the provisions of this section.”Enacted provision · exact public law section
(c) Federal Share.— Section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k) is amended by striking subsection (d) and inserting the following: “(d) Acceptance of Funds.— “(1) In general.— In addition to such sums as may be appropriated to the Secretary and Director to operate the Centers program, the Secretary and Director also may accept funds from other Federal departments and agencies and under section 2(c)(7) from the private sector for the purpose of strengthening United States manufacturing. “(2) Allocation of funds.— “(A) Funds accepted from other federal departments or agencies.— The Director shall determine whether funds accepted from other Federal departments or agencies shall be counted in the calculation of the Federal share of capital and annual operating and maintenance costs under subsection (c). “(B) Funds accepted from the private sector.— Funds accepted from the private sector under section 2(c)(7), if allocated to a Center, shall not be considered in the calculation of the Federal share under subsection (c) of this section.” .America COMPETES Act
Pub. L. 110–69 § 3003(d) · 121 Stat. 572
Added · 15 U.S.C. § 278k(e)
Pub. L. 110–69, § 3003(d), added subsec. (e)
Source evidence
Code amendment note
Subsec. (e). Pub. L. 110–69, § 3003(d), added subsec. (e).Enacted provision · exact public law section
(d) MEP Advisory Board.— Such section 25 is further amended by adding at the end the following: “(e) MEP Advisory Board.— “(1) Establishment.— There is established within the Institute a Manufacturing Extension Partnership Advisory Board (in this subsection referred to as the ‘MEP Advisory Board’). “(2) Membership.— “(A) In general.— The MEP Advisory Board shall consist of 10 members broadly representative of stakeholders, to be appointed by the Director. At least 2 members shall be employed by or on an advisory board for the Centers, and at least 5 other members shall be from United States small businesses in the manufacturing sector. No member shall be an employee of the Federal Government. “(B) Term.— Except as provided in subparagraph (C) or (D), the term of office of each member of the MEP Advisory Board shall be 3 years. “(C) Classes.— The original members of the MEP Advisory Board shall be appointed to 3 classes. One class of 3 members shall have an initial term of 1 year, one class of 3 members shall have an initial term of 2 years, and one class of 4 members shall have an initial term of 3 years. “(D) Vacancies.— Any member appointed to fill a vacancy occurring prior to the expiration of the term for which his predecessor was appointed shall be appointed for the remainder of such term. “(E) Serving consecutive terms.— Any person who has completed two consecutive full terms of service on the MEP Advisory Board shall thereafter be ineligible for appointment during the one-year period following the expiration of the second such term. “(3) Meetings.— The MEP Advisory Board shall meet not less than 2 times annually, and provide to the Director— “(A) advice on Manufacturing Extension Partnership programs, plans, and policies; “(B) assessments of the soundness of Manufacturing Extension Partnership plans and strategies; and “(C) assessments of current performance against Manufacturing Extension Partnership program plans. “(4) Federal advisory committee act.— In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with the Federal Advisory Committee Act. “(5) Report.— The MEP Advisory Board shall transmit an annual report to the Secretary for transmittal to Congress within 30 days after the submission to Congress of the President’s annual budget request in each year. Such report shall address the status of the program established pursuant to this section and comment on the relevant sections of the programmatic planning document and updates thereto transmitted to Congress by the Director under subsections (c) and (d) of section 23.” .America COMPETES Act
Pub. L. 110–69 § 3003(e) · 121 Stat. 572
Added · 15 U.S.C. § 278k(f)
Pub. L. 110–69, § 3003(e), added subsec. (f)
Source evidence
Code amendment note
Subsec. (f). Pub. L. 110–69, § 3003(e), added subsec. (f).Enacted provision · exact public law section
(e) Manufacturing Extension Center Competitive Grant Program.— Such section 25 is further amended by adding at the end the following: “(f) Competitive Grant Program.— “(1) Establishment.— The Director shall establish, within the Centers program under this section and section 26 of this Act, a program of competitive awards among participants described in paragraph (2) for the purposes described in paragraph (3). “(2) Participants.— Participants receiving awards under this subsection shall be the Centers, or a consortium of such Centers. “(3) Purpose.— The purpose of the program under this subsection is to develop projects to solve new or emerging manufacturing problems as determined by the Director, in consultation with the Director of the Centers program, the Manufacturing Extension Partnership Advisory Board, and small and medium-sized manufacturers. One or more themes for the competition may be identified, which may vary from year to year, depending on the needs of manufacturers and the success of previous competitions. These themes shall be related to projects associated with manufacturing extension activities, including supply chain integration and quality management, and including the transfer of technology based on the technological needs of manufacturers and available technologies from institutions of higher education, laboratories, and other technology producing entities, or extend beyond these traditional areas. “(4) Applications.— Applications for awards under this subsection shall be submitted in such manner, at such time, and containing such information as the Director shall require, in consultation with the Manufacturing Extension Partnership Advisory Board. “(5) Selection.— Awards under this subsection shall be peer reviewed and competitively awarded. The Director shall select proposals to receive awards— “(A) that utilize innovative or collaborative approaches to solving the problem described in the competition; “(B) that will improve the competitiveness of industries in the region in which the Center or Centers are located; and “(C) that will contribute to the long-term economic stability of that region. “(6) Program contribution.— Recipients of awards under this subsection shall not be required to provide a matching contribution.” .Export Promotion Act of 2010
Pub. L. 111–240 title IV § 4226(a) · 124 Stat. 2504
Added · 15 U.S.C. § 278k(f)(7)
Pub. L. 111–240 added par. (7) relating to global marketplace projects
Source evidence
Code amendment note
Subsec. (f)(7). Pub. L. 111–240 added par. (7) relating to global marketplace projects.Enacted provision · exact public law section
(a) Hollings Manufacturing Partnership Program.— Section 25(f) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(f)) is amended by adding at the end the following: “(7) Global marketplace projects.— In making awards under this subsection, the Director, in consultation with the Manufacturing Extension Partnership Advisory Board and the Secretary of Commerce, may— “(A) take into consideration whether an application has significant potential for enhancing the competitiveness of small and medium-sized United States manufacturers in the global marketplace; and “(B) give a preference to applications for such projects to the extent the Director deems appropriate, taking into account the broader purposes of this subsection.” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(f)(3)(A) · 124 Stat. 3982
Substituted · 15 U.S.C. § 278k(a)
Pub. L. 111–358, § 404(f)(3)(A), substituted “regional centers for the transfer of manufacturing technology” for “Regional Centers for the Transfer of Manufacturing Technology” in introductory provisions
Source evidence
Code amendment note
Subsec. (a). Pub. L. 111–358, § 404(f)(3)(A), substituted “regional centers for the transfer of manufacturing technology” for “Regional Centers for the Transfer of Manufacturing Technology” in introductory provisions.Enacted provision · exact public law section
(A) Section 25(a) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(a)) is amended in the matter preceding paragraph (1) by striking “Regional Centers for the Transfer of Manufacturing Technology” and inserting “regional centers for the transfer of manufacturing technology”.National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(a) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(a)(6)
Pub. L. 111–358, § 404(a), added par. (6)
Source evidence
Code amendment note
Subsec. (a)(6). Pub. L. 111–358, § 404(a), added par. (6).Enacted provision · exact public law section
(a) Community College Support.— Section 25(a) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(a)) is amended— (1) by striking “and” after the semicolon in paragraph (4); (2) by striking “Institute.” in paragraph (5) and inserting “Institute; and”; and (3) by adding at the end the following: “(6) providing to community colleges information about the job skills needed in small- and medium-sized manufacturing businesses in the regions they serve.” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(d) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(c)(7); 15 U.S.C. § 278k(c)(8)
Pub. L. 111–358, § 404(d), added pars. (7) and (8)
Source evidence
Code amendment note
Subsec. (c)(7), (8). Pub. L. 111–358, § 404(d), added pars. (7) and (8).Enacted provision · exact public law section
(d) Hollings Manufacturing Extension Partnership Program Cost-Sharing.— Section 25(c) of such Act (15 U.S.C. 278k(c)) is amended by adding at the end the following: “(7) Not later than 90 days after the date of enactment of the National Institute of Standards and Technology Authorization Act of 2010, the Comptroller General shall submit to Congress a report on the cost share requirements under the program. The report shall— “(A) discuss various cost share structures, including the cost share structure in place prior to such date of enactment, and the effect of such cost share structures on individual Centers and the overall program; and “(B) include recommendations for how best to structure the cost share requirement to provide for the long-term sustainability of the program.” . “(8) If consistent with the recommendations in the report transmitted to Congress under paragraph (7), the Secretary shall alter the cost structure requirements specified under paragraph (3)(B) and (5) provided that the modification does not increase the cost share structure in place before the date of enactment of the America COMPETES Reauthorization Act of 2010, or allow the Secretary to provide a Center more than 50 percent of the costs incurred by that Center.” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(e) · 124 Stat. 3982
Amended · 15 U.S.C. § 278k(e)(4)
Pub. L. 111–358, § 404(e), amended par. (4) generally. Prior to amendment, text read as follows: “In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with the Federal Advisory Committee Act.”
Source evidence
Code amendment note
Subsec. (e)(4). Pub. L. 111–358, § 404(e), amended par. (4) generally. Prior to amendment, text read as follows: “In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with the Federal Advisory Committee Act.”Enacted provision · exact public law section
(e) Advisory Board.— Section 25(e)(4) of such Act (15 U.S.C. 278k(e)(4)) is amended to read as follows: “(4) Federal advisory committee act applicability.— “(A) In general.— In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with the Federal Advisory Committee Act. “(B) Exception.— Section 14 of the Federal Advisory Committee Act shall not apply to the MEP Advisory Board.’.NIST Grants for Energy Efficiency, New Job Opportunities, and Business Solutions Act of 2010
Pub. L. 111–358 § 703(a) · 124 Stat. 3982
Substituted · 15 U.S.C. § 278k(f)(3)
Pub. L. 111–358, § 703(a), substituted “to add capabilities to the MEP program, including the development of” for “to develop”
Substituted · 15 U.S.C. § 278k(f)(3)
Pub. L. 111–358, § 703(a), substituted “Centers may be reimbursed for costs incurred under the program. These themes—” for “These themes shall be related to projects associated with manufacturing extension activities, including supply chain integration and quality management, and including the transfer of technology based on the technological needs of manufacturers and available technologies from institutions of higher education, laboratories, and other technology producing entities, or extend beyond these traditional areas.”
Added · 15 U.S.C. § 278k(f)(3)
Pub. L. 111–358, § 703(a), added subpars. (A) to (C)
Source evidence
Code amendment note
Subsec. (f)(3). Pub. L. 111–358, § 703(a), substituted “to add capabilities to the MEP program, including the development of” for “to develop” and “Centers may be reimbursed for costs incurred under the program. These themes—” for “These themes shall be related to projects associated with manufacturing extension activities, including supply chain integration and quality management, and including the transfer of technology based on the technological needs of manufacturers and available technologies from institutions of higher education, laboratories, and other technology producing entities, or extend beyond these traditional areas.” and added subpars. (A) to (C).Enacted provision · exact public law section
(a) In General.— Section 25(f)(3) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(f)(3)) is amended— (1) by striking “to develop” in the first sentence and inserting “to add capabilities to the MEP program, including the development of”; and (2) by striking the last sentence and inserting “Centers may be reimbursed for costs incurred under the program. These themes— “(A) shall be related to projects designed to increase the viability both of traditional manufacturing sectors and other sectors, such as construction, that increasingly rely on manufacturing through the use of manufactured components and manufacturing techniques, including supply chain integration and quality management; “(B) shall be related to projects related to the transfer of technology based on the technological needs of manufacturers and available technologies from institutions of higher education, laboratories, and other technology producing entities; and “(C) may extend beyond these traditional areas to include projects related to construction industry modernization.” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(i) · 124 Stat. 3982
Substituted · 15 U.S.C. § 278k(f)(3)
Pub. L. 111–358, § 404(i), substituted “Director of the Hollings MEP program,” for “Director of the Centers program,”
Target inherited from the preceding amendment note.
Source evidence
Code amendment note
Pub. L. 111–358, § 404(i), substituted “Director of the Hollings MEP program,” for “Director of the Centers program,”.Enacted provision · exact public law section
(i) NIST Act Amendment.— Section 25(f)(3) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(f)(3)) is amended by striking “Director of the Centers program,” and inserting “Director of the Hollings MEP program,”.NIST Grants for Energy Efficiency, New Job Opportunities, and Business Solutions Act of 2010
Pub. L. 111–358 § 703(b) · 124 Stat. 3982
Amended · 15 U.S.C. § 278k(f)(5)
Pub. L. 111–358, § 703(b), amended par. (5) generally. Prior to amendment, text read as follows: “Awards under this subsection shall be peer reviewed and competitively awarded. The Director shall select proposals to receive awards—
Source evidence
Code amendment note
Subsec. (f)(5). Pub. L. 111–358, § 703(b), amended par. (5) generally. Prior to amendment, text read as follows: “Awards under this subsection shall be peer reviewed and competitively awarded. The Director shall select proposals to receive awards—“(A) that utilize innovative or collaborative approaches to solving the problem described in the competition; “(B) that will improve the competitiveness of industries in the region in which the Center or Centers are located; and “(C) that will contribute to the long-term economic stability of that region.”
Enacted provision · exact public law section
(b) Selection.— Section 25(f)(5) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(f)(5)) is amended to read as follows: “(5) Selection.— “(A) In general.— Awards under this section shall be peer reviewed and competitively awarded. The Director shall endeavor to select at least one proposal in each of the 9 statistical divisions of the United States (as designated by the Bureau of the Census). The Director shall select proposals to receive awards that will— “(i) create jobs or train newly hired employees; “(ii) promote technology transfer and commercialization of environmentally focused materials, products, and processes; “(iii) increase energy efficiency; and “(iv) improve the competitiveness of industries in the region in which the Center or Centers are located. “(B) Additional selection criteria.— The Director may select proposals to receive awards that will— “(i) encourage greater cooperation and foster partnerships in the region with similar Federal, State, and locally funded programs to encourage energy efficiency and building technology; and “(ii) collect data and analyze the increasing connection between manufactured products and manufacturing techniques, the future of construction practices, and the emerging application of products from the green energy industries.” .NIST Grants for Energy Efficiency, New Job Opportunities, and Business Solutions Act of 2010
Pub. L. 111–358 § 703(c) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(f)(7)
Pub. L. 111–358, § 703(c), added par. (7) relating to duration
Source evidence
Code amendment note
Subsec. (f)(7). Pub. L. 111–358, § 703(c), added par. (7) relating to duration.Enacted provision · exact public law section
(c) Other Modifications.— Section 25(f) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(f)) is amended— (1) by adding at the end the following: “(7) Duration.— Awards under this section shall last no longer than 3 years. “(8) Eligible participants.— In addition to manufacturing firms eligible to participate in the Centers program, awards under this subsection may be used by the Centers to assist small- or medium-sized construction firms. Centers may be reimbursed under the program for working with such eligible participants. “(9) Authorization of appropriations.— In addition to any amounts otherwise authorized or appropriated to carry out this section, there are authorized to be appropriated to the Secretary of Commerce $7,000,000 for each of the fiscal years 2011 through 2013 to carry out this subsection.” .NIST Grants for Energy Efficiency, New Job Opportunities, and Business Solutions Act of 2010
Pub. L. 111–358 § 703(c) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(f)(8); 15 U.S.C. § 278k(f)(9)
Pub. L. 111–358, § 703(c), added pars. (8) and (9)
Source evidence
Code amendment note
Subsec. (f)(8), (9). Pub. L. 111–358, § 703(c), added pars. (8) and (9).Enacted provision · exact public law section
(c) Other Modifications.— Section 25(f) of the National Institute of Standards and Technology Act (15 U.S.C. 278k(f)) is amended— (1) by adding at the end the following: “(7) Duration.— Awards under this section shall last no longer than 3 years. “(8) Eligible participants.— In addition to manufacturing firms eligible to participate in the Centers program, awards under this subsection may be used by the Centers to assist small- or medium-sized construction firms. Centers may be reimbursed under the program for working with such eligible participants. “(9) Authorization of appropriations.— In addition to any amounts otherwise authorized or appropriated to carry out this section, there are authorized to be appropriated to the Secretary of Commerce $7,000,000 for each of the fiscal years 2011 through 2013 to carry out this subsection.” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(b) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(g)
Pub. L. 111–358, § 404(b), added subsec. (g)
Source evidence
Code amendment note
Subsec. (g). Pub. L. 111–358, § 404(b), added subsec. (g).Enacted provision · exact public law section
(b) Innovative Services Initiative.— Section 25 of such Act (15 U.S.C. 278k) is amended by adding at the end the following: “(g) Innovative Services Initiative.— “(1) Establishment.— The Director shall establish, within the Centers program under this section, an innovative services initiative to assist small- and medium-sized manufacturers in— “(A) reducing their energy usage, greenhouse gas emissions, and environmental waste to improve profitability; “(B) accelerating the domestic commercialization of new product technologies, including components for renewable energy and energy efficiency systems; and “(C) identification of and diversification to new markets, including support for transitioning to the production of components for renewable energy and energy efficiency systems. “(2) Market demand.— The Director may not undertake any activity to accelerate the domestic commercialization of a new product technology under this subsection unless an analysis of market demand for the new product technology has been conducted.” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(c) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(h)
Pub. L. 111–358, § 404(c), added subsec. (h)
Source evidence
Code amendment note
Subsec. (h). Pub. L. 111–358, § 404(c), added subsec. (h).Enacted provision · exact public law section
(c) Reports.— Section 25 of such Act (15 U.S.C. 278k), as amended by subsection (b), is further amended by adding at the end the following: “(h) Reports.— “(1) In general.— In submitting the 3-year programmatic planning document and annual updates under section 23, the Director shall include an assessment of the Director’s governance of the program established under this section. “(2) Criteria.— In conducting the assessment, the Director shall use the criteria established pursuant to the Malcolm Baldrige National Quality Award under section 17(d)(1)(C) of the Stevenson-Wydler Technology Innovation Act of 1980 (15 U.S.C. 3711a(d)(1)(C)).” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(f)(1) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(i)
Pub. L. 111–358, § 404(f)(1), added subsec. (i)
Source evidence
Code amendment note
Subsec. (i). Pub. L. 111–358, § 404(f)(1), added subsec. (i).Enacted provision · exact public law section
(1) In general.— Section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k), as amended by subsection (c), is further amended by adding at the end the following: “(i) Designation.— “(1) Hollings manufacturing extension partnership.— The program under this section shall be known as the ‘Hollings Manufacturing Extension Partnership’. “(2) Hollings manufacturing extension centers.— The Regional Centers for the Transfer of Manufacturing Technology created and supported under subsection (a) shall be known as the ‘Hollings Manufacturing Extension Centers’ (in this Act referred to as the ‘Centers’).” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(f)(3)(B) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(j)
Pub. L. 111–358, § 404(f)(3)(B), added subsec. (j)
Source evidence
Code amendment note
Subsec. (j). Pub. L. 111–358, § 404(f)(3)(B), added subsec. (j).Enacted provision · exact public law section
(B) Section 25 of such Act (15 U.S.C. 278k), as amended by subsection (f), is further amended by adding at the end the following: “(j) Community College Defined.— In this section, the term ‘community college’ means an institution of higher education (as defined under section 101(a) of the Higher Education Act of 1965 (20 U.S.C. 1001(a))) at which the highest degree that is predominately awarded to students is an associate’s degree.” .National Institute of Standards and Technology Authorization Act of 2010
Pub. L. 111–358 § 404(h) · 124 Stat. 3982
Added · 15 U.S.C. § 278k(k)
Pub. L. 111–358, § 404(h), added subsec. (k)
Source evidence
Code amendment note
Subsec. (k). Pub. L. 111–358, § 404(h), added subsec. (k).Enacted provision · exact public law section
(h) Evaluation of Obstacles Unique to Small Manufacturers.— Section 25 of such Act (15 U.S.C. 278k), as amended by subsection (g), is further amended by adding at the end the following: “(k) Evaluation of Obstacles Unique to Small Manufacturers.— The Director shall— “(1) evaluate obstacles that are unique to small manufacturers that prevent such manufacturers from effectively competing in the global market; “(2) implement a comprehensive plan to train the Centers to address such obstacles; and “(3) facilitate improved communication between the Centers to assist such manufacturers in implementing appropriate, targeted solutions to such obstacles.” .Manufacturing Extension Partnership Improvement Act
Pub. L. 114–329 title V § 501(b) · 130 Stat. 2969
Amended · 15 U.S.C. § 278k
Pub. L. 114–329 amended section generally. Prior to amendment, section related to establishment of regional centers for the transfer of manufacturing technology, the MEP Advisory Board, a competitive grant program, and an innovative services initiative
Source evidence
Code amendment note
Pub. L. 114–329 amended section generally. Prior to amendment, section related to establishment of regional centers for the transfer of manufacturing technology, the MEP Advisory Board, a competitive grant program, and an innovative services initiative.Enacted provision · exact public law section
(b) In General.— Section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k) is amended to read as follows: “SEC. 25. HOLLINGS MANUFACTURING EXTENSION PARTNERSHIP. “(a) Definitions.— In this section: “(1) Appropriate committees of congress.— The term ‘appropriate committees of Congress’ means— “(A) the Committee on Commerce, Science, and Transportation of the Senate; and “(B) the Committee on Science, Space, and Technology of the House of Representatives. “(2) Area career and technical education school.— The term ‘area career and technical education school’ has the meaning given the term in section 3 of the Vocational Education Act of 1963 (20 U.S.C. 2302). “(3) Center.— The term ‘Center’ means a manufacturing extension center that— “(A) is created under subsection (b); and “(B) is affiliated with an eligible entity that applies for and is awarded financial support under subsection (e). “(4) Community college.— The term ‘community college’ means an institution of higher education (as defined under section 101(a) of the Higher Education Act of 1965 (20 U.S.C. 1001(a))) at which the highest degree that is predominately awarded to students is an associate’s degree. “(5) Eligible entity.— The term ‘eligible entity’ means a United States-based nonprofit institution, or consortium thereof, an institution of higher education, or a State, United States territory, local, or tribal government. “(6) Hollings manufacturing extension partnership or program.— The term ‘Hollings Manufacturing Extension Partnership’ or ‘Program’ means the program established under subsection (b). “(7) MEP advisory board.— The term ‘MEP Advisory Board’ means the Manufacturing Extension Partnership Advisory Board established under subsection (n). “(b) Establishment and Purpose.— The Secretary, acting through the Director and, if appropriate, through other Federal officials, shall establish a program to provide assistance for the creation and support of manufacturing extension centers for the transfer of manufacturing technology and best business practices. “(c) Objective.— The objective of the Program shall be to enhance competitiveness, productivity, and technological performance in United States manufacturing through— “(1) the transfer of manufacturing technology and techniques developed at the Institute to Centers and, through them, to manufacturing companies throughout the United States; “(2) the participation of individuals from industry, institutions of higher education, State governments, other Federal agencies, and, when appropriate, the Institute in cooperative technology transfer activities; “(3) efforts to make new manufacturing technology and processes usable by United States-based small and medium-sized companies; “(4) the active dissemination of scientific, engineering, technical, and management information about manufacturing to industrial firms, including small and medium-sized manufacturing companies; “(5) the utilization, when appropriate, of the expertise and capability that exists in Federal agencies, other than the Institute, and federally-sponsored laboratories; “(6) the provision to community colleges and area career and technical education schools of information about the job skills needed in manufacturing companies, including small and medium-sized manufacturing businesses in the regions they serve; “(7) the promotion and expansion of certification systems offered through industry, associations, and local colleges when appropriate, including efforts such as facilitating training, supporting new or existing apprenticeships, and providing access to information and experts, to address workforce needs and skills gaps in order to assist small- and medium-sized manufacturing businesses; and “(8) the growth in employment and wages at United States-based small and medium-sized companies. “(d) Activities.— The activities of a Center shall include— “(1) the establishment of automated manufacturing systems and other advanced production technologies, based on Institute-supported research, for the purpose of demonstrations and technology transfer; “(2) the active transfer and dissemination of research findings and Center expertise to a wide range of companies and enterprises, particularly small and medium-sized manufacturers; and “(3) the facilitation of collaborations and partnerships between small and medium-sized manufacturing companies, community colleges, and area career and technical education schools, to help those entities better understand the specific needs of manufacturers and to help manufacturers better understand the skill sets that students learn in the programs offered by such colleges and schools. “(e) Financial Assistance.— “(1) Authorization.— Except as provided in paragraph (2), the Secretary may provide financial assistance for the creation and support of a Center through a cooperative agreement with an eligible entity. “(2) Cost sharing.— The Secretary may not provide more than 50 percent of the capital and annual operating and maintenance funds required to establish and support a Center. “(3) Rule of construction.— For purposes of paragraph (2), any amount received by an eligible entity for a Center under a provision of law other than paragraph (1) shall not be considered an amount provided under paragraph (1). “(4) Regulations.— The Secretary may revise or promulgate such regulations as necessary to carry out this subsection. “(f) Applications.— “(1) In general.— An eligible entity shall submit an application to the Secretary at such time, in such manner, and containing such information as the Secretary may require. “(2) Program description.— The Secretary shall establish and update, as necessary— “(A) a description of the Program; “(B) the application procedures; “(C) performance metrics; “(D) criteria for determining qualified applicants; and “(E) criteria for choosing recipients of financial assistance from among the qualified applicants. “(F) procedures for determining allowable cost share contributions; and “(G) such other program policy objectives and operational procedures as the Secretary considers necessary. “(3) Cost sharing.— “(A) In general.— To be considered for financial assistance under this section, an applicant shall provide adequate assurances that the applicant and if applicable, the applicant’s partnering organizations, will obtain funding for not less than 50 percent of the capital and annual operating and maintenance funds required to establish and support the Center from sources other than the financial assistance provided under subsection (e). “(B) Agreements with other entities.— In meeting the cost-sharing requirement under subparagraph (A), an eligible entity may enter into an agreement with 1 or more other entities, such as a private industry, institutions of higher education, or a State, United States territory, local, or tribal government for the contribution by that other entity of funding if the Secretary determines the agreement— “(i) is programmatically reasonable; “(ii) will help accomplish programmatic objectives; and “(iii) is allocable under Program procedures under subsection (f)(2). “(4) Legal rights.— Each applicant shall include in the application a proposal for the allocation of the legal rights associated with any intellectual property which may result from the activities of the Center. “(5) Merit review of applications.— “(A) In general.— The Secretary shall subject each application to merit review. “(B) Considerations.— In making a decision whether to approve an application and provide financial assistance under subsection (e), the Secretary shall consider, at a minimum— “(i) the merits of the application, particularly those portions of the application regarding technology transfer, training and education, and adaptation of manufacturing technologies to the needs of particular industrial sectors; “(ii) the quality of service to be provided; “(iii) the geographical diversity and extent of the service area; and “(iv) the type and percentage of funding and in-kind commitment from other sources under paragraph (3). “(g) Evaluations.— “(1) Third and eighth year evaluations by panel.— “(A) In general.— The Secretary shall ensure that each Center is evaluated during its third and eighth years of operation by an evaluation panel appointed by the Secretary. “(B) Composition.— The Secretary shall ensure that each evaluation panel appointed under subparagraph (A) is composed of— “(i) private experts, none of whom are connected with the Center evaluated by the panel; and “(ii) Federal officials. “(C) Chairperson.— For each evaluation panel appointed under subparagraph (B), the Secretary shall appoint a chairperson who is an official of the Institute. “(2) Fifth year evaluations by secretary.— In the fifth year of operation of a Center, the Secretary shall conduct a review of the Center. “(3) Performance measurement.— In evaluating a Center an evaluation panel or the Secretary, as applicable, shall measure the performance of the Center against— “(A) the objective specified in subsection (c); “(B) the performance metrics under subsection (f)(2)(C); and “(C) such other criterion as considered appropriate by the Secretary. “(4) Positive evaluations.— If an evaluation of a Center is positive, the Secretary may continue to provide financial assistance for the Center— “(A) in the case of an evaluation occurring in the third year of a Center, through the fifth year of the Center; “(B) in the case of an evaluation occurring in the fifth year of a Center, through the eighth year of the Center; and “(C) in the case of an evaluation occurring in the eighth year of a Center, through the tenth year of the Center. “(5) Other than positive evaluations.— “(A) Probation.— If an evaluation of a Center is other than positive, the Secretary shall put the Center on probation during the period beginning on the date that the Center receives notice under subparagraph (B)(i) and ending on the date that the reevaluation is complete under subparagraph (B)(iii). “(B) Notice and reevaluation.— If a Center receives an evaluation that is other than positive, the evaluation panel or Secretary, as applicable, shall— “(i) notify the Center of the reason, including any deficiencies in the performance of the Center identified during the evaluation; “(ii) assist the Center in remedying the deficiencies by providing the Center, not less frequently than once every 3 months, an analysis of the Center, if considered appropriate by the panel or Secretary, as applicable; and “(iii) reevaluate the Center not later than 1 year after the date of the notice under clause (i). “(C) Continued support during period of probation.— “(i) In general.— The Secretary may continue to provide financial assistance under subsection (e) for a Center during the probation period. “(ii) Post probation.— After the period of probation, the Secretary shall not provide any financial assistance unless the Center has received a positive evaluation under subparagraph (B)(iii). “(6) Failure to remedy.— “(A) In general.— If a Center fails to remedy a deficiency or to show significant improvement in performance before the end of the probation period under paragraph (5), the Secretary shall conduct a competition to select an operator for the Center under subsection (h). “(B) Treatment of centers subject to new competition.— Upon the selection of an operator for a Center under subsection (h), the Center shall be considered a new Center and the calculation of the years of operation of that Center for purposes of paragraphs (1) through (5) of this subsection and subsection (h)(1) shall start anew. “(h) Reapplication Competition for Financial Assistance After 10 Years.— “(1) In general.— If an eligible entity has operated a Center under this section for a period of 10 consecutive years, the Secretary shall conduct a competition to select an eligible entity to operate the Center in accordance with the process plan under subsection (i). “(2) Incumbent eligible entities.— An eligible entity that has received financial assistance under this section for a period of 10 consecutive years and that the Secretary determines is in good standing shall be eligible to compete in the competition under paragraph (1). “(3) Treatment of centers subject to reapplication competition.— Upon the selection of an operator for a Center under paragraph (1), the Center shall be considered a new Center and the calculation of the years of operation of that Center for purposes of paragraphs (1) through (5) of subsection (g) shall start anew. “(i) Process Plan.— Not later than 180 days after the date of the enactment of the American Innovation and Competitiveness Act, the Secretary shall implement and submit to Congress a plan for how the Institute will conduct an evaluation, competition, and reapplication competition under this section. “(j) Operational Requirements.— “(1) Protection of confidential information of center clients.— The following information, if obtained by the Federal Government in connection with an activity of a Center or the Program, shall be exempt from public disclosure under section 552 of title 5, United States Code: “(A) Information on the business operation of any participant in the Program or of a client of a Center. “(B) Trade secrets of any client of a Center. “(k) Oversight Boards.— “(1) In general.— As a condition on receipt of financial assistance for a Center under subsection (e), an eligible entity shall establish a board to oversee the operations of the Center. “(2) Standards.— “(A) In general.— The Director shall establish appropriate standards for each board described under paragraph (1). “(B) Considerations.— In establishing the standards, the Director shall take into account the type and organizational structure of an eligible entity. “(C) Requirements.— The standards shall address— “(i) membership; “(ii) composition; “(iii) term limits; “(iv) conflicts of interest; and “(v) such other requirements as the Director considers necessary. “(3) Membership.— “(A) In general.— Each board established under paragraph (1) shall be composed of members as follows: “(i) The membership of each board shall be representative of stakeholders in the region in which the Center is located. “(ii) A majority of the members of the board shall be selected from among individuals who own or are employed by small or medium-sized manufacturers. “(B) Limitation.— A member of a board established under paragraph (1) may not serve on more than 1 board established under that paragraph. “(4) Bylaws.— “(A) In general.— Each board established under paragraph (1) shall adopt and submit to the Director bylaws to govern the operation of the board. “(B) Conflicts of interest.— Bylaws adopted under subparagraph (A) shall include policies to minimize conflicts of interest, including such policies relating to disclosure of relationships and recusal as may be necessary to minimize conflicts of interest. “(l) Acceptance of Funds.— In addition to such sums as may be appropriated to the Secretary and Director to operate the Program, the Secretary and Director may also accept funds from other Federal departments and agencies and from the private sector under section 2(c)(7) of this Act (15 U.S.C. 272(c)(7)), to be available to the extent provided by appropriations Acts, for the purpose of strengthening United States manufacturing. “(m) MEP Advisory Board.— “(1) Establishment.— There is established within the Institute a Manufacturing Extension Partnership Advisory Board. “(2) Membership.— “(A) Composition.— “(i) In general.— The MEP Advisory Board shall consist of not fewer than 10 members appointed by the Director and broadly representative of stakeholders. “(ii) Requirements.— Of the members appointed under clause (i)— “(I) at least 2 members shall be employed by or on an advisory board for a Center; “(II) at least 5 members shall be from United States small businesses in the manufacturing sector; and “(III) at least 1 member shall represent a community college. “(iii) Limitation.— No member of the MEP Advisory Board shall be an employee of the Federal Government. “(B) Term.— Except as provided in subparagraph (C), the term of office of each member of the MEP Advisory Board shall be 3 years. “(C) Vacancies.— Any member appointed to fill a vacancy occurring prior to the expiration of the term for which his predecessor was appointed shall be appointed for the remainder of such term. “(D) Serving consecutive terms.— Any person who has completed 2 consecutive full terms of service on the MEP Advisory Board shall thereafter be ineligible for appointment during the 1-year period following the expiration of the second such term. “(3) Meetings.— The MEP Advisory Board shall— “(A) meet not less than biannually; and “(B) provide to the Director— “(i) advice on the activities, plans, and policies of the Program; “(ii) assessments of the soundness of the plans and strategies of the Program; and “(iii) assessments of current performance against the plans of the Program. “(4) FACA applicability.— “(A) In general.— In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with the Federal Advisory Committee Act (5 U.S.C. App.). “(B) Exception.— Section 14 of the Federal Advisory Committee Act shall not apply to the MEP Advisory Board. “(5) Annual report.— “(A) In general.— At a minimum, the MEP Advisory Board shall transmit an annual report to the Secretary for transmittal to Congress not later than 30 days after the submission to Congress of the President’s annual budget under section 1105 of title 31, United States Code. “(B) Contents.— The report shall address the status of the Program and describe the relevant sections of the programmatic planning document and updates thereto transmitted to Congress by the Director under subsections (c) and (d) of section 23 (15 U.S.C. 278i). “(n) Small Manufacturers.— “(1) Evaluation of obstacles.— As part of the Program, the Director shall— “(A) identify obstacles that prevent small manufacturers from effectively competing in the global market; “(B) implement a comprehensive plan to train the Centers to address the obstacles identified in paragraph (2); and “(C) facilitate improved communication between the Centers to assist such manufacturers in implementing appropriate, targeted solutions to the obstacles identified in paragraph (2). “(2) Development of open access resources.— As part of the Program, the Secretary shall develop open access resources that address best practices related to inventory sourcing, supply chain management, manufacturing techniques, available Federal resources, and other topics to further the competitiveness and profitability of small manufacturers.” .Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(b)(1) · 136 Stat. 1366
Struck and inserted · 15 U.S.C. § 278k(a)(5)
Pub. L. 117–167, § 10252(b)(1), struck out “or consortium thereof,” before “an institution of higher education” and inserted “or a consortium thereof” before period at end
Source evidence
Code amendment note
Subsec. (a)(5). Pub. L. 117–167, § 10252(b)(1), struck out “or consortium thereof,” before “an institution of higher education” and inserted “or a consortium thereof” before period at end.Enacted provision · exact public law section
(1) in subsection (a)(5)— (A) by striking “or consortium thereof,”; and (B) by inserting “or a consortium thereof” before the period at the end of the sentence;Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10255(1) · 136 Stat. 1366
Added · 15 U.S.C. § 278k(a)(6)(8)
Pub. L. 117–167, § 10255(1)–(4), added pars. (6) defining historically Black college and university and (7) defining institution of higher education
Redesignated · 15 U.S.C. § 278k(a)(6)(8)
Pub. L. 117–167, § 10255(1)–(4), redesignated former pars. (6) defining Hollings Manufacturing Extension Partnership or Program and (7) defining MEP Advisory Board as (7) and (8), respectively
Source evidence
Code amendment note
Subsec. (a)(6) to (8). Pub. L. 117–167, § 10255(1)–(4), added pars. (6) defining historically Black college and university and (7) defining institution of higher education and redesignated former pars. (6) defining Hollings Manufacturing Extension Partnership or Program and (7) defining MEP Advisory Board as (7) and (8), respectively.Enacted provision · exact public law section
(1) by redesignating paragraph (6) (relating to the definition of “Hollings Manufacturing Extension Partnership or Program”) as paragraph (7);Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10255(5) · 136 Stat. 1366
Added · 15 U.S.C. § 278k(a)(9)(11)
Pub. L. 117–167, § 10255(5), added pars. (9) to (11)
Source evidence
Code amendment note
Subsec. (a)(9) to (11). Pub. L. 117–167, § 10255(5), added pars. (9) to (11).Enacted provision · exact public law section
(5) by adding at the end the following new paragraphs: “(9) Minority-serving institution.— The term ‘minority-serving institution’ means a Hispanic-serving institution as defined in section 502(a) of the Higher Education Act of 1965 (20 U.S.C. 1101a(a)); an Alaska Native-serving institution or Native Hawaiian-serving institution as defined in section 317(b) of such Act (20 U.S.C. 1059d(b)); or a Predominantly Black institution, Asian American and Native American Pacific Islander-serving institution, or Native American-serving nontribal institution as defined in section 371(c) of such Act (20 U.S.C. 1067q(c)). “(10) Secondary school.— The term ‘secondary school’ has the meaning given such term in section 8101 of the Elementary and Secondary Education Act of 1965 (20 U.S.C. 7801). “(11) Tribal college or university.— The term ‘Tribal College or University’ has the meaning given the term ‘Tribal College or University’ in section 316 of the Higher Education Act of 1965 (20 U.S.C. 1059c).” .Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(b)(2) · 136 Stat. 1366
Inserted · 15 U.S.C. § 278k(c)(4)
Pub. L. 117–167, § 10252(b)(2), inserted “United States-based” before “industrial”
Source evidence
Code amendment note
Subsec. (c)(4). Pub. L. 117–167, § 10252(b)(2), inserted “United States-based” before “industrial”.Enacted provision · exact public law section
(2) in subsection (c)(4), by inserting “United States-based” before “industrial”;Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(d)(1)(A) · 136 Stat. 1366
Substituted · 15 U.S.C. § 278k(c)(6)
Pub. L. 117–167, § 10252(d)(1)(A), substituted “secondary schools, community colleges, and area career and technical education schools, including those in underserved and rural communities,” for “community colleges and area career and technical education schools”
Source evidence
Code amendment note
Subsec. (c)(6). Pub. L. 117–167, § 10252(d)(1)(A), substituted “secondary schools, community colleges, and area career and technical education schools, including those in underserved and rural communities,” for “community colleges and area career and technical education schools”.Enacted provision · exact public law section
(A) in paragraph (6), by striking “community colleges and area career and technical education schools” and inserting the following: “secondary schools, community colleges, and area career and technical education schools, including those in underserved and rural communities,”; andResearch and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(d)(1)(B) · 136 Stat. 1366
Substituted · 15 U.S.C. § 278k(c)(7)
Pub. L. 117–167, § 10252(d)(1)(B), substituted “local secondary schools and local colleges, including historically Black colleges and universities, Tribal Colleges or Universities, minority-serving institutions, community colleges, and secondary schools and colleges in underserved and rural communities,” for “and local colleges”
Inserted · 15 U.S.C. § 278k(c)(7)
Pub. L. 117–167, § 10252(d)(1)(B), inserted “or other applied learning opportunities” after “apprenticeships”
Source evidence
Code amendment note
Subsec. (c)(7). Pub. L. 117–167, § 10252(d)(1)(B), substituted “local secondary schools and local colleges, including historically Black colleges and universities, Tribal Colleges or Universities, minority-serving institutions, community colleges, and secondary schools and colleges in underserved and rural communities,” for “and local colleges” and inserted “or other applied learning opportunities” after “apprenticeships”.Enacted provision · exact public law section
(B) in paragraph (7)— (i) by striking “and local colleges” and inserting “local secondary schools and local colleges, including historically Black colleges and universities, Tribal Colleges or Universities, minority-serving institutions, community colleges, and secondary schools and colleges in underserved and rural communities,”; and (ii) by inserting “or other applied learning opportunities” after “apprenticeships”; andResearch and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(b)(3)(A) · 136 Stat. 1366
Inserted · 15 U.S.C. § 278k(d)(1)
Pub. L. 117–167, § 10252(b)(3)(A), inserted “at United States-based industrial facilities, including small and medium manufacturing companies” before “based”
Source evidence
Code amendment note
Subsec. (d)(1). Pub. L. 117–167, § 10252(b)(3)(A), inserted “at United States-based industrial facilities, including small and medium manufacturing companies” before “based”.Enacted provision · exact public law section
(A) in paragraph (1), by inserting “at United States-based industrial facilities, including small and medium manufacturing companies” before “based”;Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(b)(3)(B) · 136 Stat. 1366
Inserted · 15 U.S.C. § 278k(d)(2)
Pub. L. 117–167, § 10252(b)(3)(B), inserted “United States-based” before “companies”
Source evidence
Code amendment note
Subsec. (d)(2). Pub. L. 117–167, § 10252(b)(3)(B), inserted “United States-based” before “companies”.Enacted provision · exact public law section
(B) in paragraph (2), by inserting “United States-based” before “companies”; andResearch and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(d)(2) · 136 Stat. 1366
Substituted · 15 U.S.C. § 278k(d)(3)
Pub. L. 117–167, § 10252(d)(2), substituted “and local high schools, community colleges, and area career and technical education schools, including those in underserved and rural communities,” for “, community colleges, and area career and technical education schools,”
Source evidence
Code amendment note
Subsec. (d)(3). Pub. L. 117–167, § 10252(d)(2), substituted “and local high schools, community colleges, and area career and technical education schools, including those in underserved and rural communities,” for “, community colleges, and area career and technical education schools,”.Enacted provision · exact public law section
(2) in subsection (d)(3), by striking “, community colleges, and area career and technical education schools,” and inserting the following: “and local high schools, community colleges, and area career and technical education schools, including those in underserved and rural communities,”.Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(b)(3)(C) · 136 Stat. 1366
Inserted · 15 U.S.C. § 278k(d)(3)
Pub. L. 117–167, § 10252(b)(3)(C), inserted “United States-based” before “small”
Target inherited from the preceding amendment note.
Source evidence
Code amendment note
Pub. L. 117–167, § 10252(b)(3)(C), inserted “United States-based” before “small”.Enacted provision · exact public law section
(C) in paragraph (3), by inserting “United States-based” before “small”;Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(b)(4) · 136 Stat. 1366
Inserted · 15 U.S.C. § 278k(f)(5)(B)(i)
Pub. L. 117–167, § 10252(b)(4), inserted before semicolon at end “in the United States”
Source evidence
Code amendment note
Subsec. (f)(5)(B)(i). Pub. L. 117–167, § 10252(b)(4), inserted before semicolon at end “in the United States”.Enacted provision · exact public law section
(4) in subsection (f)(5)(B)(i), by inserting “in the United States” before the semicolon at the end of the clause; andResearch and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(a) · 136 Stat. 1366
Amended · 15 U.S.C. § 278k(l)
Pub. L. 117–167, § 10252(a), amended subsec. (l) generally. Prior to amendment, text read as follows: “In addition to such sums as may be appropriated to the Secretary and Director to operate the Program, the Secretary and Director may also accept funds from other Federal departments and agencies and from the private sector under section 272(c)(7) of this title, to be available to the extent provided by appropriations Acts, for the purpose of strengthening United States manufacturing.”
Source evidence
Code amendment note
Subsec. (l). Pub. L. 117–167, § 10252(a), amended subsec. (l) generally. Prior to amendment, text read as follows: “In addition to such sums as may be appropriated to the Secretary and Director to operate the Program, the Secretary and Director may also accept funds from other Federal departments and agencies and from the private sector under section 272(c)(7) of this title, to be available to the extent provided by appropriations Acts, for the purpose of strengthening United States manufacturing.”Enacted provision · exact public law section
(a) Acceptance of Funds.— Subsection (l) of section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k) is amended to read as follows: “(l) Acceptance of Funds.— “(1) In general.— To the extent provided in advance in appropriations Acts, other Federal departments and agencies may transfer amounts to the Institute, and the Secretary and Director may accept and make available cash donations from the private sector pursuant to section 2(c)(7), to be used for strengthening United States manufacturing under this section. “(2) Competitive awards.— Funds accepted from other Federal departments and agencies and from the private sector under paragraph (1) shall be awarded competitively by the Secretary and Director to Centers, provided that the Secretary and Director may make noncompetitive awards, pursuant to this section or section 25A, or as a non-competitive contract, as appropriate, if the Secretary and Director determine that— “(A) the manufacturing market or sector targeted is limited geographically or in scope; “(B) the number of States (or territory, in the case of Puerto Rico) with Centers serving manufacturers of such market or sector is five or fewer; and “(C) such Center has or Centers have received a positive evaluation in the most recent evaluation conducted pursuant to subsection (g).” .Research and Development, Competition, and Innovation Act
Pub. L. 117–167 § 10252(b)(5) · 136 Stat. 1366
Inserted · 15 U.S.C. § 278k(n)(1)(A)
Pub. L. 117–167, § 10252(b)(5), inserted “United States-based” before “small”
Source evidence
Code amendment note
Subsec. (n)(1)(A). Pub. L. 117–167, § 10252(b)(5), inserted “United States-based” before “small”.Enacted provision · exact public law section
(5) in subsection (n)(1)(A), by inserting “United States-based” before “small”.Pub. L. 117–286 § 4(a)(65)(A) · 136 Stat. 4196
Substituted · 15 U.S.C. § 278k(m)(4)
Pub. L. 117–286, § 4(a)(65)(A), substituted “Applicability of chapter 10 of title 5” for “FACA applicability” in heading
Source evidence
Code amendment note
Subsec. (m)(4). Pub. L. 117–286, § 4(a)(65)(A), substituted “Applicability of chapter 10 of title 5” for “FACA applicability” in heading.Enacted provision · exact public law section
(A) in the paragraph heading, by striking “FACA applicability” and inserting “Applicability of chapter 10 of title 5, united states code,”;Pub. L. 117–286 § 4(a)(65)(B) · 136 Stat. 4196
Substituted · 15 U.S.C. § 278k(m)(4)(A)
Pub. L. 117–286, § 4(a)(65)(B), substituted “chapter 10 of title 5.” for “the Federal Advisory Committee Act (5 U.S.C. App.).”
Source evidence
Code amendment note
Subsec. (m)(4)(A). Pub. L. 117–286, § 4(a)(65)(B), substituted “chapter 10 of title 5.” for “the Federal Advisory Committee Act (5 U.S.C. App.).”Enacted provision · exact public law section
(B) in subparagraph (A), by striking “the Federal Advisory Committee Act (5 U.S.C. App.).” and inserting “chapter 10 of title 5, United States Code.”; andPub. L. 117–286 § 4(a)(65)(C) · 136 Stat. 4196
Substituted · 15 U.S.C. § 278k(m)(4)(B)
Pub. L. 117–286, § 4(a)(65)(C), substituted “Section 1013 of title 5” for “Section 14 of the Federal Advisory Committee Act”
Source evidence
Code amendment note
Subsec. (m)(4)(B). Pub. L. 117–286, § 4(a)(65)(C), substituted “Section 1013 of title 5” for “Section 14 of the Federal Advisory Committee Act”.Enacted provision · exact public law section
(C) in subparagraph (B), by striking “Section 14 of the Federal Advisory Committee Act” and inserting “Section 1013 of title 5, United States Code,”.
46 of 46 references resolved to an enrolled provision
Editorial Notes
References in Text
Subsections (c) and (d) of section 278i of this title, referred to in subsec. (m)(5)(B), which related to 3-year programmatic planning documents and annual updates, were repealed by Pub. L. 114–329, title II, § 204(a)(1)(B)(i), , 130 Stat. 2998.
Amendments1992–2022 · 7 rounds
2022
Subsec. (a)(5). Pub. L. 117–167, § 10252(b)(1), struck out “or consortium thereof,” before “an institution of higher education” and inserted “or a consortium thereof” before period at end.
Subsec. (a)(6) to (8). Pub. L. 117–167, § 10255(1)–(4), added pars. (6) defining historically Black college and university and (7) defining institution of higher education and redesignated former pars. (6) defining Hollings Manufacturing Extension Partnership or Program and (7) defining MEP Advisory Board as (7) and (8), respectively.
Subsec. (a)(9) to (11). Pub. L. 117–167, § 10255(5), added pars. (9) to (11).
Subsec. (c)(4). Pub. L. 117–167, § 10252(b)(2), inserted “United States-based” before “industrial”.
Subsec. (c)(6). Pub. L. 117–167, § 10252(d)(1)(A), substituted “secondary schools, community colleges, and area career and technical education schools, including those in underserved and rural communities,” for “community colleges and area career and technical education schools”.
Subsec. (c)(7). Pub. L. 117–167, § 10252(d)(1)(B), substituted “local secondary schools and local colleges, including historically Black colleges and universities, Tribal Colleges or Universities, minority-serving institutions, community colleges, and secondary schools and colleges in underserved and rural communities,” for “and local colleges” and inserted “or other applied learning opportunities” after “apprenticeships”.
Subsec. (d)(1). Pub. L. 117–167, § 10252(b)(3)(A), inserted “at United States-based industrial facilities, including small and medium manufacturing companies” before “based”.
Subsec. (d)(2). Pub. L. 117–167, § 10252(b)(3)(B), inserted “United States-based” before “companies”.
Subsec. (d)(3). Pub. L. 117–167, § 10252(d)(2), substituted “and local high schools, community colleges, and area career and technical education schools, including those in underserved and rural communities,” for “, community colleges, and area career and technical education schools,”.
Pub. L. 117–167, § 10252(b)(3)(C), inserted “United States-based” before “small”.
Subsec. (f)(5)(B)(i). Pub. L. 117–167, § 10252(b)(4), inserted before semicolon at end “in the United States”.
Subsec. (l). Pub. L. 117–167, § 10252(a), amended subsec. (l) generally. Prior to amendment, text read as follows: “In addition to such sums as may be appropriated to the Secretary and Director to operate the Program, the Secretary and Director may also accept funds from other Federal departments and agencies and from the private sector under section 272(c)(7) of this title, to be available to the extent provided by appropriations Acts, for the purpose of strengthening United States manufacturing.”
Subsec. (m)(4). Pub. L. 117–286, § 4(a)(65)(A), substituted “Applicability of chapter 10 of title 5” for “FACA applicability” in heading.
Subsec. (m)(4)(A). Pub. L. 117–286, § 4(a)(65)(B), substituted “chapter 10 of title 5.” for “the Federal Advisory Committee Act (5 U.S.C. App.).”
Subsec. (m)(4)(B). Pub. L. 117–286, § 4(a)(65)(C), substituted “Section 1013 of title 5” for “Section 14 of the Federal Advisory Committee Act”.
Subsec. (n)(1)(A). Pub. L. 117–167, § 10252(b)(5), inserted “United States-based” before “small”.
2017
Pub. L. 114–329 amended section generally. Prior to amendment, section related to establishment of regional centers for the transfer of manufacturing technology, the MEP Advisory Board, a competitive grant program, and an innovative services initiative.
2011
Subsec. (a). Pub. L. 111–358, § 404(f)(3)(A), substituted “regional centers for the transfer of manufacturing technology” for “Regional Centers for the Transfer of Manufacturing Technology” in introductory provisions.
Subsec. (a)(6). Pub. L. 111–358, § 404(a), added par. (6).
Subsec. (c)(7), (8). Pub. L. 111–358, § 404(d), added pars. (7) and (8).
Subsec. (e)(4). Pub. L. 111–358, § 404(e), amended par. (4) generally. Prior to amendment, text read as follows: “In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with the Federal Advisory Committee Act.”
Subsec. (f)(3). Pub. L. 111–358, § 703(a), substituted “to add capabilities to the MEP program, including the development of” for “to develop” and “Centers may be reimbursed for costs incurred under the program. These themes—” for “These themes shall be related to projects associated with manufacturing extension activities, including supply chain integration and quality management, and including the transfer of technology based on the technological needs of manufacturers and available technologies from institutions of higher education, laboratories, and other technology producing entities, or extend beyond these traditional areas.” and added subpars. (A) to (C).
Pub. L. 111–358, § 404(i), substituted “Director of the Hollings MEP program,” for “Director of the Centers program,”.
Subsec. (f)(5). Pub. L. 111–358, § 703(b), amended par. (5) generally. Prior to amendment, text read as follows: “Awards under this subsection shall be peer reviewed and competitively awarded. The Director shall select proposals to receive awards—
“(A) that utilize innovative or collaborative approaches to solving the problem described in the competition;
“(B) that will improve the competitiveness of industries in the region in which the Center or Centers are located; and
“(C) that will contribute to the long-term economic stability of that region.”
Subsec. (f)(7). Pub. L. 111–358, § 703(c), added par. (7) relating to duration.
Subsec. (f)(8), (9). Pub. L. 111–358, § 703(c), added pars. (8) and (9).
Subsec. (g). Pub. L. 111–358, § 404(b), added subsec. (g).
Subsec. (h). Pub. L. 111–358, § 404(c), added subsec. (h).
Subsec. (i). Pub. L. 111–358, § 404(f)(1), added subsec. (i).
Subsec. (j). Pub. L. 111–358, § 404(f)(3)(B), added subsec. (j).
Subsec. (k). Pub. L. 111–358, § 404(h), added subsec. (k).
2010
Subsec. (f)(7). Pub. L. 111–240 added par. (7) relating to global marketplace projects.
2007
Subsec. (c)(3). Pub. L. 110–69, § 3003(a), amended par. (3) generally. Prior to amendment, par. (3) read as follows: “Any nonprofit institution, or group thereof, or consortia of nonprofit institutions, including entities existing on , may submit to the Secretary an application for financial support under this subsection, in accordance with the procedures established by the Secretary and published in the Federal Register under paragraph (2). In order to receive assistance under this section, an applicant shall provide adequate assurances that it will contribute 50 percent or more of the proposed Center’s capital and annual operating and maintenance costs for the first three years and an increasing share for each of the last three years. Each applicant shall also submit a proposal for the allocation of the legal rights associated with any invention which may result from the proposed Center’s activities.”
Subsec. (c)(5). Pub. L. 110–69, § 3003(b), inserted “A Center that has not received a positive evaluation by the evaluation panel shall be notified by the panel of the deficiencies in its performance and shall be placed on probation for one year, after which time the panel shall reevaluate the Center. If the Center has not addressed the deficiencies identified by the panel, or shown a significant improvement in its performance, the Director shall conduct a new competition to select an operator for the Center or may close the Center.” after “at declining levels.”
Subsec. (d). Pub. L. 110–69, § 3003(c), added subsec. (d) and struck out former subsec. (d). Text of former subsec. (d) read as follows: “In addition to such sums as may be authorized and appropriated to the Secretary and Director to operate the Centers program, the Secretary and Director also may accept funds from other Federal departments and agencies for the purpose of providing Federal funds to support Centers. Any Center which is supported with funds which originally came from other Federal departments and agencies shall be selected and operated according to the provisions of this section.”
Subsec. (e). Pub. L. 110–69, § 3003(d), added subsec. (e).
Subsec. (f). Pub. L. 110–69, § 3003(e), added subsec. (f).
1998
Subsec. (c)(5). Pub. L. 105–309 substituted “. After the sixth year, a Center may receive additional financial support under this section if it has received a positive evaluation through an independent review, under procedures established by the Institute. Such an independent review shall be required at least every two years after the sixth year of operation. Funding received for a fiscal year under this section after the sixth year of operation shall not exceed one third of the capital and annual operating and maintenance costs of the Center under the program.” for “, which are designed to ensure that the Center no longer needs financial support from the Institute by the seventh year. In no event shall funding for a Center be provided by the Department of Commerce after the sixth year of the operation of a Center.”
1992
Subsec. (c)(6). Pub. L. 102–245, § 105(e)(1), inserted before period at end “except for contracts for such specific technology extension or transfer services as may be specified by statute or by the Director”.
Subsec. (d). Pub. L. 102–245, § 105(e)(2), amended subsec. (d) generally. Prior to amendment, subsec. (d) read as follows: “There are authorized to be appropriated for the purposes of carrying out this section, a combined total of not to exceed $40,000,000 for fiscal years 1989 and 1990. Such sums shall remain available until expended.”
Statutory Notes and Related Subsidiaries
Change of Name
Pub. L. 108–447, div. B, title II, , 118 Stat. 2879, which in part renamed the Manufacturing Extension Partnership Program authorized under this section as the Hollings Manufacturing Partnership Program and which named the centers established and receiving funding under former subsec. (a) of this section the Hollings Manufacturing Extension Centers, was repealed by Pub. L. 111–358, title IV, § 404(f)(2), , 124 Stat. 4002.
Savings Provisions
Pub. L. 114–329, title V, § 501(f), , 130 Stat. 3033, provided that: “Notwithstanding the amendments made by subsections (a) [sic; subsec. (a) is set out as a Short Title of 2017 Amendment note under section 271 of this title] and (b) of this section [amending this section], the Secretary of Commerce may carry out section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k) as that section was in effect on the day before the date of enactment of this Act [], with respect to existing grants, agreements, cooperative agreements, or contracts, and with respect to applications for such items that are received by the Secretary prior to the date of enactment of this Act.”
Resource Optimization
Pub. L. 117–167, div. B, title II, § 10251(b), , 136 Stat. 1498, provided that: “Of amounts authorized for the Hollings Manufacturing Extension Partnership program under section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k), the Secretary [of Commerce] shall optimize funding across sections 25 and 25A of such Act [15 U.S.C. 278k, 278k–1], as well as the program established under section 25B of such Act [15 U.S.C. 278k–2] (as added by subsection (a)), to the extent practicable and subject to the availability of appropriations, in order to maximize Center (as such term is defined in such section 25) participation as well as competitiveness, productivity, and technological performance in United States manufacturing.”
Patent Rights
Pub. L. 114–329, title V, § 501(g), , 130 Stat. 3033, provided that: “The provisions of chapter 18 of title 35, United States Code, shall apply, to the extent not inconsistent with section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k) and section 25 [sic] of that Act, to the promotion of technology from research by Centers under those sections, except for contracts for such specific technology extension or transfer services as may be specified by the Director of NIST [National Institute of Standards and Technology] or under other law.”
Findings
Pub. L. 111–358, title VII, § 702, , 124 Stat. 4041, provided that:
“Congress finds the following:
“(1) Over its 20-year existence, the Hollings Manufacturing Extension Partnership has proven its value to manufacturers as demonstrated by the resulting impact on jobs and the economies of all 50 States and the Nation as a whole.
“(2) The Hollings Manufacturing Extension Partnership has helped thousands of companies reinvest in themselves through process improvement and business growth initiatives leading to more sales, new markets, and the adoption of technology to deliver new products and services.
“(3) Manufacturing is an increasingly important part of the construction sector as the industry moves to the use of more components and factory built sub-assemblies.
“(4) Construction practices must become more efficient and precise if the United States is to construct and renovate its building stock to reduce related carbon emissions to levels that are consistent with combating global warming.
“(5) Many companies involved in construction are small, without access to innovative manufacturing techniques, and could benefit from the type of training and business analysis activities that the Hollings Manufacturing Extension Partnership routinely provides to the Nation’s manufacturers and their supply chains.
“(6) Broadening the competitiveness grant program under [former] section 25(f) of the National Institute of Standards and Technology Act ([former] 15 U.S.C. 278k(f), now see 15 U.S.C. 278k–1) could help develop and diffuse knowledge necessary to capture a large portion of the estimated $100 billion or more in energy savings if buildings in the United States met the level and quality of energy efficiency now found in buildings in certain other countries.
“(7) It is therefore in the national interest to expand the capabilities of the Hollings Manufacturing Extension Partnership to be supportive of the construction and green energy industries.”
Agreements and Contributions for Collective Research and Development Initiatives
Pub. L. 108–7, div. B, title II, , 117 Stat. 73, provided in part: “That hereafter the Secretary of Commerce is authorized to enter into agreements with one or more nonprofit organizations for the purpose of carrying out collective research and development initiatives pertaining to [former] 15 U.S.C. 278k paragraph (a), and is authorized to seek and accept contributions from public and private sources to support these efforts as necessary.”
Similar provisions were contained in the following prior appropriation act:
Additional Renewal of Federal Financial Assistance for Centers
Pub. L. 105–277, div. A, § 101(b) [title II], , 112 Stat. 2681–50, 2681–83, which provided that Federal financial assistance awarded by the Secretary of Commerce to a Regional Center for the Transfer of Manufacturing Technology could continue beyond six years and could be renewed for additional periods, not to exceed one year, at a rate not to exceed one-third of the Center’s total annual costs or the level of funding in the sixth year, whichever was less, subject before any such renewal to a positive evaluation of the Center and to a finding by the Secretary of Commerce that continuation of Federal funding to the Center was in the best interest of the Regional Centers for the Transfer of Manufacturing Technology Program, was from the Departments of Commerce Justice, and State, the Judiciary, and Related Agencies Appropriations Act, 1999, and was not repeated in subsequent appropriations Acts. Similar provisions were contained in the following prior appropriation acts:
Pub. L. 105–119, title II, , 111 Stat. 2476.
Pub. L. 104–208, div. A, title I, § 101(a) [title II], , 110 Stat. 3009, 3009–36.
Publication in Federal Register
Pub. L. 100–519, title I, § 102(d), , 102 Stat. 2590, provided that the requirement of former subsec. (c)(2) of this section was met by the publication made by the National Bureau of Standards on , at 53 F.R. 27060.
Credits
1901–2022 · 9 acts
- 1901Mar. 3, 1901, ch. 872, § 25, as added Pub. L. 100–418, title V, § 5121(a), , 102 Stat. 1433
- 1992amended Pub. L. 102–245, title I, § 105(e), , 106 Stat. 12
- 1998Pub. L. 105–309, § 2, , 112 Stat. 2935
- 2007Pub. L. 110–69, title III, § 3003, , 121 Stat. 587
- 2010Pub. L. 111–240, title IV, § 4226(a), , 124 Stat. 2598
- 2011Pub. L. 111–358, title IV, § 404(a)–(f)(1), (3), (h), (i), title VII, § 703, , 124 Stat. 4001–4003, 4042
- 2017Pub. L. 114–329, title V, § 501(b), , 130 Stat. 3023
- 2022Pub. L. 117–167, div. B, title II, §§ 10252(a), (b), (d), 10255, , 136 Stat. 1499, 1503
- 2022Pub. L. 117–286, § 4(a)(65), , 136 Stat. 4312.
Show as published
(Mar. 3, 1901, ch. 872, § 25, as added Pub. L. 100–418, title V, § 5121(a), , 102 Stat. 1433; amended Pub. L. 102–245, title I, § 105(e), , 106 Stat. 12; Pub. L. 105–309, § 2, , 112 Stat. 2935; Pub. L. 110–69, title III, § 3003, , 121 Stat. 587; Pub. L. 111–240, title IV, § 4226(a), , 124 Stat. 2598; Pub. L. 111–358, title IV, § 404(a)–(f)(1), (3), (h), (i), title VII, § 703, , 124 Stat. 4001–4003, 4042; Pub. L. 114–329, title V, § 501(b), , 130 Stat. 3023; Pub. L. 117–167, div. B, title II, §§ 10252(a), (b), (d), 10255, , 136 Stat. 1499, 1503; Pub. L. 117–286, § 4(a)(65), , 136 Stat. 4312.)